LAUNCH X431 PRO ELITE

Contents

LAUNCH X431 PRO ELITE 8-inch Car Diagnostic Tool User Manual

Model: X431 PRO ELITE

Version: V1.00.000 | Revised date: 03-29-2023

1. Introduction

The LAUNCH X431 PRO ELITE is an advanced diagnostic tool designed for comprehensive vehicle troubleshooting. It leverages LAUNCH's cutting-edge diagnostic technology to provide accurate test results across a wide range of vehicles.

This tool facilitates full car model and full system trouble diagnosis through simple wired communication between the tablet and the vehicle. Its capabilities include Reading DTCs (Diagnostic Trouble Codes), Clearing DTCs, Reading Data Stream, Actuation Tests, and various Special Functions.

Key features include Intelligent Diagnose, Local Diagnose, Remote Diagnose, Service Functions, One-click Update, ADAS calibration, TPMS functions, access to an online Mall for additional software, Diagnostic History, Feedback, Vehicle Coverage information, and various add-on modules.

Product overview video demonstrating the LAUNCH X431 PRO ELITE's interface and capabilities.

2. Important Safety Precautions

To prevent personal injury, property damage, or accidental damage to the product, carefully read and understand all safety information before using the tool.

2.1 DANGER

  • When the engine is operating, ensure the service area is well-ventilated or use an exhaust removal system. Engines produce poisonous compounds (hydrocarbon, carbon monoxide, nitrogen oxides) that can cause slower reaction times, leading to serious injury or death.
  • Use only the included battery and power adapter. Replacing the battery with an incorrect type poses an explosion risk.
  • DO NOT operate the tool while driving. Have a second person operate the tool if necessary. Distraction can lead to accidents.

2.2 WARNING

  • Always perform automotive testing in a safe environment.
  • Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
  • Before starting the engine, place the gear lever in Neutral (manual transmission) or Park (automatic transmission) to prevent injury.
  • NEVER smoke or allow sparks or flames near the battery or engine. Do not operate the tool in explosive atmospheres (flammable liquids, gases, heavy dust).
  • Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
  • Wear ANSI-approved eye protection when testing or repairing vehicles.
  • Place blocks in front of the drive wheels and never leave the vehicle unattended while testing.
  • Exercise extreme caution around ignition coils, distributor caps, ignition wires, and spark plugs, as these components generate hazardous voltage when the engine is running.
  • To avoid damaging the tool or generating false data, ensure the vehicle battery is fully charged and the connection to the vehicle DLC (Data Link Connector) is clear and secure.
  • Automotive batteries contain sulfuric acid, which is harmful to skin. Avoid direct contact and keep ignition sources away from the battery.
  • Keep the tool dry, clean, and free from oil, water, or grease. Use a mild detergent on a clean cloth for external cleaning.
  • Keep clothing, hair, hands, tools, and test equipment away from all moving or hot engine parts.
  • Store the tool and accessories in a locked area out of reach of children.
  • Do not use the tool while standing in water.
  • Do not expose the tool or power adapter to rain or wet conditions, as water increases the risk of electric shock.
  • This tool is a sealed unit with no end-user serviceable parts. All internal repairs must be performed by an authorized repair facility or qualified technician.
  • Keep the tool away from magnetic devices, as their radiations can damage the screen and erase stored data.
  • Do not attempt to replace the internal rechargeable lithium battery; contact the dealer for factory replacement.
  • Do not disconnect the battery or any wiring cables in the vehicle when the ignition switch is on, as this can damage sensors or the ECU.
  • Do not place magnetic objects near the ECU. Disconnect the power supply to the ECU before performing any welding operations on the vehicle.
  • Use extreme caution when performing operations near the ECU or sensors. Ground yourself when disassembling PROM to prevent damage from static electricity.
  • When reconnecting the ECU harness connector, ensure it is firmly attached to prevent damage to electronic elements inside the ECU.

3. Setup and Initial Use

3.1 Package Contents

The following items are typically included in the package. Please note that accessories may vary by destination.

