1. Introduction
Thank you for choosing the seediq LED Recessed Wall Light. This product is designed to provide efficient and convenient lighting for indoor spaces such as corridors, steps, stairs, kitchens, dining rooms, bedrooms, foyers, and studies. Featuring a built-in PIR (Passive Infrared) motion sensor and a Lux sensor, it automatically illuminates when motion is detected in low light conditions, enhancing safety and energy efficiency.



2. Safety Information
- Always cut off the main power supply before installation, maintenance, or cleaning to prevent electric shock.
- Installation should be performed by a qualified electrician or in accordance with local electrical codes.
- Ensure the voltage supply matches the product's specifications (90-260V AC).
- Do not attempt to modify or disassemble the light fixture.
- Keep the product away from water and high humidity environments unless specifically rated for such use.
- This product is designed for indoor use only.
3. Package Contents
Please check the package for the following items:
- seediq LED Recessed Wall Light (1 unit)
- Mounting Screws (Quantity may vary)
- User Manual (This document, also available as a PDF download)
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | seediq |
| Item Type | Wall Lamps |
| Light Source | LED (Bulbs Included) |
| Number of Light Sources | 8 |
| Power Source | AC |
| Voltage | 90 - 260 V |
| Luminous Flux | 249-2000 lumens |
| Installation Type | Recessed In (Assembly required) |
| Body Material | PC (Plastic) |
| Shade Type | Plastic |
| Shade Direction | Down |
| Color Temperature | Warm White (2700-3500K) |
| Is Dimmable | No |
| Switch Type | Sensor (PIR Motion Sensor) |
| Sensing Angle | 90 degrees |
| Sensing Distance | Less than 3 meters |
| Lighting Area | 1-3 square meters |
| Certification | CCC, CE, ROHS |
| Warranty | 1 year |
| Product Dimensions (Model Sunny) | 86x86mm / H:35mm |



5. Installation Guide
WARNING: Before installation, please cut off the main power supply to prevent electric shock.
The 86 type bottom box needs to be installed in advance. This lamp is recommended to be installed at a distance of 50-20mm from the ground. The recommended installation distance between multiple lamps is 500-800mm.
Connect Wiring:
Connect the reserved wires (Live 'L' and Neutral 'N') to the corresponding terminals on the back of the lamp's bottom box.
Fix Bottom Box:
Secure the lamp's bottom box into the wall using appropriate screws.
Attach Panel:
Snap the front panel onto the properly installed bottom box to complete the installation.

6. Operating Instructions
This LED Recessed Wall Light features an integrated PIR motion sensor and a Lux sensor for automatic operation.
6.1 PIR Motion Sensor Functionality
- The light will automatically turn on when motion is detected within its sensing range.
- The sensing angle is 90 degrees.
- The sensing distance is less than 3 meters.
- After an object leaves the sensing range, the light will automatically turn off after approximately 30 seconds.
6.2 Lux Sensor Functionality
- The light will only turn on when the ambient light level (lumens) is less than 5.
- If the ambient light level is greater than 5 lumens, the light will not turn on automatically, even if motion is detected. This feature helps save energy during daylight hours.
7. Maintenance
- Ensure the power is off before cleaning.
- Wipe the light fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Regularly check for any loose connections or damage. If any damage is found, discontinue use and consult a qualified electrician.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Ambient light is too bright (Lux sensor active). No motion detected. Loose wiring. | Check power connection. Test in a darker environment. Ensure motion is within sensing range. Recheck wiring connections (with power off). |
| Light stays on continuously. | Constant motion in sensing area. Sensor malfunction. | Ensure no continuous motion. Contact support if problem persists. |
| Light flickers. | Unstable power supply. Loose connection. | Check power source stability. Recheck wiring connections (with power off). |
9. User Tips
- For optimal motion detection, ensure the sensor is not obstructed by furniture or other objects.
- Consider the ambient light conditions in your installation area. The Lux sensor prevents the light from activating unnecessarily during the day, saving energy.
- The wide voltage range (90-260V) makes this light suitable for various electrical systems, including 230V setups.
10. Warranty and Support
This product comes with a 1-year warranty from the date of purchase. For warranty claims, technical support, or any inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.