NETUM NT-5090 1D 2D QR Desktop Barcode Scanner User Manual

Introduction

Thank you for choosing the NETUM NT-5090 Desktop Barcode Scanner. This hands-free USB wired scanner is designed for efficient and accurate decoding of 1D, 2D, and QR codes, making it ideal for various applications such as supermarkets, retail stores, libraries, and more. This manual provides detailed instructions for setup, operation, and troubleshooting to ensure optimal performance.

Setup

The NT-5090 scanner is designed for plug-and-play operation, requiring no additional drivers or software for basic functionality.

1. Connect the USB Cable: Connect the scanner to your computer or POS system via the provided USB cable.
2. Power-On Confirmation: Upon successful connection, you will hear a power-on prompt sound, indicating the scanner is ready to read and transmit data.
3. Default Settings: The scanner is factory programmed with common terminal and communication settings. By default, it operates in USB-HID communication mode and Auto-induction trigger mode.

Operating Instructions

The NT-5090 features an auto-induction mode and supports various configurations via programming barcodes.

Basic Operation

• Auto-Induction Mode: The scanner automatically detects barcodes when they pass through the scanning window, decodes them, and uploads the data to your connected device.
• Voice Broadcast: The scanner includes built-in high-power speakers to support voice broadcast, improving work efficiency, especially in busy environments.
• Fill Light: Equipped with a fill light, the scanner performs well in low light conditions.

Advanced Configuration (Scanning Programming Barcodes)

To change advanced settings, scan the appropriate programming barcodes found in the full user manual (PDF) or as described below. An asterisk (*) indicates the default setting.

Communication Port

Scan one of the following barcodes to switch the connection mode. If using USB COM Port Emulation, a driver might be required.

• *USB-HID

  (Scan this barcode to set USB-HID mode, default)

• COM Port

  (Scan this barcode to set COM Port mode)

• TTL-232

  (Scan this barcode to set TTL-232 mode)

• HID&TTL

  (Scan this barcode to set HID&TTL mode)

Trigger Mode

Scan one of the following barcodes to change the trigger mode.

• *Auto-induction

  (Scan this barcode to set Auto-induction mode, default)

• Continuously Mode

  (Scan this barcode to set Continuously Mode)

Keyboard Language

If your keyboard layout is different from American English, scan the corresponding barcode below. Ensure your cursor is in the desired output location before scanning.

• *America EN Keyboard

  (Scan this barcode for American English keyboard, default)

• French Keyboard

  (Scan this barcode for French keyboard)

• Germany Keyboard

  (Scan this barcode for German keyboard)

• JP Keyboard

  (Scan this barcode for Japanese keyboard)

• Mexican keyboard (Latin American)

  (Scan this barcode for Mexican/Latin American keyboard)

• Spain Keyboard

  (Scan this barcode for Spanish keyboard)

Terminator

Configure the terminating character suffix by scanning the appropriate barcode.

• No terminator

  (Scan this barcode to disable terminator)

• CR

  (Scan this barcode to add Carriage Return)

• TAB

  (Scan this barcode to add Tab)

• CR&LF

  (Scan this barcode to add Carriage Return & Line Feed)

Beep Volume

Adjust the scanner's beep volume by scanning the relevant barcode.

• *Enable

  (Scan this barcode to enable beep, default)

• Disable

  (Scan this barcode to disable beep)

• Volume Down

  (Scan this barcode to decrease volume)

• Volume Up

  (Scan this barcode to increase volume)

Factory Restore

To restore all settings to their factory defaults, scan the following barcode:

• Factory Restore

  (Scan this barcode to restore factory settings)

Firmware Version

To display the current firmware version of your scanner, scan the following barcode:

• Firmware version

  (Scan this barcode to display firmware version)

Maintenance

To ensure the longevity and optimal performance of your NETUM NT-5090 barcode scanner, follow these simple maintenance guidelines:

• Cleaning: Regularly wipe the scanning window and the scanner's body with a soft, dry, lint-free cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
• Cable Care: Ensure the USB cable is not bent sharply or subjected to excessive strain, which can damage the internal wiring.
• Storage: When not in use, store the scanner in a clean, dry environment away from direct sunlight and extreme temperatures.

Troubleshooting (FAQ)

Here are solutions to common issues you might encounter with your barcode scanner:

1. Some barcodes cannot be read, why?

• Condition of Barcode: Dirty or unclear barcodes might not be read. Ensure barcodes are clean and clearly printed.
• Barcode Type Settings: The scanner's settings for some less common barcode types might be off by default. You may need to activate a specific barcode type to enable scanning. Refer to the full manual or contact support for assistance.

2. How to change terminator to TAB?

Refer to the "Terminator" section in this manual or the full user manual (PDF) for programming barcodes to change the terminator character.

3. Are there any barcodes for applying or removing prefix & suffix?

Yes, programming barcodes for prefix and suffix settings are available. Please refer to the "prefix and suffix" section in the full user manual downloaded from www.netum.net or contact customer service.

4. How to solve the messy code problem encountered while using other foreign languages?

The default language is English. To resolve messy code issues with other languages, refer to the "Keyboard Language" section in this manual or the full user manual to change the language setting.

5. Why can't the scanner read Italy Pharmacy code?

Download the full user manual from www.netum.net. Locate the section on "Code32" and scan the "Enable Code32" programming barcode to enable the scanner to read Italy pharmacy codes.

6. Why can't the scanner read add-on 2 or 5 codes?

Download the full user manual from www.netum.net. Refer to the "ADD-Oncode" section and scan the appropriate command barcode to enable the scanner to read these codes.

Specifications

User Tips

• For optimal performance in high-traffic environments, leverage the scanner's hands-free auto-sensing mode to quickly process items without manual triggering.
• If you frequently scan barcodes from mobile phone screens, ensure the screen brightness is adequate for best decoding results.
• Keep a printed copy of the programming barcodes (especially for factory reset and common settings) handy for quick adjustments.

Warranty and Support

For any further configurations, technical support, or warranty inquiries, please do not hesitate to contact NETUM customer service.

Contact Information

• Telephone: +0086 20-3222-8813
• WhatsApp (EU/AU/AE): +86 188 2626 1132
• Email (EU/AU/AE): service@netum.net
• WhatsApp (US/CA/SA): +86 131 0672 1020
• Email (US/CA/SA): support@netum.net

Manufacturer Address: Room 301, 6th Floor and full 3rd Floor, Building 1, No. 51 Xiangshan Avenue, Ningxi Street, Zengcheng District, Guangzhou City, Guangdong Province, China

EU/UK Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK T23 AT2P, IRELAND

Full User Manual: A comprehensive user manual in PDF format is available for download. Download PDF Manual