1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your SIMICAM 4K PoE Video Surveillance Camera. Please read this manual thoroughly before using the product to ensure proper setup and functionality. This camera is designed for both indoor and outdoor use, offering high-definition surveillance with various power and connectivity options.
2. Safety Information
- Ensure the power supply matches the camera's requirements (48V PoE or 12V DC).
- Do not expose the camera to extreme temperatures or humidity outside its operating range.
- Avoid direct exposure of the lens to strong light sources for extended periods.
- Handle the camera with care to prevent physical damage.
- Installation should be performed by qualified personnel if you are unsure about electrical wiring.
3. Package Contents
Please check the package for the following items:
- SIMICAM 4K PoE Video Surveillance Camera
- Mounting accessories (screws, wall plugs)
- User Manual (PDF version available at PDF Link)
Note: Power adapter and Ethernet cables are typically sold separately unless specified in your purchase.
Image: SIMICAM camera and cables as packaged in the box.
4. Setup and Installation
4.1. Connecting the Camera to Your System
The SIMICAM camera supports both Power over Ethernet (PoE) and standard DC 12V power supply.
4.1.1. Working With PoE NVR
If you are using a PoE Network Video Recorder (NVR), connect the camera directly to a PoE port on the NVR using an Ethernet cable. The NVR will provide both power and data connectivity.
Diagram: Connecting the camera to a PoE NVR, which then connects to a monitor and network.
4.1.2. Working With PoE Switch
Alternatively, you can use a PoE switch or PoE injector to power the camera and connect it to your network. The PoE switch/injector connects to your router, and the camera connects to the PoE switch/injector. The NVR (if used) would also connect to the same network.
Diagram: Connecting the camera via a PoE switch to a router, allowing access from a PC or phone.
4.1.3. DC 12V Power Supply
If not using PoE, the camera can be powered by a 12V DC power adapter (not included). Connect the power adapter to the camera's DC input and an Ethernet cable to the RJ45 port for network connectivity to your router.
4.2. Modifying the Camera's IP Address
By default, the camera is set to DHCP (Dynamic Host Configuration Protocol) with a default username of admin and password of 123456. It is recommended to use the IPCBatch Tool for IP address management.
IPCBatch Tool Download: https://www.vatilon.com/xflrjxz
VMS Download: https://download.xm030.cn/d/MDAwMDE2MTI=
- Discover Camera: Use the IPCBatch Tool to search for the camera's IP address on your network.
- Set Fixed IP: You can assign a fixed IP address to the camera. Ensure this IP address does not conflict with other devices on your LAN.
- Network Segment Consistency: The IP network segment of the camera must be consistent with the network segment of your NVR, computer, and LAN. For example, if your camera's IP is 192.168.1.10, the network segment is "1", and all other devices (NVR, computer, LAN) should also be in the "1" segment (e.g., 192.168.1.x).
- Modify IP: Use the IPCBatch Tool to modify the camera's IP address as needed.
Screenshot: IPCBatch Tool interface showing IP address settings and the importance of network segment consistency.
4.3. Browser Access and Camera Settings
For initial access and detailed configuration, it is recommended to use Internet Explorer (IE) browser on Windows. You may need to install a browser plug-in for the first visit.
- Open Internet Explorer and enter the camera's IP address in the address bar (e.g.,
http://192.168.0.100). - Log in using the default username
adminand password123456. - Ensure "Full Netcom" and "IP Adaptive" functions are enabled in the camera settings. If your NVR cannot find the camera, these settings might be disabled and need to be re-enabled.
Screenshot: Browser interface for camera login, showing fields for username and password.
4.4. Phone App Setup (Watilon)
For remote monitoring via smartphone, download the Watilon app:
- iPhone: Search "Watilon" in the Apple App Store.
- Android: Scan the QR code below to download and install the Watilon app.
Image: QR code for downloading the Watilon app on Android devices.
- Connect the camera to your LAN switch.
- On your phone, turn off mobile data, enable Wi-Fi, and connect to the same local area network as the camera.
- Register a user account and set a password within the Watilon app.
- Add the camera equipment to the app. You can do this by scanning the camera's QR code (found in the camera's version information via IPCBatch Tool or browser access) or by manually entering its details.
Screenshot: Watilon app interface showing steps to add a new device, including scanning a QR code.
5. Operating Instructions
5.1. Night Vision Modes
The camera offers different night vision modes to suit various surveillance needs:
- Infrared Light: Provides black and white video in low light conditions.
- White Light: Provides full-color video at night.
- Dual Light: Combines infrared and white light. Infrared is active in darkness (black and white video), and white light activates when motion is detected, switching to full-color video.
You can select your preferred night work mode through the camera's settings via the IPCBatch Tool or browser interface.
Screenshot: IPCBatch Tool showing options for night work mode: DualLight, InfraredLight, and WhiteLight.
5.2. Motion Detection and Email Alerts
Configure motion detection settings to receive alerts when activity is detected:
- Access the camera settings via browser or IPCBatch Tool.
- Navigate to the Motion Detect section.
