Dfiolk FLXDL1100

Contents

Nordic Minimalist Modern Designer LED Wall Lamp

Model: FLXDL1100 | Brand: Dfiolk

Introduction

Thank you for purchasing the Dfiolk Nordic Minimalist Modern Designer LED Wall Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Product Information

  • Product Name: LED wall light
  • Model: FLXDL1100
  • Batch/Serial Number: BD-66

Manufacturer & EU Representative

DetailInformation
ManufacturerShenzhen Qiheng Power Supply Co., Ltd
Manufacturer Addressuangdongsheng shenzhenshi baoan xiqujieweiyuanhuixinandiergongye12haolou
Manufacturer Tel+86 15018027687
EU Authorized RepresentativeSophie Dupont
EU Representative Addressbis rue Abel 75012 Paris, France
EU Representative Tel+34910606259
EU Representative E-mailSophieDupont@proconseilfr.cc

Important Safety Warnings

  • WARNING: Please test the lamp before installation and install only if safety is guaranteed.
  • Always ensure the power supply is OFF before installation, cleaning, or any maintenance.
  • Connect the lamp only to 110V/220V voltage. Do NOT use 380V voltage.
  • Do not use corrosive liquids to clean the lamp.
  • This product is designed for indoor use in home settings (e.g., Foyer, Bedroom, Aisle, Corridor, Bedside). It is not rated for outdoor use or exposure to water.
  • Installation should be performed by a qualified electrician if you are unsure.

Package Contents

Please check that all components are present and undamaged:

  • LED Wall Lamp Fixture (with integrated LED strip and silicone lamp shade)
  • Fixed Hanging Plate
  • Wood Screws
  • Power Driver (integrated or separate, depending on model variant)

Note: The exact number of screws and specific power driver configuration may vary slightly.

Specifications

FeatureDetail
Brand NameDfiolk
Model NumberFLXDL1100
Item TypeWall Lamps
MaterialAluminum (lamp body), Stainless Steel (lamp body), Acrylic (lampshade)
ColorBlack
Light SourceLED bulbs (Included)
Wattage Options60CM (0-5W), 80CM (6-10W), 100CM (11-15W), 120CM (16-20W), 150CM (21-30W), 200CM (31-40W)
Color Temperature Options3 Color Dimming, Warm White (2700-3500K), Cold White (5500-7000K), Pure White (>7000K)
Luminous Flux249-2000 Lumens (depending on wattage/length)
Voltage90 - 260 V AC
Power SourceAC
Installation TypeWall Mounted, Self-contained
Lighting Area5-10 square meters
ApplicationFoyer, Daily Lighting
StyleContemporary
TechnicsEngraving
Shade DirectionUp & Down
Base TypeWedge
Is DimmableNo (brightness dimming), but offers multiple color temperatures.
Switch TypeKnob switch (for on/off and potentially cycling color temperatures)
Color Rendering Index≥90Ra
Package Weight0.01 kg
Package Dimensions3cm x 3cm x 3cm (approximate)
CertificationsCCC, CE, CQC, EMC, FCC, GS, LVD, PSE, ROHS, SAA, UL, VDE, EAC
Diagram showing the dimensions of the wall lamp, including lengths of 60cm, 80cm, 100cm, 120cm, 150cm, and 200cm, with a base of 60mm width, 65mm depth, and 25mm height.
Figure 1: Wall Lamp Dimensions (various lengths available)
Diagram illustrating the beam angle of the wall lamp, showing light projecting upwards and downwards from the fixture.
Figure 2: Optical Beam Angle
Comparison image showing a decorative item illuminated by 4000K light on the left and 3000K light on the right, demonstrating different color temperatures.
Figure 3: Color Temperature Comparison (4000K vs 3000K)

Installation Guide

Before you begin: Ensure the power supply to the installation area is turned OFF at the circuit breaker to prevent electric shock. It is recommended to have a qualified electrician perform the installation.

