GL.iNet GL-MT300N-V2

Contents

GL.iNet GL-MT300N/V2 Mango Mini Travel Router User Manual

Secure Personal Privacy Wherever You Go

GL.iNet GL-MT300N/V2 Mango Mini Travel Router

The GL.iNet GL-MT300N/V2 Mango is a compact and versatile mini travel router, offering 300Mbps Wi-Fi speed, travel-friendly design, and built-in VPN capabilities for enhanced privacy.

1. Introduction

This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your GL.iNet GL-MT300N/V2 Mango Mini Travel Router. Please read this manual carefully before using the device to ensure optimal performance and security.

The GL-MT300N/V2 Mango is a portable and flexible router designed for various internet access scenarios, including use as a router, repeater, access point, or Wi-Fi hotspot. It features a compact design, USB port for tethering or external storage, and robust security features like VPN support.

GL.iNet GL-MT300N/V2 Mango Router Diagram

Diagram illustrating the various ports and buttons on the GL-MT300N/V2 Mango router, including Power, Ethernet (WAN/LAN), USB2.0, Repair/Restore Button, Mode Switch, and indicator Lights (Wireless, Configurable, Power).

2. Setup and Initial Configuration

2.1. Power On

Plug the Micro USB power cable into the power port of the router. Ensure you are using a standard 5V/1A power adapter to prevent malfunction.

Close-up of GL.iNet Mango router showing USB and Power ports

Close-up view of the GL.iNet Mango router highlighting the USB port (tethering compatible) and the Micro USB power port, which requires a standard 5V/1A DC adapter.

2.2. Connect to the Router

You can connect to the router via Ethernet cable or Wi-Fi. This initial connection establishes a Local Area Network (LAN) with the router but does not yet provide internet access. Internet setup will follow.

2.2.1. Connect via LAN

Connect your device (e.g., computer) to the LAN port of the router using an Ethernet cable.

GL.iNet Mango router showing WAN and LAN ports

Image showing the WAN and LAN Ethernet ports on the GL.iNet Mango router, along with the power input.

2.2.2. Connect via Wi-Fi

Search for the router's SSID (Wi-Fi name) on your device and enter the default password: goodlife. The SSID is printed on the bottom label of the router, typically in the format GL-MT300N-V2-XXX.

Bottom label of GL.iNet Mango router with SSID and password

The bottom label of the GL.iNet Mango router, displaying important information such as the model (GL-MT300N-V2), input voltage (5V=1A), default IP address (192.168.8.1), SSID, and default Wi-Fi key.

2.3. Access the Web Admin Panel

Open a web browser (Chrome or Firefox recommended) and navigate to http://192.168.8.1. You will be directed to the initial setup of the web Admin Panel.

2.3.1. Language Setting

Choose your preferred display language for the Admin Panel. Supported languages include English, 简体中文, 繁體中文, Deutsch, Français, and Español.

2.3.2. Admin Password Setting

There is no default password for the Admin Panel. You must set a new password, at least 5 characters long. This password is for the web Admin Panel and the embedded Linux system, not your Wi-Fi password.

3. Operating Instructions

3.1. Internet Connection Methods

The GL.iNet Mango router supports four main connection methods to access the Internet: Cable, Repeater, 3G/4G Modem, and Tethering.

Diagram of GL.iNet Mango router internet access modes

Illustrates the four primary internet access modes for the GL.iNet Mango router: Router Mode, Repeater Mode, AP Mode, and Hotspot Mode.

3.1.1. Cable Connection

Connect the router to your modem or main router via an Ethernet cable. The router supports DHCP (default), Static IP, and PPPoE protocols. You can configure these settings in the "Internet" section of the Admin Panel.

3.1.2. Repeater Mode

Use Repeater mode to connect your router to an existing wireless network (e.g., hotel Wi-Fi). The router will create its own subnet, acting as a firewall. In the "Repeater" section, click "Scan" to find available networks, select an SSID, enter the password, and click "Join". You can also enable "Remember" to save the network.

3.1.3. USB 3G/4G Modem

Insert your SIM card into a USB 3G/4G modem and plug the modem into the router's USB port. The 3G/4G modem section will activate, allowing you to configure parameters like Device, Service Type, and APN. For host-less modems, use Tethering mode.

