1. Introduction
This manual provides instructions for the FD Universal Garage Door Remote Control, designed to be compatible with BENINCA TO.GO series gate and garage door openers. This remote operates on a 433.92MHz frequency and utilizes rolling code technology for enhanced security. Please read this manual carefully before use to ensure proper operation and longevity of your device.
2. Product Overview
The FD Universal Remote Control is a compact and durable device featuring two or four programmable buttons, an LED indicator, and a secure battery compartment. It is designed for convenient control of your compatible garage door or gate system.
Figure 2.1: Front view of the remote control with lanyard.
Figure 2.2: Size comparison of the remote control.
3. Specifications
| Feature | Specification |
|---|---|
| Frequency | 433.92 MHz |
| Channels | 2 or 4 |
| Wireless Communication | RF |
| Power Supply | 1 x 12V Alkaline Battery (Type 23A) |
| Transmission Consumption | 18 mA |
| Available Codes | 18 billionth of billions |
| Antenna | Built-in |
| Oscillator Type | SAW |
| Operating Temperature | -20°C to +70°C (-4°F to +158°F) |
| Certification | CE |
4. Battery Installation and Replacement
The remote control uses one 12V Alkaline battery (Type 23A).
- Locate the battery compartment cover on the back of the remote control.
- Slide or gently pry open the cover to access the battery compartment.
- Insert the 12V 23A battery, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Replace the battery compartment cover until it clicks securely into place.
Figure 4.1: Rear view showing the battery compartment cover.
Figure 4.2: Internal view with battery installed.
5. Setup and Programming
Important: The programming procedure for this remote control depends entirely on the specific model of your BENINCA receiver (garage door opener or gate opener). This remote does not have a universal self-programming method.
To program your remote control:
- Refer to the instruction manual of your BENINCA garage door or gate opener receiver.
- Follow the specific programming steps outlined in your receiver's manual to pair a new remote control. This typically involves pressing a programming button on the receiver unit and then activating a button on the new remote.
LED Indicator during Programming/Transmission:
- When a button is pressed and the remote is transmitting a code, the LED indicator on the remote will light up with a fixed, steady light.
- If the remote control's battery is low, the LED will flash during transmission. This indicates that the battery needs to be replaced soon.
6. Operating Instructions
Once programmed, operate your garage door or gate as follows:
- Point the remote control towards your garage door or gate opener.
- Press the programmed button corresponding to the function you wish to activate (e.g., open, close, stop).
- The LED indicator will light up steadily during transmission.
7. Maintenance
- Battery Replacement: Replace the battery when the LED indicator flashes during operation (refer to Section 4).
- Cleaning: Clean the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the remote in a dry place, away from direct sunlight and extreme temperatures.
8. Troubleshooting
- Remote not working:
- Check the battery. If the LED flashes or does not light up, replace the battery.
- Ensure the remote is properly programmed to your receiver. Refer to your receiver's manual for programming instructions.
- Ensure you are within range of the receiver.
- LED not lighting up:
- The battery may be completely depleted. Replace the battery.
- Ensure the battery is inserted with correct polarity.
9. User Tips
No specific user tips are available for this product at this time. Always ensure your remote is kept in a safe place to prevent accidental activation of your garage door or gate.
10. Disposal
Battery Disposal: Please dispose of used batteries according to local regulations. Do not dispose of batteries in household waste or fire. Batteries contain materials that can be harmful to the environment if not disposed of properly.
Product Disposal: At the end of its service life, this product should not be disposed of with general household waste. Please dispose of it at an appropriate collection point for the recycling of electrical and electronic equipment.
11. Support
For any issues or questions not covered in this manual, please contact your seller for assistance. Please have your product model information ready when contacting support.
A PDF version of the original BENINCA manual (L8542832) is available for reference at: Original Manual (PDF)