T&G TG117

Contents

T&G TG117 Portable Bluetooth Speaker User Manual

1. Introduction

Thank you for purchasing the T&G TG117 Portable Bluetooth Speaker. This speaker features advanced wireless audio decoding, TWS functionality for stereo sound, FM radio, and support for TF card and USB drive playback. Its compact, waterproof design makes it ideal for outdoor and home use. Please read this manual carefully to ensure proper use and optimal performance.

2. Package Contents

Please check the box for the following items:

  • T&G TG117 Portable Bluetooth Speaker
  • Micro USB V8 Charging Cable
  • AUX Cable (3.5mm)
  • User Manual (this document)
T&G TG117 Speaker with included charging and AUX cables
T&G TG117 Speaker and included accessories: charging cable and AUX cable.

3. Product Overview

Familiarize yourself with the speaker's buttons and ports:

Diagram of T&G TG117 speaker buttons and ports: On/Off, Next Song/Volume+, Previous Song/Volume-, Mode Switch (BT/FM), TF Card Slot, Charging Port, USB Slot, AUX Jack.
Labeled diagram of the T&G TG117 speaker's controls and connections.
  1. On/Off Button: Long press to power on/off.
  2. Next Song / Volume+ Button: Short press for next song, long press to increase volume.
  3. Previous Song / Volume- Button: Short press for previous song, long press to decrease volume.
  4. Mode Switch (M) Button: Short press to switch between Bluetooth, TF Card, USB, Line In, and FM modes. Long press for TWS pairing.
  5. TF Card Slot: Insert a TF (Micro SD) card for MP3 playback.
  6. Charging Port (DC 5V): Micro USB V8 port for charging the speaker.
  7. USB Slot: Insert a USB drive for MP3 playback.
  8. AUX Jack: 3.5mm input for connecting external audio devices.

4. Setup

4.1. Charging the Speaker

Before first use, fully charge the speaker. Connect the Micro USB V8 charging cable to the speaker's charging port and the other end to a 5V/500mA USB power source (e.g., wall adapter, computer USB port). The charging time is approximately 3-4 hours.

4.2. Power On/Off

  • Power On: Long press the On/Off button. You will hear a loud power-on sound.
  • Power Off: Long press the On/Off button again. You will hear a loud power-off sound.

4.3. Bluetooth Pairing

The speaker will automatically enter Bluetooth pairing mode after powering on if no other mode is selected.

  1. Turn on the speaker. It will emit a prompt sound indicating it's ready for pairing.
  2. Enable Bluetooth on your mobile device (smartphone, tablet, etc.).
  3. Search for available Bluetooth devices and select "TG117" from the list.
  4. Once paired, the speaker will emit a confirmation sound.
Multiple T&G TG117 speakers in various colors, highlighting Wireless Bluetooth V5.3 technology.
The TG117 speaker supports Bluetooth V5.3 for stable wireless connection.

4.4. True Wireless Stereo (TWS) Pairing

TWS allows you to connect two TG117 speakers for a stereo sound experience.

  1. Ensure both TG117 speakers are powered on and in Bluetooth mode, but NOT connected to any mobile device.
  2. On one of the speakers, long press the Mode (M) button for 2-3 seconds until you hear a "du du du" prompt sound. The button light on this speaker should stop flashing, indicating successful TWS connection.
  3. Now, enable Bluetooth on your mobile device and connect to "TG117". Both speakers will play in stereo.
T&G TG117 speaker highlighting TWS function for connecting two speakers and call function with noise elimination microphone.
The TWS function allows two speakers to connect for an enhanced stereo effect.

5. Operating Instructions

5.1. Mode Switching

Short press the Mode (M) button to cycle through available modes: Bluetooth, TF Card, USB, Line In, and FM Radio.

