MOES Tuya ZigBee Smart Light Switch Instruction Manual

1. Introduction

The MOES Tuya ZigBee Smart Light Switch is a versatile smart home device designed to replace traditional light switches. It operates using the ZigBee protocol and offers flexible control options, including compatibility with Smart Life App, Alexa, and Google Home. This switch is available in 1, 2, and 3 gang configurations and supports both wiring with and without a neutral wire, with the added benefit of not requiring a capacitor for most installations.

Figure 1: MOES Tuya ZigBee Smart Light Switch (1, 2, and 3 gang models)

Key Features:

• Wireless Control via Smart Life App
• All ON/All OFF functionality
• Control via ZigBee Scene Switch
• Multi-Control Association for 2-way control
• Voice Control with Alexa and Google Assistant
• Timer and Schedule functions
• Adjustable Indicator Light and Relay Status
• Device Sharing with family members
• Smart Automation and Tap-to-Run scenarios
• No capacitor needed for normal use (updated version)
• Supports wiring with and without neutral wire

2. Safety Information

WARNING: RISK OF ELECTRIC SHOCK. Electricity can cause personal injury and property damage if handled improperly. If you are unsure about any part of these instructions, please seek professional assistance from a qualified electrician.

• Do not attempt to install or repair the product by yourself unless you are qualified.
• Always turn off the power at the circuit breaker and test that power is off before wiring.
• Ensure all wire connections are securely fastened.

3. Specifications

4. Setup and Installation

4.1 Pre-installation Checklist

• A Tuya ZigBee gateway is required for intelligent controls (not included, separate purchase required).
• Ensure your Wi-Fi network is 2.4GHz.
• Confirm your wall box contains a Neutral wire if you purchased a version requiring it. If not, consult a professional electrician.

4.2 Wiring Instructions

Before starting, turn off the power at the circuit breaker and test that power is off. The wire colors indicated below are typical; your actual wiring may vary. Ensure all conductor wires are securely fastened.

Figure 2: Wiring Diagrams (With Neutral Wire and Without Neutral Wire)

With Neutral Wire (Optional): Connect the Live (L) and Neutral (N) wires as shown in the diagram. The switch will draw power from both.

Without Neutral Wire: Connect the Live (L) wire and the Load (L1, L2, L3) wires as shown. This configuration is designed to work without a neutral wire connection at the switch.

Figure 3: No Capacitor Required for MOES Smart Switch

This updated version of the switch does not require an external capacitor for normal use, eliminating potential noise from electric current and simplifying installation.

4.3 Mounting the Switch

1. After wiring, mount the switch into the wall box using the provided screws.
2. Attach the face plate.
3. Turn the power back on at the circuit breaker.

4.4 App Download and Device Pairing

1. Download the Smart Life App: Scan the QR code provided in the manual or search for "Smart Life" in your app store (Android/iOS).
2. Register/Log In: Create an account or log in if you already have one.
3. Connect to ZigBee Gateway: Ensure your Smart Life/Tuya Smart APP is successfully connected to a ZigBee gateway. If using a 5GHz Wi-Fi network, temporarily switch to a 2.4GHz network for pairing.
4. Pairing Method One (QR Code): Scan the QR code in the app to configure the network.
5. Pairing Method Two (Manual):
   1. Press and hold any button on the smart switch for about 7 seconds until the indicator light flashes rapidly. This indicates it's in pairing mode.
   2. In the Smart Life App, navigate to your ZigBee gateway page and click "Add subdevice".
   3. Confirm that the LED is blinking and proceed. The connection may take 10-120 seconds depending on network conditions.
6. Once the device is successfully added, you can edit its name and access its control page.

5. Operating Instructions

5.1 Wireless ON/OFF Control

Control your lights directly from the Smart Life App. Simply tap the virtual switch buttons to turn lights ON or OFF.

5.2 All ON/All OFF

The app allows you to turn all connected lights ON or OFF simultaneously without interference between different light circuits.

5.3 Control via ZigBee Scene Switch

You can use a separate ZigBee Scene Switch (e.g., a MOES ZigBee Scene Switch) to trigger actions on your smart light switch. This allows for flexible control modes:

• Pairing Scene Switch: Press and hold any button on the ZigBee Scene Switch for 10 seconds to enter pairing mode (LEDs will quick flash).
• Setting Actions: In the Smart Life App, you can set single click, double click, or long press actions for the scene switch buttons to control your smart light switch (e.g., single click to "switch on", double click to "switch off").

5.4 Multi-Control Association (2-Way Control)

This feature allows multiple smart switches to control a single light, creating a 2-way control setup. This is particularly useful for switches wired without a neutral wire.

1. Ensure both smart switches are successfully added to your Smart Life App.
2. For neutral wire versions, there is no need to wire the new added switch to the light; only Live (L) and Neutral (N) are required for wiring.
3. In the app, select the main switch, then navigate to "Multi-Control Association".
4. Choose the other smart switch you wish to associate and select the button to control the same light.
5. Ensure the associated switch is enabled in the app.
6. Repeat for additional switches if needed.

