1. Introduction
Thank you for purchasing the SinoTrack GPS tracker. This manual provides detailed instructions on how to operate your device smoothly and efficiently. Please read it carefully before use. Note that manual updates may occur without prior notice, with the latest version released alongside product sales. The manufacturer is not responsible for any errors or omissions in this manual.
Working on existing GSM/GPRS networks and GPS satellites, this product enables you to locate and monitor remote targets via SMS, mobile application, and the internet. It utilizes advanced GPS and A-GPS dual positioning technology for accuracy.
2. Product Overview
The SinoTrack GPS tracker is designed for versatile tracking applications, featuring a robust build and long-lasting battery. Key features include:
- Real-time Tracking
- History Route Playback
- Waterproof (IP65 rating)
- Geo-fence capabilities
- Overspeed Alarm
- Shocking Alarm
- Sleep Mode for power saving
- Built-in 5000mAh or 10000mAh Battery
- Free Mobile Application
- Built-in Powerful Magnet for easy installation
3. Specifications
| Content | Specs. |
|---|---|
| Dimensions (ST-905) | 80*68*22mm |
| Dimensions (ST-915) | 80*68*40mm |
| Dimensions (ST-925) | 112*78*45mm |
| Weight | 150g (ST-905), 300g (ST-915), 500g (ST-925) |
| Network | GSM/GPRS (4G+2G compatible) |
| Band | 850/900/1800/1900Mhz |
| GPS sensitivity | -159dBm |
| GPS accuracy | 5m |
| Charging input | DC 5V==1.0A |
| Battery (ST-905) | 3.7V 5000mAh Li-ion battery |
| Battery (ST-915) | 3.7V 10,000mAh Li-ion battery |
| Battery (ST-925) | 3.7V 20,800mAh Li-ion battery |
| Standby Time | 60 days (ST-905), 120 days (ST-915), 240 days (ST-925) |
| Storage Temperature | -40°C to +85°C |
| Operation Temperature | -20°C to +55°C |
| Humidity | 5%--95% non-condensing |
| Certifications | CE, FCC |
4. Setup
4.1. Hardware Description (ST-915 as example)
4.2. SIM Card Installation Guide
Important: Only GSM SIM cards work with this model. If using a 3G or 4G card, ensure it has GSM functionality. The SIM card must not have a PIN code enabled.
- Open the rubber cover on the device.
- Insert the SIM card (chip up) into the designated slot.
- The indicator light will turn on when the SIM card is correctly inserted.
The device will acquire GPS location when a GPS signal is available, and LBS location when there is no GPS signal. The device automatically turns off when the SIM card is removed.
4.3. Indicator Light Status
| INDICATOR LIGHT | MEANING |
|---|---|
| Yellow light - Solid | GPRS connection |
| Yellow light - Flash | No GPRS signal |
| Blue light - Solid | GPS connection |
| Blue light - Flash | No GPS signal |
4.4. Admin Number Setting
Set an admin number to receive alerts from the tracker (e.g., over-speed, shake sensor, low battery alarms).
- Command:
phone number+password 1(Your mobile phone number, not the tracker's SIM number.) - Example:
132657901800000 1 - Reply:
SET OK!
To cancel the admin number:
- Command:
D101# - Reply:
SET OK!
4.5. APN Settings
Each SIM card carrier has its own APN (Access Point Name) content. You can find this by checking your SIM card carrier online or by inserting the SIM card into a mobile phone.
- Command:
8030000 APN(Replace APN with your carrier's APN) - Example: For MTN SIM card (South Africa) with APN 'internet':
8030000 internet
If the APN requires a username and password:
- Command:
8030000 APN APNuser APNpassword - Example: For Tesco Mobile (UK) with APN 'prepay.tesco-mobile.com', username 'tescowap', password 'password':
8030000 prepay.tesco-mobile.com tescowap password
4.6. IP and Port Settings
To set the tracker to our server:
- Command:
8040000 IP PORT - Example:
8040000 45.112.204.246 8090
5. Operating Instructions
5.1. SMS Tracking
Call the SIM card phone number in the tracker, and you will receive a Google Maps link of its position. Alternatively, send the message "6690000" to the tracker's SIM card number.
Example SMS Reply:
http://maps.google.com/maps? q=+22.64212, +114.18814 Date: 2017-12-6 Time:1:45 ID: 6170999999 Fix:V Speed:0.0KM/H Bat:80%
5.2. Device Working Modes
The tracker supports three working modes, affecting battery life:
- WORK (Keep working mode): The tracker continuously works and sends data by time interval.
- Battery Life: Approximately 7 days per 10000mAh (4G usage may reduce this by 20%).
- Command:
WORK0000 - Reply:
SET OK! - MOVE (Work when moving): The tracker only works when it is moving. When stopped, it enters sleep mode, GPS shuts off, and GSM operates in low consumption mode. Vibration, SMS commands, or calling the tracker can wake it up for 5 minutes. (Factory default setting)
- Battery Life: Approximately 30 days per 10000mAh.
- Command:
MOVE0000 - Reply:
SET OK! - STANDBY (SMS or Call to tracker): The tracker remains in standby mode, with GPS shut off and GSM in low consumption. It will work for 5 minutes upon receiving an SMS or call.
- Battery Life: Approximately 120 days per 10000mAh.
- Command:
STANDBY0000 - Reply:
SET OK!
5.3. Alarm Settings
Over-speed Alarm Setting:
- Command:
1220000 070(Sets alarm at 70km/h) - Reply:
SET OK!
