XZT Motorcycle LED Light

Contents

User Manual: XZT Super Bright Driving Light Eagle Eye LED

Motorcycle Fog Lamp Headlight Daytime Running Light

1. Product Information

This manual provides essential information for the safe and effective use of your XZT Super Bright Driving Lights. These LED lights are designed for various applications including motorcycles, electric motors, bikes, and other car vehicles, serving as driving lights, fog lamps, headlights, or daytime running lights.

  • Product Name: Motorcycle signal lights
  • Model Name: Motorcycle LED Light
  • Batch/Serial Number: [20240821]

2. Safety & Warnings

Important Safety Information

  • Keep the device and accessories cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • WARNING: To avoid the danger of suffocation, keep this plastic bag away from babies and children. Do not use this bag in cribs, beds, carriages, or playpens. This bag is not a toy.
  • Warning: Avoid water. Do not disassemble by non-professionals.

3. Setup and Installation

The XZT Super Bright Driving Lights are designed for DIY installation on most motorcycles, electric motors, bikes, and car vehicles. While not overly complex, basic electrical knowledge is recommended for proper wiring.

General Installation Steps:

  1. Choose Mounting Location: Select a suitable location on your vehicle for the lights, ensuring they do not obstruct other components or vision. The lights come with integrated mounting brackets.
  2. Secure the Lights: Use appropriate fasteners (not included) to securely attach the lights to your chosen location.
  3. Wiring: Connect the light's wires to your vehicle's 12V electrical system. Typically, one wire is positive (+) and the other is negative (-). Ensure correct polarity to prevent damage. It is recommended to connect through a fuse and a switch for safety and control.
  4. Test Functionality: Before finalizing the installation, test the lights to ensure they function correctly.
Pair of XZT LED lights with exposed wiring
Image: Pair of XZT LED lights showing the wiring for connection.
Rear view of XZT LED lights showing mounting brackets and wiring
Image: Rear view of the LED lights, highlighting the mounting brackets and wire entry points.

4. Operating Instructions

Once properly installed and wired, the XZT Super Bright Driving Lights will operate in conjunction with the electrical circuit they are connected to. They are designed to provide bright illumination for various purposes.

Basic Operation:

  • Turn on the switch or activate the vehicle's lighting system to which the lights are connected.
  • The LED lights will illuminate, providing a super bright beam.
  • Turn off the switch or vehicle's lighting system to deactivate the lights.
Single XZT LED light emitting a bright white beam
Image: A single XZT LED light demonstrating its bright, focused beam.
Pair of XZT LED lights with various color outputs
Image: A pair of XZT LED lights showcasing their ability to produce different color outputs.

5. Maintenance

To ensure the longevity and optimal performance of your XZT LED Driving Lights, follow these simple maintenance guidelines:

  • Cleaning: Gently wipe the lens and housing with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners or solvents that could damage the lens or finish.
  • Inspection: Periodically check the wiring for any signs of wear, fraying, or loose connections. Ensure the mounting brackets are secure.
  • Water Exposure: While designed for outdoor use, avoid prolonged submersion or direct high-pressure water jets, as the product is not designed to be fully waterproof.

6. Troubleshooting

If you encounter issues with your XZT LED Driving Lights, consider the following troubleshooting steps:

  • Lights Not Turning On:
    • Check the power connection to ensure it is secure and correctly wired to a 12V source.
    • Verify that the fuse in the circuit (if installed) is not blown.
    • Ensure the switch (if installed) is in the 'ON' position and functioning correctly.
    • Check for any loose or corroded wiring connections.
  • Dim or Flickering Lights:
    • Inspect wiring for poor connections or damage.
    • Ensure the vehicle's battery is providing sufficient voltage (12V).

If problems persist after troubleshooting, please contact customer service for assistance.

7. Specifications

Feature Specification
Product Type 5630 3SMD LED with lens
Voltage 12V
Power 0.06A
Lumen Output 120 LM/pc
LED Chip Type 5630 chip
Dimensions (Light Unit) 5cm (1.97in) x 2.5cm (0.98in) x 2.5cm (0.98in)
Line Size (Wire Length) 60cm (23.62in)
Material LED
Origin Mainland China
Close-up of the XZT LED lights showing the lens and LED chips
Image: Detailed view of the XZT LED light's lens and internal LED chips.

8. Compliance Information

This product complies with relevant regulatory standards:

CE, UKCA, FC, RoHS compliance symbols

CE, UKCA, FC, and RoHS compliant.

9. User Tips

  • The lights feature an

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.