BONDA Smart WiFi Touch Switch User Manual

Introduction

Thank you for choosing the BONDA Smart WiFi Touch Switch. This device allows you to control your home lighting and appliances remotely via the Tuya or Smart Life app, voice commands through Amazon Alexa or Google Assistant, or locally via touch and RF433 remote control. This manual provides essential information for safe installation, setup, and operation of your smart switch.

Safety Information

• Always ensure the electricity supply is turned OFF at the main circuit breaker before installation, maintenance, or removal of the switch.
• Installation should be performed by a qualified electrician or in accordance with local electrical codes.
• Do not operate the switch with wet hands.
• Do not install in excessively humid environments.
• This device is designed for indoor use only.

Package Contents

• BONDA Smart WiFi Touch Switch (1/2/3/4 Gang, depending on model)
• Capacitor (for single live wire installations)
• Mounting Screws
• User Manual (this document)

Specifications

Installation

WARNING: Ensure electricity is cut off at the main circuit breaker before proceeding with installation.

1. Remove the Panel

Carefully remove the front glass panel of the switch using a screwdriver to expose the mounting and wiring components.

2. Wiring Diagram

The BONDA Smart WiFi Touch Switch supports both Live & Neutral wire and Single Live wire installations. Refer to the diagrams below for correct wiring.

Live & Neutral Wire Installation (Neutral wire required)

• Connect the Fire wire to the 'L' terminal.
• Connect the Lamp wire(s) to the 'L1, L2, L3, L4' terminals as appropriate for your gang configuration.
• Connect the Neutral wire to the 'N' terminal.

Single Live Wire Installation (No Neutral wire required)

• Connect the Live wire to the 'L' terminal.
• Connect the Lamp wire(s) to the 'L1, L2, L3, L4' terminals as appropriate for your gang configuration.
• Connect the provided capacitor across the first lamp wire and the neutral wire of the light fixture. This is crucial for stable operation in single live wire setups.

Note: The switch with an "N" terminal supports both wiring modes. For single live wire, ensure the capacitor is correctly installed.

Setup & Pairing

1. Download the Smart Life App

To control your smart switch via smartphone, download the "Smart Life" application:

• Scan the QR code below (not provided in text, but implied by OCR) or search "Smart Life" in your device's app store (iOS App Store or Google Play Store).
• Download and install the application.
• Register or log in using your phone number for a verification code, or other available methods.

2. RF433mhz Setting Mode

1. Touch and hold any switch button until its blue backlight flashes once.
2. Release the button.
3. Press the button on your RF433 remote controller (which needs to be a learning-type remote) to complete the pairing.

3. RF Code Delete Method

1. Touch and hold any switch button until its blue backlight flashes twice.
2. Release the button. All RF control functions previously learned on the switch will be cleared automatically.

4. WiFi Setting Mode (Easy Mode)

If the switch flashes quickly after power on, you can proceed directly to this mode.

1. Touch and hold any button on the switch until its blue backlight flashes alternately and quickly.
2. Release the button.
3. Open the "Smart Life" or "Tuya Smart" app.
4. Tap the "+" icon in the upper right corner.
5. Select "Switch (WIFI)".
6. Enter your WiFi network password and follow the in-app prompts to complete the pairing.

5. WiFi Configuration (AP Mode)

1. Touch and hold any button on the switch until its blue backlight flashes alternately and slowly.
2. Release the button.
3. Open the "Smart Life" or "Tuya Smart" app.
4. Tap the "+" icon in the upper right corner.
5. Select "Switch (WIFI)".
6. Enter your WiFi network password and follow the in-app prompts to complete the pairing.

Operating Instructions

1. Manual Touch Control

Simply touch the capacitive touch panel to turn your lights ON or OFF. The LED backlight will guide you in the dark.

2. App Control (Tuya / Smart Life)

Once paired with the Smart Life or Tuya app, you can control your lights from anywhere using your smartphone or tablet.

3. Voice Control (Amazon Alexa / Google Assistant)

The switch works with Amazon Alexa and Google Assistant. After linking your Smart Life/Tuya account to your voice assistant, you can use voice commands to control your lights.

• Example commands: "Alexa, turn on the living room light," or "Hey Google, turn off the kitchen light."

4. Scheduling and Timers

Use the Smart Life or Tuya app to set timing switches to automatically turn your lights and appliances ON/OFF. You can create schedules based on time, sunrise/sunset, or other conditions.

Maintenance

The switch features a flat mirror surface that is easy to clean. Use a soft, dry cloth to wipe the surface. Avoid abrasive cleaners or harsh chemicals that could damage the finish.

Troubleshooting

• Switch not responding to touch: Ensure the power is on. If recently installed, check wiring connections.
• WiFi pairing issues: Make sure your WiFi network is 2.4GHz. Ensure the switch is in the correct pairing mode (fast flashing for Easy Mode, slow flashing for AP Mode). Check your WiFi password.
• Voice control not working: Verify that your Smart Life/Tuya account is correctly linked to Amazon Alexa or Google Assistant. Check your internet connection.
• Lights flicker or don't turn off completely (Single Live Wire): Ensure the capacitor is correctly installed across the light fixture. This is essential for stable operation without a neutral wire.
• Switch does not fit wall box: The switch is designed for standard EU wall boxes (86x86mm). Verify your wall box dimensions before purchase.
• RF433 remote not working: Ensure the remote is a learning-type remote and has been correctly paired using the RF433mhz setting mode.
• Switch not working with 12V: This switch is designed for 100-240V AC. It is not compatible with 12V DC systems, such as those found in camper vans.

User Tips

• For single live wire installations, the included capacitor is crucial for preventing flickering and ensuring proper operation. Install it across the light fixture.
• The RF433 feature allows for multi-way control when paired with compatible RF433 remotes or other switches, offering flexible control options beyond just app and voice.
• Regularly check for app updates to ensure you have the latest features and security enhancements for your smart switch.

Warranty & Support

This BONDA Smart WiFi Touch Switch comes with a 1-year warranty from the date of purchase, covering manufacturing defects.

For further assistance or detailed diagrams, you may refer to the official user manual PDF: View User Manual (PDF).

Please contact BONDA customer support for any warranty claims or technical inquiries.