Figure 4: Multi-Control Association Setup

5.5 Voice Control

The smart switch is compatible with voice assistants like Amazon Alexa and Google Home. Once integrated, you can control your lights using voice commands.

• Example: "Alexa, turn on the light."

5.6 Timer and Schedule

Set schedules for individual lights or groups of devices. You can also configure countdown timers for specific actions.

5.7 Indicator Light and Relay Status Settings

Customize the behavior of the indicator light and the relay status after a power outage.

Figure 5: Relay Status Settings

• Indicator Light: Choose to turn the indicator light OFF, ON (always on), or indicate the switch's position (on when light is on, off when light is off).
• Relay Status: Set the switch to be ON, OFF, or remember its last status after a power interruption.

Figure 6: Backlight Switch Setting

5.8 Device Share

Share control of your smart switch with family members through the Smart Life App. Group control features are available for added convenience.

5.9 Smart Automation

Create smart automation routines and Tap-to-Run scenarios to integrate the switch with other smart devices for whole-house intelligence.

6. Maintenance

6.1 Storage

Products should be stored in a warehouse where the temperature is between 10℃-45℃, with a relative humidity of 70%, and in an environment free from acidic and corrosive explosive gases, dust, radiation, and strong vibrations.

6.2 Cleaning

To clean the switch, gently wipe it with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the surface.

7. Troubleshooting

• Device fails to link to the APP:
  • Ensure the router connected to the ZigBee gateway has internet access.
  • Verify the Wi-Fi signal of the gateway is strong.
  • Keep the ZigBee gateway and the smart switch within a moderate distance (e.g., less than 5 meters) for optimal signal.
  • Confirm the device is in network distribution mode (indicator flashing fast).
• Light not responding after installation:
  • Cut off the power supply and re-check all wiring connections according to the instructions.
• No reset button on the switch:
  • The reset function is typically integrated into the switch button itself. Long press the switch button to enter APP configuration/pairing mode. The power indicator light will start to blink.
• Smart switch malfunctions or doesn't respond for a long time:
  • Try resetting the device. First, remove the smart switch from your APP, then re-configure the network for use.
• Switch not detected as a ZigBee router:
  • This product is designed to function as an end device, not a ZigBee router, even if it has Live (L) and Neutral (N) connected. It will not propagate the ZigBee network.

8. User Tips

• Zigbee2mqtt Compatibility: Many users report successful integration with zigbee2mqtt. For advanced functionality, consider exploring custom firmware like 'romasku/tuya-zigbee-switch' (use with caution and at your own risk).
• Neutral Wire for Special Lights: While the switch can work without a neutral wire for normal lights, special lighting fixtures like ceiling fans with integrated lights might require a neutral wire for optimal performance.
• Response Time: When operating without a neutral wire, some users have observed a slight delay (approx. 1 second) in response time.
• Pairing with Wi-Fi Bulbs: The multi-control association feature allows for simple pairing of the ZigBee switch with Wi-Fi enabled light bulbs, enabling control without direct wiring between them.

9. Frequently Asked Questions (FAQ)

Q: Is this a Zigbee network end device or a relay (router)?

A: This device functions as a Zigbee end device. It does not act as a router to extend your Zigbee network.

Q: Does this work without a neutral wire in the UK?

A: Yes, this switch is designed to work without a neutral wire. However, for certain special lights (e.g., ceiling fans with lights), a neutral wire might be beneficial for perfect operation.

Q: Will this work with Philips HUE?

A: While both use Zigbee, direct integration with Philips Hue can sometimes be limited. It typically works best within the Tuya/Smart Life ecosystem via a compatible Zigbee hub.

Q: Does this switch work with Smart Life app?

A: Yes, the switch is designed to work seamlessly with the Smart Life app.

Q: Is there a dimming switch version available?

A: This manual describes an ON/OFF smart switch. A dimming version is not explicitly mentioned as a feature of this specific model.

Q: Can this work with MiHome or Yandex?

A: Direct compatibility with MiHome is unlikely as it's a different ecosystem. For Yandex, if it supports Tuya/Smart Life integration, then it may work indirectly through the Smart Life app.

10. Warranty and Support

10.1 Warranty Policy

• During the free warranty period, if the product breaks down during normal use, MOES will offer free maintenance.
• The warranty does not cover natural disasters, man-made equipment failures, disassembly and repair without company permission, products without a valid warranty card, or products beyond the free warranty period.
• Any commitments made by third parties (dealers/service providers) beyond the warranty scope are their responsibility.
• Please retain your warranty card to ensure your rights.

10.2 Contact Information

For support, inquiries, or to share your shopping experience, please contact MOES directly:

• Email: service@moes.com
• Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD
• Address: Power Science and Technology Innovation Center, NO.1, Longgang RD, Yueqing Economic Development Zone, Yueqing, Zhejiang, China

MOES may update or change products without notice. Please refer to the official website for the latest information.