ROANJUNYH Surface Mounted Downlight LED Ceiling Light

Contents

New Nordic Surface Mounted Downlight LED Ceiling Light User Manual

Model: Surface Mounted Downlight LED Ceiling Light

Introduction

This manual provides instructions for the installation, operation, and maintenance of your new Nordic Surface Mounted Downlight LED Ceiling Light. Please read this manual thoroughly before installation and keep it for future reference.

Safety & Warnings

  • Before installation, always check if the lamp is damaged.
  • Always cut off the power before installing or replacing the lamp.
  • The lamp will generate heat during use; avoid touching it to prevent scalding. Allow the lamp to cool down completely before disassembly or replacement.
  • Keep the lamp out of reach of children. Store it in a place where children cannot access it.
  • Do not use the lamp in high-temperature, humid, or flammable environments.
  • Keep the lamp away from acids, alkalis, or harmful gases.

Specifications

Feature Detail
Product NameSurface Mounted Spotlight / Ceiling Light
BrandROANJUNYH
MaterialAluminum + PC Lampshade
Light SourceLED SMD Module
Input Voltage220V-240V, 100V-120V AC
Power Options5W, 7W, 9W, 12W, 15W, 18W
Color TemperatureWarm white (2800K-3200K), Natural white (4000K-4500K), Cold white (6000K-6500K), 3 color changes
Luminous Flux90~110LM/W (Total: 249-2000 LM)
Color Rendering Index (CRI)>Ra85
Service Life50000~80000 hours
CertificationCE, RoHS, FCC, CCC
Installation MethodSurface mounted, self-contained
Is Smart DeviceNo
FeaturesEasy to install
Is DimmableYes (for dimmable models)
Application AreaKitchen, Dining Room, Bedroom, Foyer, Study (Indoor use only)

Dimensions:

  • 5W 7W: Diameter 75mm / Height 65mm
  • 9W 12W: Diameter 85mm / Height 65mm
  • 15W 18W: Diameter 100mm / Height 65mm
Diagram showing dimensions for 5W/7W, 9W/12W, and 15W/18W lights, along with light color temperatures.
Figure 1: Product dimensions and available color temperatures (Cold white 6000-6500K, Warm white 2800-3200K, Natural white 4000-4500K).
Close-up of the light showing Yakeli transparent ring and Aluminum lamp body.
Figure 2: Detailed view of the light's components, including the Yakeli transparent ring and aluminum lamp body.

Installation Instructions

Please follow these steps carefully for proper installation:

  1. Before installation, ensure the power switch is off or the plug is unplugged. If replacing an old lamp, allow it to cool down completely before removal.
  2. Before opening the lamp package, verify that the voltage marked on the lamp matches your actual usage voltage (e.g., 220V-240V or 100V-120V). If you have a low-voltage lamp (DC 12V-48V), do NOT connect it directly to 220V or 110V AC power, as this will burn out the lamp.
  3. Open the lamp package and remove any protective film.
  4. Rotate the circular base plate counter-clockwise to detach it from the lamp body.
  5. Fix the circular base plate to the ceiling using screws.
  6. Connect the electrical wires to the lamp's wires and secure them with insulating tape.
  7. Install the lamp body by rotating it clockwise onto the fixed base plate.
  8. After installation, turn on the light to check for normal operation.
  9. If you purchased a dimmable lamp, install a compatible wall dimmer to adjust the brightness.
  10. This lamp is designed for indoor use only. Do not install it outdoors or in a humid environment.
Diagram showing four steps for product installation: 1. Fix the circular ring base to the ceiling with screws. 2. Connect the wires and rotate to install the lamp. 3. Installation completed. 4. Turn on the lights.
Figure 3: Visual guide for product installation steps.

Operating Instructions

Changing Light Color (for 3-color models):

For models with 3 color changes, simply press the standard wall switch once to cycle through the available light colors: Cold white (6000K), Warm white (3000K), and Natural white (4000K).

Diagram showing how to change light color with a switch: On -> Off -> On cycles through 6000K, 3000K, and 4000K.
Figure 4: How to change light color using a standard wall switch.

Dimming (for dimmable models):

If your lamp is a dimmable model, use a compatible wall dimmer (purchased separately) to adjust the brightness of the light to your preference.

Maintenance

To clean the lamp, first turn off the power. Do not wash the lamp with water. Instead, wipe it gently with a clean, soft cloth.

Troubleshooting

The light is not on:

  • Check if the power switch is supplying power.
  • Verify that the wires are securely connected. Reconnect and fix any loose wires.
  • Confirm that the correct voltage is connected to the lamp.
  • Check if the LED module or driver is damaged. If so, it may need replacement.

Flashing lights or dim lighting:

  • Check and secure the power cord.
  • Check if the LED module or driver is damaged. If so, it may need replacement.
  • For dimming lights, ensure the dimmer is compatible with the lamp and use a dimmer that matches the light's specifications.

User Tips

No specific user tips were available from reviews or Q&A content at this time. Always refer to the installation and troubleshooting sections for guidance.

Warranty & Support

This product comes with a 3-year warranty. For any issues or support, please contact the seller or refer to the full item guides and documents available in PDF format. You can access the PDF manual here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.