3.1.4. Tethering

Tethering allows you to share your smartphone's network connection with the router via a USB cable. For iPhone, enable Personal Hotspot and "Allow Others to Join", then "Trust" the computer. For Android, enable USB network sharing in Personal Hotspot settings. Select your device (e.g., eth2, usb0) in the router's Admin Panel and click "Connect".

3.2. Wireless Settings

In the "WIRELESS" section of the Admin Panel, you can manage your router's Wi-Fi network settings:

  • Wi-Fi Name (SSID): The name of your Wi-Fi network. Avoid using Unicode characters.
  • Wi-Fi Security: The encryption method for your Wi-Fi.
  • Wi-Fi Key: The password for your Wi-Fi, which must be at least 6 characters long. It is recommended to change the default password.
  • Hide SSID: Option to show or hide your Wi-Fi network name.
  • Channel: Manually select a Wi-Fi channel. If used as a repeater, the channel will be fixed to the connected network.
  • Speed: The wireless transmission speed of the router.
  • TX Power (dBm): Specifies the signal strength. Default is 20 (Strongest).

3.3. Client Management

The "CLIENTS" section allows you to view and manage all connected devices. You can see their name, IP address, MAC address, and connection type. You can also block unwanted clients and monitor real-time traffic and speed statistics.

3.4. VPN (Virtual Private Network)

GL.iNet routers come with pre-installed OpenVPN and WireGuard server and client functionalities.

3.4.1. OpenVPN Client

To set up an OpenVPN client, you need an OpenVPN configuration file (.ovpn). Upload the file (single .ovpn or a zip/tar.gz containing multiple files) in the Admin Panel. Enter a description, username, and password if required, then click "Connect" to start the VPN connection.

3.4.2. OpenVPN Server

You can set up an OpenVPN server on your GL.iNet router. Click "+ Generate a configuration file" in the Admin Panel. You can use default parameters for Local IP and Local Port or set your own. Click "Start" to activate the server.

3.4.3. WireGuard Client

WireGuard offers a fast and modern VPN solution. To set up a client, click "+ Add New Profiles" in the Admin Panel, specify a name, and input configurations (JSON or Plain Text) from your WireGuard server. You can also use specific providers like AzireVPN or Mullvad.

3.4.4. WireGuard Server

Set up a WireGuard server on your GL.iNet router (firmware 3.0+ required). Click "+ Create a New User" to add clients. You can use default Local IP and Local Port or customize them. Manage clients by viewing their configuration details (QR code, Plain Text, JSON).

3.4.5. VPN Policies

Starting from firmware version 3.022, you can define VPN routing policies. This allows you to use VPN for specific websites/IPs while maintaining normal internet traffic for others. Enable VPN Policy, choose whether to allow or not allow VPN for specific domains/IPs or MAC addresses, and apply the settings. Clear your DNS cache for immediate effect.

3.5. Applications

3.5.1. Plug-ins

The "Plug-ins" section allows you to manage OpenWrt packages, including installation and removal. Remember to click "Update" when accessing the package repository.

3.5.2. Internet Kill Switch

Available from firmware version 3.100, the Internet Kill Switch ensures that if the VPN client is not running, connected devices cannot access the internet. This requires the router to be set up as a VPN client.

3.5.3. File Sharing

GL.iNet routers support external storage devices (USB stick, MicroSD card) for file sharing among connected clients. Contents are shared to the LAN by default and are unwritable. You can modify file sharing settings in the router's Admin Panel.

To access shared content:

  • Windows: Use Samba 2.0 (SMB2.0) support. You may need to enable SMB 1.0 in Windows Features and restart the Samba service on the router via SSH. Access via \\your_router_IP.
  • Mac OS: Use Finder -> Go -> Connect to Server... and input smb://your_router_IP.
  • iOS/Android: Use a file manager app (e.g., FE File Explorer for iOS/Android) to connect to the network storage device.
  • Linux/ChromeOS: Most systems support connecting to SMB shares. For ChromeOS, "File System for Windows" app is recommended.

