1. Introduction
Thank you for choosing the CYCPLUS GPS Bike Computer G1. This device is designed to provide accurate cycling data including speed, distance, time, and altitude using GPS technology. Its compact, wireless design makes it a convenient companion for your rides.
2. Package Contents
Please check the box for the following items:
- CYCPLUS G1 Bike Computer x1
- Bike Computer Mount x1
- Rubber Pad x1
- Instruction Manual x1
- Rubber Band x4
- Micro USB Charging Cable x1
3. Setup
3.1. Installation
- Place the rubber pad on your handlebar or stem where you intend to mount the computer.
- Position the bike computer mount over the rubber pad.
- Secure the mount to the handlebar/stem using the provided rubber bands. Cross-fix the mount by wrapping the rubber bands diagonally around the mount and handlebar for a secure fit.
- Slide the CYCPLUS G1 Bike Computer onto the mount until it clicks into place.
3.2. First Use & Quick Start
- Power On: Long press the Power button (top button on the right side) to turn on the device.
- GPS Acquisition: Place the device outdoors with a clear view of the sky. The device will automatically search for and acquire GPS signals. This typically takes between 20 seconds to 3 minutes. The GPS signal icon will become solid once a lock is achieved.
4. Operating Instructions
4.1. Button Functions
| Button | Action | Function |
|---|---|---|
| Power Button (Top Right) | Short Press | Turn on (from off state) / Switch data display (Current Speed, Average Speed, Max Speed) |
| Long Press | Turn off | |
| Setting Button (Bottom Right) | Short Press | Switch data display (Riding Time, Riding Distance, Total Time, Odometer, O'clock, Altitude) |
| Long Press | Enter / Exit Settings Menu |
4.2. Data Display
The CYCPLUS G1 can display 9 types of cycling data:
- Speed: Current Speed, Maximum Speed, Average Speed
- Distance: Riding Distance, Odometer (Total Distance)
- Time: Riding Time, Total Time, O'clock (Current Time)
- Altitude: Current Altitude
4.3. Settings Menu
To enter the settings menu, long press the Setting Button. There are four main settings pages: C4, C6, C7, and C8. Use short presses of the Setting Button to navigate between these pages.
- C4: Time Zone Setting
When C4 is displayed, short press the Power Button to confirm. The digit will blink. Use short presses of the Setting Button to change the value (time zone offset). Short press the Power Button again to confirm and save. - C6: Unit Setting
When C6 is displayed, short press the Power Button to confirm. The unit (KMH/MPH) will blink. Use short presses of the Setting Button to toggle between KMH and MPH. Short press the Power Button again to confirm and save. - C7: Factory Reset
When C7 is displayed, short press the Power Button to confirm.