When the unit speed exceeds the set limit, it will send a "speed alarm!" message to the admin number every 5 minutes.
To cancel over-speed alarm:
- Command:
12200000 - Reply:
SET OK!
Shake Alarm Setting:
- Command:
1810000T10 - Reply:
SET OK!
The tracker must be stationary for 5 minutes for this function to work. It will send an SMS "Shock alarm!" to the admin number when shocked.
To cancel shake alarm:
- Command:
1800000 - Reply:
SET OK!
Take-off Alarm Setting (Anti-removal): (Factory default setting is ON)
There is an anti-removal induction sensor on the back of the device. If this sensor is not covered, it will send "Take off Alarms!" to the admin number and SOS number via SMS.
- To enable:
TAKEOFF0000 1 - To cancel:
TAKEOFF0000 0 - Reply:
SET OK!
5.4. Terminal (Local) Time Setting
The factory setting is GMT 0.
- Command:
8960000E00(Example for GMT+0) - Example for GMT+1:
8960000E01 - Example for GMT-1:
8960000W01 - Reply:
SET OK!
5.5. Reset Hardware
- Command:
RESET - Reply:
SET OK!
5.6. Read Configuration Data (RCONF)
This command allows you to read the current configuration of the tracker, including ID, work mode, IP and Port, and APN.
- Command:
RCONF - Reply: A message containing the tracker's settings.
Explanation of RCONF Parameters:
ST-915, ID:6180127780, UP: 0000,U1:, U2:, U3:, MODE:GPRS- MOVE, DAILY:OFF, GEO FENCE:OFF, OVER SPEED:OFF, VOICE:ON, SHAKE ALARM:OFF, SLEEP:ON, APN:interne t,,, IP:45.112.204.242:8090,GPRS UPLOAD TIME:30, TIME ZONE:0.0
- ST-915: Model of the tracker.
- ID:6180127780: The ID of the GPS Tracker.
- UP:0000: The password for SMS commands.
- U1:,U2:,U3:: Control numbers.
- MODE:GPRS-MOVE: GPS work mode (e.g., MOVE).
- DAILY:OFF, GEO FENCE:OFF, OVER SPEED:OFF, VOICE:ON, SHAKE ALARM:OFF, SLEEP:ON: Status of various tracker features.
- APN:internet: APN of the SIM Card.
- IP:45.112.204.246:8090: The IP and Port of the tracker server.
- GPRS UPLOAD TIME:30: The GPS time interval for data upload (in seconds).
- TIME ZONE:0.0: Time zone of the tracker.
5.7. Online Tracking (Website & App)
You can track your device via the SinoTrack website or mobile application.
- Website Platform: Pro.SinoTrack.com
- User Name: ID on the tracker
- Password: 123456 (Default)
For mobile applications, search for "SinoTrack PRO" on the App Store (iOS) or Google Play (Android), or download via the QR code below.
5.8. Multiple Devices in One Account
If you have multiple SinoTrack GPS trackers and wish to manage them under a single account, please contact SinoTrack customer support. They can create a group account for you, allowing you to monitor all your devices on the platform simultaneously.
5.9. Voice Monitoring
The device supports voice monitoring. The RCONF command output indicates VOICE:ON. Specific commands for voice monitoring (e.g., command 66) may be available. Please refer to the latest official documentation or contact support for detailed instructions on activating and using this feature.
6. Maintenance
- Ensure the device is fully charged before initial use and regularly thereafter to maintain optimal performance.
- Do not disassemble or modify the device. Unauthorized modifications can void the warranty and cause damage.
- Keep the device away from extreme temperatures, direct sunlight, and corrosive materials.
- Ensure the rubber cover for the SIM card slot is properly sealed to maintain its waterproof rating.
- Clean the device with a soft, dry cloth. Avoid using harsh chemicals or solvents.
- For optimal GPS signal reception, ensure the device has a clear view of the sky.
7. Troubleshooting (FAQ)
| FAQ | Instructions/Solutions |
|---|---|
| Fail to turn it on |
|
| No GSM signal |
|
| No GPS | A more open view of the sky is recommended to ensure the device can receive the GPS signal normally. |
| No reply to SMS | Password is wrong or the command format is incorrect. |
| No reply to calling & No alarm message | Authorized / admin phone number is incorrect or has not been set up. |
| SMS position OK, cannot use the APP and web platform | Check if APN is correctly set. Find the correct APN content for your SIM card (refer to Section 4.5). |
| Platform position is different from the actual position. |
|
8. User Tips
- Installation: The device is heavy-duty and features strong magnets. While it can be installed externally, consider installing it inside the vehicle for better protection and discretion.
- SIM Card: Ensure your SIM card has both internet and SMS packages for full functionality. Some basic plans might only allow SMS tracking.
- Setup Assistance: If you encounter difficulties during setup, refer to the official user manual PDF for more detailed instructions or contact SinoTrack customer support. They are known to be helpful with commands and setup.
- Accuracy & Battery: Users report excellent tracking accuracy and good battery life, especially when utilizing the power-saving modes (MOVE or STANDBY).
- Size Consideration: The device can be quite large, which is a factor to consider for discreet placement.
- IMEI Number: The IMEI number is typically found on the device itself or its packaging. It is crucial for registration and support.
9. Warranty and Support
For detailed warranty information, technical support, or further inquiries, please refer to the official SinoTrack user manual PDF available at SinoTrack User Manual (PDF) or visit the SinoTrack Official Store online.
SinoTrack is a certified brand committed to genuine items. For any issues, please contact the seller or SinoTrack support directly.