- Enable "Send Email" in the motion detection or human detection settings.
- To receive email alerts, you must configure your email's SMTP service, obtain a third-party login authorization code, and potentially reduce your email's security level to prevent alerts from being blocked as spam.
Image: Visual representation of motion detection triggering email alerts.
5.3. Audio Recording
The camera features a built-in microphone to record audio, providing authentic sound with video recordings.
Image: Depiction of the camera's audio recording capability in a meeting setting.
5.4. Remote Viewing and ONVIF Compatibility
The camera supports P2P Cloud remote viewing via smartphone apps (Watilon, Xmeye) and PC software. It is ONVIF 2.0-2.4 compatible, allowing easy integration with third-party NVRs and video surveillance systems like Dahua and HIKVISION.
Image: Illustrates ONVIF compatibility with various NVR brands.
Image: Steps for P2P Cloud remote viewing on smartphones (Android, iOS) and PC.
5.5. Video Demonstration
Video: A demonstration of the camera's surveillance capabilities in an outdoor setting.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the camera lens and body. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the camera.
- Firmware Updates: Regularly check the manufacturer's website or app for firmware updates to ensure optimal performance and security.
- Cable Inspection: Periodically inspect all cables for wear, damage, or loose connections, especially for outdoor installations.
- Environmental Protection: While the camera is waterproof/weatherproof (IP66), consider additional shelter for prolonged exposure to harsh weather conditions to extend its lifespan, especially given its plastic housing.
7. Troubleshooting
7.1. Camera Not Found / IP Conflict
- Ensure the camera's IP network segment matches your NVR/PC/LAN.
- Use the IPCBatch Tool to scan for the camera and modify its IP if necessary.
- If directly connecting to a PC, try using a crossover Ethernet cable.
- Verify that "Full Netcom" and "IP Adaptive" are enabled in the camera's settings.
7.2. NVR Compatibility Issues
- The camera is ONVIF 2.0-2.4 compatible. Ensure your NVR also supports ONVIF.
- Some NVRs or recording software (e.g., BlueIris) may require the video compression format to be changed from H.265 (default) to H.264. Check your NVR's specifications and adjust the camera settings accordingly.
7.3. No Video Preview in Browser
- Ensure you are using Internet Explorer and have installed any required browser plugins prompted by the camera's web interface.
- Check your browser's security settings to allow plugins to run.
7.4. App Connection Problems
- Verify your phone is connected to the same local Wi-Fi network as the camera during initial setup.
- Ensure mobile data is turned off during initial app setup to prevent connection issues.
- Confirm the camera's IP network segment is consistent with your phone's network.
- If using the Watilon app, ensure you have registered an account and added the camera correctly.
7.5. Password Reset
If you forget the camera's password, you can perform a factory reset by long-pressing the reset button on the camera. Be aware that this will revert all settings to default, including the IP address (back to DHCP) and password (123456).
7.6. RTSP Not Working Reliably
Some users have reported unreliable RTSP streaming. Ensure your network configuration is stable and check for any firmware updates that might address this issue. Verify the correct RTSP port and URL format for your specific setup.
7.7. No Wi-Fi Connectivity
This camera is a wired IP camera and does not support Wi-Fi connectivity. It requires an Ethernet cable for network connection.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | SIMICAM |
| Style | Bullet Camera |
| High Definition | 8.0 Megapixels (also available in 4MP/5MP) |
| Lens (mm) | 2.8mm, 3.6mm, 6mm, 8mm |
| Connectivity | RJ45 (Wired Ethernet) |
| Power Supply | With PoE (48V) / DC 12V |
| Video Compression Format | H.265 |
| IR Distance (m) | About 10-30M |
| Minimum Illumination (Lux) | 0.01lux |
| Viewing Angle | 90° |
| Special Features | Waterproof / Weatherproof (IP66), Audio Record |
| Installation | Ceiling, Normal, Wall Mounted, Pendant Mount, Vertical Pole Mount |
| Shell Material | Plastic |
| Dimensions (L x W x D)(mm) | 12 x 8 x 8 |
| Package Weight | 0.286 kg |
| Certification | CE |
9. User Tips
- Direct PC Connection: If you need to adjust settings directly from a PC, a crossover Ethernet cable can be useful for establishing a direct connection.
- NVR/Software Compatibility: Be aware that some NVRs or third-party software (like BlueIris) might require changing the camera's default H.265 video compression format to H.264 for proper recognition and recording.
- Outdoor Use: While rated IP66, the camera has a plastic housing. For long-term outdoor durability, consider installing it in a sheltered location to protect it from extreme weather.
- Image Quality: Users report excellent image quality, both during the day and with night vision. Experiment with different lens options (e.g., 2.8mm for wider view, 8mm for narrower/further view) to suit your specific surveillance needs.
10. Warranty and Support
For technical support, please contact: 453836824@qq.com
This manual may contain some incorrect information, even though it was published with careful proofreading. New updates will be added in the next release without notice. Your valuable advice is really appreciated.
For information regarding returns or other service-related inquiries, please refer to the seller's policies or contact customer service.