3.5.4. DLNA Server

The DLNA Server function is not enabled by default. To use it, install the "luci-app-minidlna" and "miniDLNA" plug-ins from the "APPLICATIONS" -> "Plug-ins" section. Ensure a TF card or USB drive is inserted before powering up the router. You can then find the OpenWrt DLNA Server on your devices (e.g., Windows Media Player, VLC for Mobile).

3.5.5. DDNS (Dynamic Domain Name Service)

DDNS maps a domain name to your router's dynamic IP address, allowing remote access. Requires firmware v3.010 or higher. Enable DDNS in "APPLICATIONS" -> "Remote Access", agree to terms, and apply. You can check if DDNS is enabled using nslookup. HTTP/HTTPS Remote Access can also be enabled, requiring a public network IP and potentially port forwarding.

3.5.6. Cloud Management (GoodCloud)

GL.iNet GoodCloud provides remote access and management for your routers. It allows you to check live status, manage devices in groups, and monitor clients. Requires firmware v3.021 or above. Add your device to GoodCloud using its DDNS/Device ID. You can set email alarms for online/offline status and new client connections.

3.5.7. Tor

Tor (The Onion Router) is a free, open-source software for anonymous communication. Tor feature is built-in from firmware V3.100. If you don't want to upgrade, free Tor firmware is available for various models. Note that Tor firmware is provided without warranty. To access the UI, the hardware switch must be on the right side (Normal Internet mode).

3.6. More Settings

The "MORE SETTINGS" section in the Admin Panel offers advanced configurations:

  • Admin Password: Change the password for the web Admin Panel.
  • LAN IP: Modify the router's LAN IP address (default is 192.168.8.1).
  • Time Zone: Set the time zone for accurate activity logging.
  • MAC Clone: Clone the MAC address of a client device to the router, useful for networks that authenticate devices by MAC address.
  • Custom DNS Server: Configure custom DNS servers to prevent DNS leaks or for other purposes. Options include DNS Rebinding Attack Protection, Override DNS Settings for All Clients, DNS over TLS, and Manual DNS Server Settings.
  • Button Settings: Configure the function of the mode switch (e.g., to toggle WireGuard/OpenVPN client).
  • Network Mode: Change the router's operating mode (Router, Access Point, Extender, WDS).
  • Revert Firmware: Revert the router to factory default settings, erasing all configurations and data.
  • Advanced: Access the Luci interface for detailed system logs and advanced configurations.

4. Maintenance

4.1. Firmware Upgrade

Regularly updating your router's firmware ensures optimal performance, security, and access to new features. Navigate to the "UPGRADE" section in the Admin Panel.

  • Online Upgrade: If your router is connected to the Internet, it can check for and download newer firmware versions automatically.
  • Upload Firmware: You can manually upload a firmware file. Drag and drop the file into the designated area. Official OpenWrt/LEDE firmware can be found on the GL.iNet website. Note: Uncheck "Keep setting" during upload to avoid issues.
  • Auto Upgrade: Enable auto-upgrade to allow the router to search for and install updates automatically at a set time.

4.2. Resetting the Router

The GL.iNet Mango router has a reset button for various functions:

  • Repair Network: Press and hold the reset button for 3 seconds, then release. This attempts to repair your network connection.
  • Factory Reset: Press and hold the reset button for 10 seconds, then release. This will restore the router to its factory default settings, clearing all user data.

Video demonstrating how to perform a factory reset on various GL.iNet routers, including the Mango (GL-MT300N-V2), by pressing and holding the reset button for 10 seconds.

5. Troubleshooting

5.1. LED Indicators

The router features LED indicators to show its status:

  • Power: Solid green LED indicates the router is powered on.
  • Wireless: Solid red LED indicates Wi-Fi is broadcasting. It flashes during wireless data transfer.
  • Configurable: This LED's behavior can be customized by the user.

5.2. Accessing the Web Admin Panel Issues

If you are unable to access http://192.168.8.1:

  • Check Connection: Ensure WAN/LAN port connections are correct and Wi-Fi SSID is correct.
  • Incorrect IP Address: If your device's IP address is incorrect, try a factory reset. If that fails, you may need to "Debrick via Uboot".
  • Correct IP Address: If your IP is correct but still no access, try using Chrome/Firefox in incognito mode (Ctrl+Shift+N) to bypass browser cache issues.