  • Display tablet x 1
  • Diagnostic cable x 1
  • Password envelope x 1 (contains Serial Number and Activation Code)
  • Power adapter x 1
  • Switching adapters x 2
  • Type-A to Type-C USB cable x 1
  • Quick start guide x 1
  • User manual x 1
LAUNCH X431 PRO ELITE tablet, diagnostic cable, power adapters, and user manual in a protective case.

The LAUNCH X431 PRO ELITE diagnostic tool, its protective case, and included accessories.

3.2 Components & Controls

Familiarize yourself with the main components of the diagnostic tablet:

  1. Type-C USB port: Connects to an AC outlet for charging or to a PC for data exchange.
  2. Type-A USB port: Connects to compatible add-on modules or USB storage devices.
  3. DB-15 Diagnostic connector: Connects the diagnostic cable.
  4. POWER key:
    • In Off mode, press for 3 seconds to turn the tablet on.
    • In On mode: Press once to activate/deactivate the LCD. Press and hold for 3 seconds to turn off. Press and hold for 8 seconds for forced shutdown.
  5. Charging LED: Red indicates Charging; Green indicates Fully Charged.
  6. LCD screen: Displays test results and interface.
  7. Camera flash
  8. Adjustable stand: Flips out for comfortable viewing or hanging.
  9. Rear camera
  10. Speakers

3.3 Charging & Turning On

  1. Use the included power adapter to charge the tablet.
  2. Once charging is complete, press the POWER button for 3 seconds to turn the tablet on. The system will initialize and display the home screen.

Note: If the battery is completely discharged or unused for a long time, the tool may not power on immediately. Charge it for at least 5 minutes before attempting to turn it on.

Warning: Always use the included power adapter. Using unauthorized adapters can cause damage and voids responsibility for any resulting loss.

3.4 Screen Layout and Basic Gestures

The bottom of the screen features five on-screen buttons:

  • Home: Navigates to the Android home screen.
  • Recent App: Views running applications.
  • VCI Connection: Indicates VCI device connection status.
  • Screenshot: Captures the current screen.
  • Back: Returns to the previous screen.

Basic gestures for navigation:

  • Single-tap: Selects an item or launches a program.
  • Double-tap: Zooms in on web page text to fit the screen.
  • Long press: Taps and holds until a contextual menu appears.
  • Slide: Jumps to different pages.
  • Drag: Moves application icons.
  • Spread apart/pinch together: Zooms in/out manually.

3.5 System Settings

3.5.1 Change System Language

  1. From the home screen, tap Settings > System > Language & input > Languages.
  2. Tap Add a language and select your desired language.
  3. Drag your desired language to the top of the list to apply it.

3.5.2 Adjust Brightness

  1. From the home screen, tap Settings > Display > Brightness level.
  2. Drag the slider to adjust brightness.

Note: Reducing screen brightness helps conserve battery power.

3.5.3 Set Standby Time

  1. From the home screen, tap Settings > Display > Advanced > Sleep.
  2. Choose the desired sleep time.

3.5.4 Network Setup (Wi-Fi)

The tablet has built-in Wi-Fi for online access, tool registration, software updates, and internet browsing.

  1. From the home screen, tap Settings > Network & Internet > WLAN.
  2. Slide the Wi-Fi switch to ON. The tablet will search for available wireless networks.
  3. Select a network. If it's open, the tablet connects automatically. If encrypted, enter the password.
  4. When "Connected" appears, the Wi-Fi connection is complete.

Note: Disable Wi-Fi when not needed to conserve battery power.

3.6 Register & Update

New users must complete a registration process.

  1. Launch the application from the home screen and tap Login.
  2. If you are a new user, tap New Registration.
  3. Fill in the required information (fields marked with * are mandatory).
  4. Tap Register.
  5. Input the 12-digit Product Serial Number and 8-digit Activation Code from the password envelope. Tap Activate.
Login screen in Russian for the diagnostic tool.

Login screen for the diagnostic software, showing fields for email and password.

Note: The tablet has an auto-save function for login credentials. For updates, a VPN might be needed in some regions.

After successful registration, the tablet and VCI device will automatically establish wireless communication.

