MatSee Plus PJ-1203

Contents

MatSee Plus Tuya Smart Life ZigBee Energy Meter 80A User Manual

Model: PJ-1203

1. Introduction

The MatSee Plus Tuya Smart Life ZigBee Energy Meter 80A is designed to monitor electricity consumption in real-time. This device, combined with a current sensor clamp, provides accurate readings of voltage, current, power, and total kilowatt-hours (KWh) through the Tuya Smart or Smart Life application. It requires a Tuya ZigBee Gateway to function.

MatSee Plus ZigBee Energy Meter with current clamp and app interface

Image: Product overview showing the ZigBee energy meter, current clamp, and a smartphone displaying the "Zigbee Digital Meter 3" app interface with voltage, current, and power readings.

2. Technical Specifications

AttributeValue
Input VoltageAC 100-240V 50/60Hz
Measuring Range0.2A-80A
Wireless ProtocolZigBee
App NameTuya Smart, or Smart Life
WiFi Frequency2.4Ghz (Not Support 5Ghz)
CompatibilityAll Compatible
State of AssemblyReady-to-Go
CertificationsCE, RoHS
Device Size50*45*23mm
Clamp Diameter10mm
Working Temperature-10 °C ~ +55 °C

The device is designed for a maximum measured current of 80A, suitable for monitoring various household appliances.

Max Measured Current 80A diagram

Image: Diagram illustrating the 80A maximum measured current capacity, showing the meter and clamp connected to various household appliances.

The compact design allows for easy installation, including mounting on a 35mm DIN rail.

Dimensions of the energy meter and current clamp

Image: Dimensional drawing of the energy meter (50x46mm) and the current clamp (10mm diameter, 0.7m cable length).

Energy meter mounted on a 35mm DIN rail

Image: Energy meter mounted on a 35mm DIN rail.

3. Safety Warnings

3.1. Safety Installation

WARNING: Failure to follow these instructions may result in death or serious injury.

  • The power clamp must be installed and serviced only by qualified electrical personnel.
  • Do not touch the terminals of the device during testing.
  • Turn off all power supply for this equipment before installing.
  • Make sure that the power supply is off before connecting or disconnecting it to an auxiliary device.
  • Always use a properly rated voltage sensing device to confirm power is off.
Danger Electric Shock Warning Symbol

Image: Danger Electric Shock Warning Symbol.

3.2. Safety Handling

WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the Power Clamp and other property. Read all the safety notices below before using the Power Clamp.

  • Avoid high humidity or extreme temperatures.
  • Avoid long exposure to direct sunlight or strong ultraviolet light.
  • Do not drop or expose the unit to intense vibration.
  • Do not disassemble or try to repair the unit on your own.
  • Do not expose the unit or its accessories to flammable liquids, gases or other explosives.

4. Setup Guide

4.1. Download the App

To use the energy meter, you need to download either the 'Smart Life' or 'Tuya Smart' application on your smartphone. Scan the QR codes below or search for the apps in the App Store (iOS) or Google Play/Android Market.

Important: Ensure you have a Tuya ZigBee gateway and it is configured with the app before adding this ZigBee Meter.

App Download Diagram with QR codes

Image: Diagram showing the network connection for the app: Router (2.4G WiFi) -> Gateway (ZigBee) -> APP (Android/iOS) and Router (Internet) -> Server (WiFi/GPRS) -> APP. Includes QR codes for Smart Life and Tuya Smart apps.

4.2. Wiring Diagram

Follow the wiring diagram carefully to ensure correct installation and accurate readings. Incorrect wiring can lead to inaccurate measurements or device malfunction.

Wiring Diagram for ZigBee Energy Meter

Image: Detailed wiring diagram for the energy meter, showing L (Live) and N (Neutral) connections, and the current clamp around the Live wire of the measured device.

Note: Please only put one wire (either live wire or neutral wire) into the current transformer, not both wires together, otherwise the reading value will be zero.

