1. Product Information
This manual provides instructions for the installation, operation, and maintenance of the BAKALA Chrome Brass Triangle Valve, Model JF-009. This valve is designed for controlling hot or cold water flow in plumbing systems.
For a detailed user manual in PDF format, please refer to: User manual (PDF)
2. Safety Precautions
- Always turn water OFF at the main supply before removing existing fixtures or disassembling the valve.
- Open faucet handles to relieve water pressure and ensure complete water shut-off has been accomplished.
- Operation with unpressurized storage heaters is not possible.
- This product is suitable for indoor public places and common residences.
3. Installation
3.1 Pre-Installation Steps
- Flush the piping system thoroughly both before and after installation of the fitting. This helps prevent impurities like sediment from affecting valve performance. (Consider EN 806 standards for piping systems).
- Ensure the water inlet pipe is laid at a suitable height on the wall.
3.2 Installation Procedure
- Wrap the thread Teflon tape into the decorative cover and screw it into the inlet tube.
- Insert the water outlet with a screwdriver and screw the water inlet end into the wall inlet tube.
- Connect the water source of the pipeline and check whether the thread is sealed.
- The installation diagram below is a model; the actual product may vary slightly, but the method remains the same.
3.3 Post-Installation
- Check all connections for leaks.
- Verify the function of the valve by turning it ON and OFF.
- A temperature limiter can be fitted if desired.
4. Operation
The BAKALA Triangle Valve is designed for simple ON/OFF control of water flow. The valve features clear red and blue indicators to distinguish between hot and cold water lines, preventing accidental misoperation.
- Red Indicator: Typically for hot water lines.
- Blue Indicator: Typically for cold water lines.
5. Maintenance
To ensure the valve remains clean and bright, and to prolong its service life, please follow these cleaning procedures regularly:
- Use rinsing water and a soft cloth to clean any residue and film on the surface.
- For stubborn residue, use only recommended cleansers. Avoid abrasive cleaners or harsh chemicals that may damage the chrome finish.
- After cleaning, immediately flush out all cleanser with rinsing water and dry the surface with a soft cotton cloth.
- Carefully dismantle the aerator (if applicable to your connected fixture) regularly. Rinse it under clean running water until any loose debris is cleared to avoid affecting water outflow.
6. Troubleshooting
While the BAKALA Triangle Valve is designed for durability and reliability, here are some common issues and potential solutions:
- Leakage: Ensure all connections are properly tightened and sealed with Teflon tape during installation. Check for any visible cracks or damage to the valve body.
- Reduced Water Flow: This could be due to debris in the water lines or within the valve. Ensure the piping system was flushed thoroughly during installation. If connected to a fixture with an aerator, clean the aerator as described in the maintenance section.
- Difficulty Turning Valve: Over time, mineral deposits can affect the smooth operation. Regular cleaning can help. If the issue persists, the internal ceramic cartridge might need inspection or replacement.
- Incorrect Connection Size: Ensure the valve's G1/2" inlet/outlet threads match your plumbing system. Some users may require adapters for 3/8" connections.
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | BAKALA |
| Model Number | JF-009 |
| Type | Filling Valves (Angle Valve) |
| Material | 59# Copper Brass Body, Ceramic Cartridge |
| Finish | Chrome, Multi-layer precision electroplating |
| Certification | CE |
| Origin | Mainland China |
| Connection Size | G1/2" (Inlet/Outlet) |
| Water Pressure Range | 0.05 - 1.0 Mpa |
| Water Temperature Range | 0 - 90 ℃ |
| Valve Core Life | Up to 60 million switches |
| Features | Anti-rust, Anti-burst, Anti-leakage, High pressure ceramic valve disc (withstands >10bar pressure), Lead-free and non-toxic special seal ring. |
8. Warranty and Support
8.1 Warranty Information
- Within one year: Product quality problems resulting in damage are eligible for free repair, and free accessories are provided.
- Within three years: Product quality issues will receive free accessories; however, the cost of accessories is not covered.
8.2 Manufacturer and Representative Information
Manufacturer: Wenzhou bo rui dian zi shang wu you xian gong si
Address: No. 25 Chuangxin road, erjia village, tianhe, longwan, wenzhou, China 325000
Email: admin@brighten.com
Phone: +86-577-8801-008
EU Authorized Representative: KD EUROPE
Address: 16-424, Stara Debszczyzna 4, Filipów Czwarty, Podlaskie, PL(Poland)
Email: Kdeurope.office@gmail.com
Phone: +48510181779
9. User Tips
- Verify Connection Sizes: Before purchasing, double-check your existing plumbing connections to ensure compatibility with the valve's G1/2" threads. Adapters may be needed for other sizes like 3/8".
- Hot/Cold Identification: The clear red and blue indicators are designed to help you easily identify hot and cold water lines, reducing the chance of misconnecting or misoperating the valves.
- Smooth Operation: The comfortable feel design of the valve handle ensures ease of use when turning water flow on or off.