4. Vehicle Connections

  1. Turn off the vehicle ignition.
  2. Ensure the vehicle battery voltage is between 11-14 volts.
  3. Locate the DLC (Data Link Connector). It is usually found within 12 inches of the instrument panel, under or around the driver's side. For specific locations, refer to your vehicle's service manual.
Diagram showing common DLC locations in a car interior.

Common locations for the Data Link Connector (DLC) in various vehicle models.

  1. Connect one end of the diagnostic cable to the DB-15 diagnostic connector on the tablet, and the other end to the vehicle's DLC port.

5. Operation

5.1 Job Menu Overview

The main menu provides access to various diagnostic and service functions:

NameDescription
Intelligent DiagnoseObtain vehicle data from the cloud server via VIN reading for quick tests, avoiding manual menu selection. Check historical repair records online.
Local DiagnoseManually diagnose a vehicle.
Service FunctionOffers coding, reset, relearn, and other service functions to restore vehicle functionality after repair or replacement.
Remote DiagnoseFacilitates instant messaging and remote diagnosis for faster repairs.
TPMSConfigures the tool as a professional TPMS service tool (requires TSGUN device, sold separately) for activation, programming, and relearning.
Software UpdateUpdates vehicle diagnostic software and APK.
Diagnostic HistoryAccesses diagnostic reports from previously tested vehicles and resumes previous operations.
FeedbackProvides diagnostic logs for issue analysis.
ADASPerforms ADAS calibration operations (requires specific ADAS calibration tool, sold separately).
MallSubscribes to extra software or service functions not included in the diagnostic tool.
Vehicle CoverageViews all vehicle models covered by the tool.
MaintenanceProvides abundant maintenance data for efficient and accurate vehicle diagnosis and repair.
User InfoManages VCI, reports, password, Wi-Fi printer configuration, system settings, and logout.
Other ModulesIncludes add-on modules, product manual, FAQ, and Android system apps.

5.2 Intelligent Diagnose

This function automatically decodes the VIN (Vehicle Identification Number) of the connected vehicle. If successful, it retrieves vehicle information from the remote server and guides you to the vehicle information page, bypassing manual menu selection.

Note: Ensure the tablet is properly connected to the vehicle's DLC and has a stable network connection.

  1. Tap Intelligent Diagnose on the Job menu screen.
  2. After pairing, the tablet reads the vehicle VIN.
  3. If the VIN is found, the AutoDetect Result screen appears, showing vehicle information.
AutoDetect Result screen showing vehicle information like year, make, model, and VIN.

AutoDetect Result screen displaying decoded vehicle information.

  • Tap Diagnostic to start a new diagnostic session.
  • Tap Scan History to view historical repair records.

If the tablet fails to access VIN information, you can manually enter the VIN or use the VIN recognition module.

5.3 Local Diagnose

In this mode, you manually select vehicle information and follow on-screen instructions.

  1. Tap Local Diagnose to enter the vehicle selection page.
  2. Select the desired vehicle model (e.g., Ford).
  3. Turn the ignition key to ON.
  4. Confirm vehicle information.
  5. Select the desired test item (e.g., Health Report, System Scan, System Selection).
Screen showing various service functions like DPF Regeneration, Steering Angle Reset, Gear Learning, etc.

Overview of 32+ service functions available on the diagnostic tool.

5.3.1 Health Report (Quick Test)

This function quickly accesses all electronic control units (ECUs) and generates a detailed vehicle health report. Fault codes appear in red, while properly functioning systems are black.

Warning: Diagnostic Trouble Codes (DTCs) identify malfunctioning systems but should not be the sole basis for part replacement. Always follow testing procedures and flowcharts in the vehicle's service manual.

  • Enter: Accesses the diagnostic function selection screen.
  • Report: Saves the diagnostic result as a health report.
  • Compare Results: Compares pre-repair and post-repair reports to identify cleared and unfixed DTCs.
  • Clear DTCs: Erases existing diagnostic trouble codes.

Note: Clearing DTCs does not fix the underlying problem. If repairs are not made, codes will reappear.

5.3.2 Read Data Stream

This option allows viewing and recording real-time Live Data, providing insights into overall vehicle performance and guiding repairs.

Caution: If driving is required for troubleshooting, always have a second person operate the tool to avoid accidents.