4.3. Add the Device to App

Once the physical installation is complete and your ZigBee gateway is set up, you can add the energy meter to your app:

  1. Ensure the device is powered on.
  2. Press the reset button on the energy meter for approximately 5 seconds until the red LED light flashes quickly. This indicates the device is in pairing mode.
  3. In the Smart Life or Tuya Smart app, navigate to your ZigBee gateway and select 'Add subdevice' or similar option.
  4. Confirm that the LED is blinking in the app and proceed with the discovery process.
  5. Once discovered, the device will be added to your app. Click 'DONE' to complete the process.
App screenshots for adding deviceApp screenshots for pairing mode confirmation

Images: App screenshots showing the "Add subdevice" interface and the "Ensure device is in pairing mode (LED is blinking)" prompt with reset instructions.

Video: Demonstrates the pairing process of the ZigBee energy meter with a wireless ZigBee gateway and the Tuya Smart Life app, followed by real-time power monitoring.

5. Operating Instructions

After successfully adding the device, you can monitor your electricity usage through the app.

  1. Open the Smart Life or Tuya Smart app.
  2. Select your 'Zigbee Digital Meter' from the device list.
  3. The app will display real-time data including Voltage (V), Current (mA), and Power (W).
  4. You can view historical KWh consumption data by day, month, or year.
  5. The app also provides an 'Energy Saving' overview, showing usage and estimated costs over time.
App screenshot showing device added and workingApp screenshots showing real-time data and KWH graph

Images: App screenshots showing "1 devices have been successfully added" and the "Zigbee Digital Meter 3" interface displaying "Device is working" with voltage, current, and power, along with KWH consumption graphs.

App screenshots showing energy saving overview and consumption details

Image: App screenshots showing "Energy Saving" overview with usage in kWh and costs, and detailed "Energy Consumption" by week and month.

6. Maintenance

6.1. General Care

  • Keep the device clean and free from dust.
  • Do not expose the device to water or excessive moisture.
  • Store the device in a dry environment within the specified operating temperature range.

6.2. Uninstalling the Clamp

WARNING!!! FOR SAFETY. If you need to remove the current transformer clamp, please be sure to turn off the power of the measuring device first, otherwise there is a risk of electric shock.

7. Troubleshooting

7.1. "Device is power off" in App

Q: After I configure it with the App, why does the App show 'Device is power off'?

A: This message appears if the current clamp is not sensing any current. Ensure that you have correctly installed the device's wire (either live wire or neutral wire, but not both) into the clamp, and that the measured device is turned on. The clamp needs to sense current for the app to show 'Device is working'.

App screenshot showing 'Device is power off' and correct clamp installation

Image: App screenshot showing "Device is power off" and an image of a current clamp correctly installed around a single wire.

7.2. Reading Value is Zero

If the energy meter consistently shows a zero reading despite power being consumed, verify the current clamp installation. As noted in the wiring diagram, only one wire (either live or neutral) should pass through the current transformer clamp. If both wires are placed together in the clamp, the magnetic fields will cancel out, resulting in a zero reading.

7.3. Pairing Issues

If you are unable to pair the device:

  • Ensure your Tuya ZigBee Gateway is properly set up and connected to the internet.
  • Confirm the energy meter is in pairing mode (red LED blinking quickly). If not, reset it by holding the reset button for 5 seconds.
  • Make sure your phone's WiFi is on 2.4GHz, as the device does not support 5GHz WiFi.

7.4. Device Not Working on 12V

This device is designed for AC 100-240V systems. It will not function correctly on a 12V power supply.

8. User Tips

  • Home Assistant Integration: While the device works with Zigbee2mqtt for Home Assistant, some users report a flood of messages. You may need to calibrate the offset in Home Assistant to match your main electricity meter for accurate readings.
  • Hubitat Compatibility: Some users have successfully paired this device with Hubitat hubs using built-in drivers. Be aware of potential minor discrepancies in wattage readings due to calibration variance.
  • Gateway Requirement: This device requires a Tuya ZigBee Gateway. It cannot directly connect via WiFi for consumption readings without the gateway.
  • Current Clamp Size: The current transformer (CT) clamp has a 10mm diameter hole, which fits cables up to approximately 16mm.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Refer to the official product page or packaging for specific contact details.

A user manual in PDF format may also be available for download from the seller's website or product page. This document provides a textual summary of key instructions and specifications.

© 2023 MatSee Plus. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.