  1. Prepare the Installation Area: Choose a suitable wall location. Ensure the wall can support the weight of the fixture and that there is access to electrical wiring.
  2. Mount the Fixed Hanging Plate:
    Exploded view diagram showing the components of the wall lamp: Fixed hanging plate, wood screw, LED strip, and high light transmittance environmental protection silicone lamp shade.
    Figure 4: Lamp Components and Installation Overview
    Position the fixed hanging plate on the wall where you intend to install the lamp. Mark the drilling points. Drill holes and secure the hanging plate to the wall using the provided wood screws or appropriate wall anchors for your wall type.
  3. Electrical Connection: Connect the household electrical wires to the lamp's power driver wires. Ensure correct polarity (Live to Live, Neutral to Neutral, Ground to Ground, if applicable). Use appropriate wire connectors and ensure all connections are secure and insulated. This lamp operates on 110V-220V AC.
  4. Attach the Lamp Fixture: Carefully align the lamp fixture with the fixed hanging plate. Secure the lamp fixture to the hanging plate using the screws provided. Ensure the fixture is firmly attached and stable.
  5. Test the Lamp: Once installation is complete, restore power at the circuit breaker. Turn on the lamp using the wall switch to ensure it functions correctly.

Kind tips:

  • Please turn on the light before installation to check whether it is working properly.
  • Please connect the lamp to 110V/220V voltage, do not use 380V voltage.

Operation

This LED wall lamp is designed for simple operation.

  • Power On/Off: Use the standard wall switch (knob switch) connected to the lamp's circuit to turn the light on or off.
  • Color Temperature Selection (if applicable): For models with "3 Color Dimming" functionality, the knob switch may also cycle through different color temperatures (e.g., Warm White, Cold White, Pure White) with successive presses or turns. Refer to your specific model's functionality.
Video 1: Product demonstration showing the lamp's illumination and aesthetic in various settings.

Maintenance

To ensure the longevity and optimal performance of your LED wall lamp, follow these maintenance guidelines:

  • Cleaning: Always turn off the power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the lamp body and shade. Do NOT use corrosive liquids, abrasive cleaners, or harsh chemicals, as these can damage the finish and materials.
  • Bulb Replacement: The LED bulbs are integrated into the fixture and are not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced.
  • General Care: Periodically check the lamp for any loose connections or damage. If any issues are found, disconnect power and consult a qualified technician.

Kind tips:

  • Adjust the lamp balance or clean the lamp with the power off.

Troubleshooting

If you encounter issues with your LED wall lamp, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Lamp does not turn onNo power supply; Loose wiring; Faulty switch; Damaged LED driver.Check circuit breaker. Ensure all wiring connections are secure. Test the switch. If issues persist, consult a qualified electrician.
Light flickers or is dimUnstable power supply; Loose wiring; Incompatible dimmer (if used, though this model is not brightness dimmable); Faulty LED driver.Check power supply stability. Verify wiring connections. Ensure no dimmer is used for brightness control. Consult an electrician if problem continues.
Incorrect color temperatureIncorrect setting for "3 Color Dimming" models.Cycle the knob switch to select the desired color temperature.
Lamp body is hotNormal operation for LEDs (slight warmth); Overheating due to poor ventilation or faulty components.A slight warmth is normal. If it's excessively hot, turn off power immediately and consult an electrician. Ensure proper air circulation around the fixture.

User Tips

  • This lamp is designed for indoor use only. It is not waterproof and should not be installed outdoors or in areas exposed to moisture.
  • The lamp is hardwired and requires connection to your home's electrical system (110V-220V AC); it does not operate on batteries.

Warranty & Support

This product comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, warranty claims, or any questions regarding your product, please contact the manufacturer or EU authorized representative:

  • Manufacturer Tel: +86 15018027687
  • EU Representative E-mail: SophieDupont@proconseilfr.cc

Certifications

This product complies with various international standards and holds the following certifications:

  • CCC
  • CE
  • CQC
  • EMC
  • FCC
  • GS
  • LVD
  • PSE
  • ROHS
  • SAA
  • UL
  • VDE
  • EAC

CE Mark

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.