  • Select Page/All: Selects data stream items.
  • OK: Confirms selection and proceeds to data stream reading.
  • Value: Default mode, displays parameters in text list format.
  • Graph: Displays parameters in waveform graphs.
  • Combine: Used for graph merge status for data comparison, marking different items in different colors (max 4 items simultaneously).
  • Min/Max: Defines maximum/minimum values for alarms.
  • Customize: Selects/deselects data stream items for waveform display.
  • Compare Sample: Imports saved sample data stream files for comparison.
  • Record: Starts recording diagnostic data.
  • Save Sample: Customizes and saves standard range of live data stream items as a DS sample file.

5.3.3 Actuation Test

This function accesses vehicle-specific subsystem and component tests. The tablet outputs commands to the ECU to drive actuators, determining system integrity by reading ECU data or monitoring actuator operation.

Diagram showing bi-directional control and ECU coding functions, including fuel pump test, injector buzz test, and VIN writing.

Bi-directional control and ECU coding capabilities of the diagnostic tool.

5.4 Service (Reset) Functions

The tool provides various service functions for coding, resetting, and relearning, helping vehicles return to functional status after repairs or replacements. Available tests vary by vehicle manufacturer, year, and model. Regular updates are recommended to access the latest functions.

  • Maintenance Light Reset (Oil Reset): Resets the oil service for the engine oil life system.
  • Electronic Parking Brake Reset (BRAKE RESET): Resets the brake pad after replacement.
  • Steering Angle Reset (SAS Reset): Resets the steering angle after replacing components or performing alignment.
  • ABS Bleeding: Performs bi-directional tests to check ABS operating conditions.
  • Crank Position Sensor Adaptive Learning (GEAR LEARN): Performs gear learning to turn off the Malfunction Indicator Light (MIL).
  • Anti-theft Matching (IMMO): Matches anti-theft keys after replacing related components.
  • Injector Coding (INJECTOR): Writes or rewrites injector codes in the ECU.
  • Battery Matching (BAT. RESET): Resets the vehicle battery monitoring unit.
  • DPF Regeneration (DPF REG.): Clears PM (Particulate Matter) from the DPF filter.
  • Throttle Matching (ELEC. THROTTLE RLRN): Makes initial settings to throttle actuators.
  • Gearbox Matching (GEARBOX): Completes gearbox self-learning to improve shifting quality.
  • Headlight Matching (AFS RESET): Initializes the adaptive headlamp system.
  • Sunroof Initialization (SUNROOF): Sets sunroof lock, rain-closing, and memory functions.
  • Suspension Level Calibration (SUS RESET): Adjusts body height.
  • EGR Adaption: Learns the EGR valve after cleaning or replacement.
  • Seats Calibration: Matches seats with memory function after replacement or repair.
  • Tyre Reset: Sets size parameters for modified or replaced tires.
  • Coolant Bleed: Activates the electronic water pump before venting the cooling system.
  • AdBlue Reset: Resets urea system after diesel exhaust treatment fluid replacement.
  • NOx Sensor Reset: Resets NOx sensor values after re-initialization or catalytic converter replacement.
  • AC System Relearn/Initialization: Performed when AC ECU or actuator is replaced or memory is lost.
  • High Voltage Battery Detection (HIGH VOLTAGE BATTERY): Used for high voltage battery diagnosis and status information.
  • Windows Calibration: Recovers ECU initial memory for power windows.
  • Language Change: Changes the system language of the vehicle center console.
  • A/F Reset: Sets or learns air/fuel rate parameters.
  • Transport Mode: Deactivates transport mode to restore normal vehicle functions.
  • Stop/Start Reset: Opens or closes the automatic Start/Stop function via ECU settings.
  • Intelligent Cruise Control System Reset: Matches the intelligent cruise control module after replacement or repair.
  • Engine Power Balance Monitoring: Monitors crankshaft acceleration to determine relative power per cylinder.
  • Gas Particulate Filter (GPF) Regeneration: Performs GPF replacement or regeneration.
  • Motor Angle Calibration: Performs motor angle calibration when rotor position sensor readings differ from the actual rotor field position.