5.2. Music Playback (Bluetooth, TF Card, USB, Line In)

  • Play/Pause: Short press the On/Off button.
  • Next Song: Short press the Volume+ button.
  • Previous Song: Short press the Volume- button.
  • Volume Up: Long press the Volume+ button.
  • Volume Down: Long press the Volume- button.

Note for TF Card/USB Playback: Ensure your TF card or USB drive is formatted to FAT32 and contains MP3 audio files.

5.3. FM Radio

  1. Switch to FM mode using the Mode (M) button.
  2. For better reception, connect the Micro USB charging cable to the charging port; it acts as an antenna.
  3. Auto Search: Short press the On/Off button to automatically search for and save FM stations.
  4. Stop Search: Short press the On/Off button again during auto search to stop.
  5. Change Station: Use the Volume+ and Volume- buttons to navigate between saved stations.

5.4. Hands-Free Calling

When your mobile device is paired via Bluetooth:

  • Answer Call: Short press the On/Off button when a call comes in.
  • End Call: Short press the On/Off button during a call.
  • Redial Last Number: Double press the On/Off button.

6. Specifications

Feature Specification
Wireless VersionV5.3
Supported ProtocolsL2CAP/A2DP(AVCTP/AVDTP/AVRCP), HSP/HFP
Working DistanceUp to 10 meters
Signal-to-Noise Ratio (SNR)≥90dB
Battery Capacity1200mAh
Built-in Voltage3.7V
Playback Time (Normal Volume)3-4 hours
Speaker Driver Size45mm * 2
Speaker Power Output5W * 2
Frequency Response120Hz-20KHz
Dimensions (L x W x H)160mm x 68.8mm x 68.8mm
Unit WeightApprox. 419g (excluding accessories)
Charging InputDC 5V/500mA
Charging Time3-4 hours
Waterproof RatingIPX5
Built-in MicrophoneYes
Supported MediaTF Card, USB Drive (MP3 format, FAT32)
CertificationsCE, FCC, RoHS
T&G TG117 speaker being splashed with water, illustrating its IPX5 waterproof feature.
The TG117 speaker features an IPX5 waterproof rating, making it resistant to splashes.

7. Troubleshooting

  • Speaker does not turn on: Ensure the battery is charged. Connect to a power source and try again.
  • Cannot pair via Bluetooth: Make sure the speaker is in Bluetooth pairing mode (not connected to another device). Turn off and on your device's Bluetooth, then search again. Ensure the speaker is within 10 meters of your device.
  • No sound or low volume: Check the volume levels on both the speaker and your connected device. Ensure the correct mode is selected.
  • FM radio reception is poor: Connect the Micro USB charging cable to the charging port; it functions as an external antenna to improve signal strength.
  • TF card/USB drive not playing: Ensure the media is formatted to FAT32 and contains MP3 audio files. Reinsert the card/drive.
  • Speaker automatically turns off: If the speaker is in wireless mode and not connected to any device, it will automatically power off after 30 minutes to save battery.
  • Loud power on/off sound: This is a characteristic of the speaker and cannot be adjusted.

8. Maintenance

  • Keep the speaker away from extreme temperatures, direct sunlight, and corrosive liquids.
  • Clean the speaker with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • If the speaker will not be used for a long period, charge it fully at least once every three months to preserve battery life.
  • Do not attempt to disassemble or repair the speaker yourself, as this will void the warranty and may cause damage.

9. User Tips

  • Many users find the sound quality to be excellent for a speaker of its size and price point.
  • The battery generally provides a good duration of playback, often exceeding expectations.
  • The TF card and USB drive playback functions are reliable and convenient for playing stored music.
  • Remember to use the charging cable as an antenna for improved FM radio reception.
  • Be aware that the speaker produces a loud sound when powering on and off.

10. Warranty and Support

This product comes with a standard manufacturer's warranty. Please retain your proof of purchase for any warranty claims. For detailed warranty information or technical support, please refer to the official product page or contact the seller directly.

A comprehensive user manual in PDF format is also available for download: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.