Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Hippcron Car Lock Door Remote Control Keyless Entry System. This universal 12V system is designed to add convenience and security to your vehicle by providing remote central locking functionality.

Image: Complete Hippcron Keyless Entry System Kit including control unit, remote key fobs, door lock actuators, and wiring.
Safety Information and Important Tips
- Professional Installation: It is highly recommended to have this product installed by a professional automotive electrician technician.
- Wiring Harness: Ensure the wiring harness avoids high temperature and high voltage positions within the vehicle.
- Connections: All connection points must be bandaged firmly with insulation tape to prevent short circuits and ensure durability.
- Host Unit Placement: Install the main control unit in a location free from moisture leakage and dust to prevent water entry.
- Antenna: Straighten the host antenna and ensure it avoids metal parts to maximize remote control receiving distance.
- Secure Installation: Install the host unit firmly. Ensure the wiring harness has sufficient length and is not pulled too tight to prevent loosening due to car vibrations.
- Environmental Conditions: Do not expose the main controller or remote controls to water, excessive wetness, or direct sunlight at high temperatures.
Package Contents
Please verify that all components are present in your package:
- 1 x Main Control Unit (Host)
- 2 x Remote Control Key Fobs
- 4 x Door Lock Actuators (5-wire type)
- 1 x Wiring Harness
- Mounting Hardware (screws, metal plates, connecting rods)

Image: All components of the Hippcron Keyless Entry System Kit laid out.
Specifications
| Feature | Host Unit | Remote Control |
|---|---|---|
| Working Voltage | 12/24V (±5V) | 6/12V |
| Static Current | <10mA | <1uA |
| Operating Frequency | 433.92MHz | 433.92MHz |
| Receiving Sensitivity | -108dBm | N/A |
| Transmission Power | N/A | 10dBm |
| Working Temperature | -20°C ~ +70°C | N/A |
| Moving Distance (Actuator) | N/A | 18MM±1MM |
| Movement Force (Actuator) | N/A | 32N±4N |
| Accessory Type | Alarm Key Mold | |
| Remote Control Type | Without LCD Remote Control | |
| Feature | Remote Central Lock | |
| Type | Anti-Theft Device One-Way | |
Setup and Installation
Before beginning installation, thoroughly understand the structure of your vehicle's doors to ensure proper placement of components and avoid interference with window operation. After installing each lock, test the window's movement to confirm no scratching occurs before reattaching the door panel.
Wiring Diagram

Image: Detailed wiring diagram for connecting the central control unit to the door lock actuators, horn, and warning lights. Includes two configurations (XY-Q111-A and XY-Q111-B) and special tips for installation.
Installation Examples
- **Front Driver/Passenger Side Door:**
Remove the door panel. Position the lock actuator and its metal mounting piece onto the metal board inside the door, securing it firmly. Insert the connecting rod into the appropriate hole on the actuator (refer to Picture 1 and Picture 2 for visual guidance) and connect it straight down to the existing door lock mechanism. Test the movement to ensure it operates smoothly with other locks. - **Rear Driver/Passenger Side Door:**
Remove the door panel. Place the lock actuator and its metal mounting piece onto the metal board, stabilizing it. Secure it using the bottom left stabilizing hole on the door panel (refer to Picture 3). Insert the connecting rod into the correct hole on the actuator, pull it down and extend it, then find a secure spot to connect it to the door lock mechanism (refer to Picture 4).




Product Overview Video
Video: A brief overview of the product components and their general function.
Operating Instructions
Basic Functions
- **Lock:** Press the lock button on the remote control key fob. The central control door will lock.
- **Unlock:** Press the unlock button on the remote control key fob. The central control door will unlock.

Image: Close-up of the remote control key fob with lock, unlock, and trunk release buttons.
Other Characteristics
- Direction lights will flash (JC-203 Support): Pressing the unlock key will cause direction lights to blink twice. Pressing the keylock will cause direction lights to blink once.
- Manual control switch lock (JC-201 support).
- Manual control of the main driver's door will link with other locks.
Remote Control Learning Method (Pairing)
- Press the host unit's "learning key" for approximately 1 second. The LED light on the host unit will illuminate, indicating that the remote control matching memory has been cleared.
- Immediately press any button on the first remote control key fob. If the host unit performs a lock action, the remote control has been successfully matched.
- Repeat step 2 for any additional remote controls you wish to pair. The host unit can match up to four remote controls.
- The host unit will automatically save the remote control code and exit the learning state after 15 seconds of inactivity.
User Tips
- **Existing Central Locking:** If your car already has central locking but lacks remote functionality, installing this module can be very straightforward.
- **Cable Length:** Be aware that the provided cables for the front doors might be slightly short in some vehicle models, potentially requiring minor modifications or extensions.
- **Trunk Actuator:** Note that the trunk actuator included in some kits is designed for electronic locks, not mechanical ones.
- **Remote Control Batteries:** The remote controls typically use CR2016 batteries (some users report CR2015). Ensure you have these on hand as they may not be included.
Troubleshooting
Remote Control Not Working / Not Pairing
- **Check Batteries:** Ensure the remote control key fobs have fresh, correctly installed CR2016 (or CR2015) batteries. A dim indicator light or reduced range often indicates low battery.
- **Re-pair Remote:** Follow the "Remote Control Learning Method" steps carefully to re-pair your remote controls with the main control unit.
- **Antenna Position:** Verify that the host unit's antenna is straightened and not obstructed by metal parts, which can affect signal reception.
- **Environmental Factors:** Ensure the main control unit and remotes are not exposed to water, excessive moisture, or extreme temperatures.
Actuators Not Responding (Manual Operation Works)
- **Wiring Check:** Double-check all wiring connections according to the provided wiring diagram. Ensure all connections are secure and properly insulated.
- **Power Supply:** Confirm that the main control unit is receiving proper 12V power and ground connections.
- **Host Unit Functionality:** If manual locking/unlocking works but remote control does not, the issue likely lies with the remote controls themselves or their pairing with the host unit.
Maintenance
- **Battery Replacement:** If the remote control's operating range decreases or the indicator light becomes dim, replace the batteries (CR2016 or CR2015).
- **Keep Dry:** Protect the main control unit and remote controls from water and moisture.
- **Cleanliness:** Keep the components clean and free from dust and debris.
- **Professional Inspection:** If you experience persistent issues, consult a professional automotive electrician.
Warranty and Support
This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects.
For further detailed instructions, wiring diagrams, or troubleshooting, you may refer to the official user manual available in PDF format: View User Manual (PDF).