5.5 Remote Diagnose

This module allows repair shops or mechanics to diagnose a remote vehicle and communicate instantly, improving efficiency.

5.5.1 Device-To-Device Remote Diagnosis

The tool can initiate remote diagnosis with other compatible diagnostic tools.

  1. Tap Remote Diagnostic on the function option selection screen.
  2. Select REQUEST CONTROL REMOTE DEVICE to request control of a partner's device.
  3. Wait for the partner's confirmation, then start diagnosis.
  4. Generate a diagnostic report.

To invite a technician to perform remote control on your tool:

  1. Select INVITE REMOTE DIAGNOSE ASSISTANT.
  2. Choose the desired diagnostic software.
  3. Wait for the partner's confirmation, then start diagnosis.
  4. Generate a diagnostic report.

5.5.2 Device-To-PC Remote Diagnosis

Users can also request remote control from a PC client technician.

  1. Slide the switch to ON on the Remote Diagnose screen.
  2. Notify the partner of the PC client website: http://remote.x431.com.
  3. The partner inputs their official technician account and password, then logs in.
  4. The partner enters the Serial Number of your handset and taps Start remote diagnosis.

Note: During remote diagnosis, avoid executing actions on your device. The partner cannot save diagnostic reports or records on your tablet. A remote diagnostic report will be automatically generated upon session completion.

6. Maintenance

6.1 Software Update

This module allows you to update the diagnostic software, application, and frequently used software.

  1. Go to Software Update on the Job Menu and tap the Downloaded tab.
  2. The Available tab lists software that can be updated, categorized as:
    • Common software: Essential apps, always at the top of the list.
    • Frequently used vehicle software: Diagnostic and Reset software.
    • Other vehicle software: Rarely used software.
  3. Check the box next to the desired software and tap Update to start downloading.
  4. Once downloaded, the software packages will install automatically.

Note: The first update can take approximately 4 hours. Ensure a stable network connection.

6.2 Renew Subscription

If your software subscription is due or expires, the system will prompt you to renew it.

  1. Tap Renewal on the bottom of the screen.
  2. Select Subscription Renewal Card.
  3. Input the 24-digit pin code from your Subscription Renewal Card and tap Submit.
  4. Go to the update center to update the diagnostic software.

6.3 Clear Cache

This option clears the application cache. Clearing the cache will restart the application.

6.4 Diagnostic Software Clear

This item allows you to hide or clear diagnostic software that is not frequently used.

Note: Removing software may completely delete it from the tablet. Use this feature to free up space if software is not used.

7. Troubleshooting (FAQ)

7.1 How to save power?

  • Turn off the screen when the tool is idle.
  • Set a shorter standby time.
  • Decrease the brightness of the screen.
  • Turn off WLAN if not required.
  • Disable GPS function if not in use.

7.2 Communication error with vehicle ECU?

Confirm the following:

  • Is the diagnostic connector correctly connected?
  • Is the ignition switch ON?
  • If all checks are normal, send vehicle year, make, model, and VIN using the Feedback feature.

7.3 Failed to enter into vehicle ECU system?

Confirm the following:

  • Is the vehicle equipped with this system?
  • Is the VCI dongle correctly connected?
  • Is the ignition switch ON?
  • If all checks are normal, send vehicle year, make, model, and VIN using the Feedback feature.

7.4 How to download the diagnostic App after resetting the tablet?

Note: Ensure the network is properly connected before registration.

  1. Launch the browser; the official Launch website should open. If not, type www.x431.com.
  2. Tap Login, input your username and password, then tap Log In.
  3. Confirm the serial number is correct, tap APP application program, and then the Download icon.
  4. After download, follow on-screen instructions to install.
  5. After installation, use your existing username and password to log in and go to the update center to download diagnostic software.

7.5 What to do if the language of vehicle diagnostic software does not match the system language?

English is the default system language. After setting your preferred system language, go to the update center to download the corresponding vehicle diagnostic software. If the software still displays in English, it indicates that the software for your chosen language is under development.

7.6 How to retrieve the login password?

  1. Launch the application from the home screen.
  2. Tap Login on the upper right corner of the screen.
  3. Tap Retrieve password.