5.3. Debrick via Uboot

If your router becomes unresponsive (bricked) due to incorrect firmware flashing or other issues, you can re-install firmware using Uboot failsafe mode. This involves:

  1. Download the correct firmware file (.img for NAND flash, .bin for NOR flash) to your computer.
  2. Connect your computer to an Ethernet port (LAN or WAN) of the router. Leave the other port unconnected.
  3. Press and hold the Reset button, then power on the device.
  4. Release the button when the Power LED lights up and other LEDs start flashing (e.g., 5 times for GL-MT300N-V2).
  5. Set your computer's IP address to 192.168.1.2.
  6. Visit http://192.168.1.1 in your browser.
  7. Choose the firmware file and click "Update firmware". Do not power off during the update.
  8. After the update, revert your computer's IP settings and reconnect to the router via 192.168.8.1.

5.4. GoodCloud Issues ("Deactivated" Status)

If your device shows "Deactivated" in GoodCloud, it means it has never successfully connected to the GoodCloud server. To fix this:

  1. Ensure the router is connected to the Internet.
  2. In the router's Admin Panel, go to "APPLICATIONS" -> "Remote Access" -> "Cloud Management". Disable and then re-enable GoodCloud, clicking "Apply" after each step.
  3. Verify you are accessing the correct region in GoodCloud (Asia Pacific, America, or Europe).

5.5. EAP Wi-Fi Connection Issues

If connecting to an EAP (Extensible Authentication Protocol) Wi-Fi network, you may need to use the Luci interface for full configuration, as the main web panel might support fewer EAP types. Access Luci via "MORE SETTINGS" -> "Advanced" in the Admin Panel.

6. Specifications

Attribute Value
Brand NameGL.iNet
ModelGL-MT300N-V2 (Mango)
TypeWireless Mini Wifi Router
Max. LAN Data Rate300Mbps
Wired Transfer Rate100Mbps
Wi-Fi Transmission Standard802.11n, 802.11g, 802.11b
2.4G Wi-Fi Transmission Rate300 Mbps
Wi-Fi Supported Frequency2.4G
Supports WPSNo
Supports WDSYes
Number of USB Interfaces1 x USB 2.0
WAN Ports1 x 10/100Mbps
LAN Ports1
FunctionFirewall, VPN
ApplicationMini Wifi, Business, Travel
Antenna TypeInternal
With Modem FunctionNo
OriginMainland China
CertificationCE, FCC, RoHS, WEEE
Package Weight0.127 kg (127g)
Package Dimensions13cm x 12cm x 3cm

7. User Tips

  • Initial Setup: When booting up for the first time, the router will prompt you to select a mode (e.g., repeater). Choose the desired mode and connect to a wireless network to get started quickly.
  • VPN Configuration: The built-in OpenVPN and WireGuard clients are generally easy to set up. Many users find the VPN functionality works perfectly after initial configuration.
  • OpenWrt/LEDE: The router is highly customizable and easy to flash with OpenWrt. This allows for advanced configurations and features beyond the standard interface.
  • Portability: Its small size makes it ideal for travel. The ability to be powered by 5V (e.g., a power bank) is a significant advantage for on-the-go use.
  • PS2 OPL: For users interested in specific applications like playing PS2 via OPL, the router can be configured to support this, often requiring minimal changes.
  • File Sharing (NAS): The USB port can be used to connect an HDD, turning the router into a basic NAS for file sharing, even in hotspot configurations.
  • Micro-USB Power: While convenient for portability, some users note the micro-USB power connector as a minor downside. Ensure a stable 5V/1A power source.

8. Warranty and Support

For detailed warranty information and further technical support, please refer to the official GL.iNet documentation. A comprehensive user manual in PDF format is available for download:

Download User Manual (PDF)

For specific issues or advanced configurations, you may also visit the GL.iNet forums or contact their support team directly. If you encounter problems with OpenVPN setup, you can contact support@gl-inet.com.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.