8. Specifications

8.1 Technical Parameters

  • Operating System: Android 10.0
  • CPU: 2.0GHz Quad-core
  • Memory: 4GB RAM
  • Storage: 64GB ROM
  • Screen: 8-inch capacitive touch screen with 1280x800 resolution
  • Camera: Rear 8 megapixels
  • Connectivity: Type-A USB port x 1, Type-C USB port x 1, Bluetooth, Wi-Fi (2.4 & 5.0GHz Dual-Frequency)
  • Battery: 3.7V/6000mAh
  • Voltage: 5V 2A (10W)
  • Working Temperature: 0°C ~ 50°C
  • Storage Temperature: -20°C ~ 70°C
  • Item Weight: 4kg
  • External Testing Certification: FCC
  • Origin: Mainland China

8.2 Key Features and Capabilities

  • Communication Interface: OBD-II
  • Software Update: Yes (2 Years Free Update)
  • Hardware Version: 2025 Version
  • Software Version: 2025 Version
  • Special Features: Bluetooth, Wifi
  • CAN FD and DOIP: Support
  • ECUAID: Support
  • Guiding Function: For Volkswagen and Audi
  • SGW: Requires FCA account purchase
  • System Diagnosis: All systems of the car
  • Reset Service: 31+ Reset functions
  • ECU Coding: Support
  • Active test, Bi-Directional Control: Support
  • Auto VIN Scan: Support
  • Diagnostic Report / Feedback: Support
  • Free Use: Lifetime Free use, 2 Years Free Update
  • Warranty: 5 Years

Please Note: Does not support diagnosing 24V trucks, which can easily burn out equipment.

9. User Tips

  • Initial Setup: When activating the scanner, set the tablet's language to your preferred language (e.g., Russian) before activation. Using a new email address for registration is recommended if you plan to sell the device later.
  • Updates: The first major update can take around 4 hours. Ensure a stable internet connection. A VPN might be necessary for updates in some regions.
  • Functionality: The device is highly capable for professional use, offering extensive diagnostic functions, ECU coding, and bi-directional testing. Review the specific functionalities online before purchase to ensure it meets your needs.
  • Vehicle Coverage: The tool covers a wide range of global vehicles from 1996-2023 models, including CAN FD/DOIP protocols and FCA AutoAuth. It works well with various European, Chinese, and Brazilian brands.
  • Post-Update Period: The device remains functional after the 2-year free update period ends; it does not get locked. However, further updates may require payment.
  • Physical Durability: The device comes in a durable, shock-resistant case, which is highly appreciated by users for protecting the equipment.
  • Screen Readability: The large 8-inch screen is easy to read even in bright sunlight, and the interface is intuitive.
  • Connectivity: The device connects to vehicles via the included OBD cable. While it has Wi-Fi for updates and reports, the primary vehicle connection is wired.
  • Customer Support: The seller is noted for being responsive and helpful with activation and detailed explanations.

10. Warranty and Support

10.1 Warranty

LAUNCH® products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty is limited to persons who purchase LAUNCH® products for purposes of resale or use in the ordinary course of business.

This warranty does not cover any part that has been abused, altered, used for a purpose other than its intended use, or used inconsistently with instructions. The exclusive remedy for any defective automotive meter is repair or replacement. LAUNCH shall not be liable for any consequential or incidental damages.

Final determination of defects will be made by LAUNCH according to stipulated procedures.

10.2 Customer Service

If you have any questions regarding the operation of the unit, please contact your dealer or customer service center:

  • Tel: 86-755-25938674
  • E-mail: DOD@cnlaunch.com

LAUNCH reserves the right to make changes to product designs and specifications without notice. The actual product may differ slightly from descriptions in the manual regarding physical appearance, color, and configuration. While efforts are made to ensure accuracy, if you have any questions, please contact your local dealer or after-sale service center. LAUNCH does not bear responsibility for misunderstandings arising from this document.

A user manual in PDF format is available for download. You can view it at https://manuals.plus/m/58a71e4faf607ae5e04796c94191ab5e01cbb983543a7967f73d87ed3d597b56.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.