SPEEDRACING AF-1003

Contents

Universal Car Air Filter Instruction Manual

Model: AF-1003 | Brand: SPEEDRACING

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your SPEEDRACING Universal Car Air Filter. Designed for universal fitment in vehicles, motorcycles, boats, and racing cars, this high-flow air filter is engineered to improve engine performance by optimizing air intake.

2. Safety & Warnings

Important Safety Information:

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord (if applicable) out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

Note: This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.

3. Product Overview

The SPEEDRACING Universal Car Air Filter is a high-performance component designed to enhance your engine's efficiency. It features a mushroom head design for direct bolt-on installation and is available in 76mm (3") and 100mm (4") neck sizes to fit various air inlet systems.

SPEEDRACING Universal Car Air Filter
SPEEDRACING Universal Car Air Filter (Red) with clamp, available in 76mm and 100mm neck sizes.

Key Features:

  • Straighten the flow: Optimized design for smoother air intake.
  • Stop sucking hot air: Relocates filter outside engine compartment for cooler air.
  • Washable & Reusable: Economical and practical filter cartridge.
  • Increase the amount of air flow: Cotton gauze & iron mesh construction.
  • C-clip connection: Ensures a tight, leak-free connection.
Features of the air filter
Diagram illustrating key features: straightened flow, prevention of hot air intake, washable/reusable design, and increased airflow.

4. Specifications

Attribute Value
Brand NameSPEEDRACING
Manufacturer Part NumberAF-1003
OEM NO.Universal
Placement on VehicleIntake system
Country/Region of ManufactureChina (Mainland)
Interchange Part NumberMushroom head air intake filter, bolt on directly.
Other Part NumberExtremely improve the smoothness of driving.
Special FeaturesPerfect replacement for aftermarket intake system.
MaterialCotton Gauze & Iron, Rubber & Stainless Steel
Item Weight0.49 kgs
Item Height160 mm
Item Width76 mm / 100 mm
Item Length118 mm

Dimensions:

Dimensions for 76mm air filter
Dimensions for the 76mm neck size variant: 76mm neck, 160mm height, 118mm length.
Dimensions for 100mm air filter
Dimensions for the 100mm neck size variant: 100mm neck, 160mm height, 118mm length.

5. Setup & Installation

Important: No installation guides are included. We highly recommend seeking professional installation. Any damage during installation will not be refunded.

The SPEEDRACING Universal Car Air Filter is designed for easy, direct bolt-on installation as a replacement for your stock air filter. Ensure the neck size (76mm or 100mm) matches your vehicle's air inlet system.

General Installation Steps:

  1. Ensure the engine is off and cool.
  2. Locate and carefully remove your vehicle's existing stock air filter.
  3. Position the new SPEEDRACING air filter onto the air inlet system.
  4. Use the provided stainless steel C-clip clamp to secure the filter firmly, ensuring a tight connection that does not leak gas.
  5. Verify that the filter is securely mounted and there are no loose connections.
Cold air intake diagram
Diagram illustrating how the cold air intake system works, drawing fresh air in and expelling fresh air out, secured by a C-clip.
Air filter installed in engine bay
Example of the air filter installed within an engine compartment, demonstrating its placement in the intake system.

6. Operation

The primary function of this high-flow air filter is to optimize your engine's performance. By relocating the filter outside the high-temperature engine compartment, it ensures that the engine draws in cooler, denser air. This fresh air contains more oxygen and fewer impurities, leading to several benefits:

  • Improved Throttle Response: A more efficient air-fuel mixture results in quicker engine reaction.
  • Enhanced Horsepower and Torque: The increased oxygen content in the combustion chamber leads to a more intense explosion, generating greater power.
  • Complete Oil Combustion: Contributes to more thorough fuel burning.
  • Decreased Oil Consumption: Optimized combustion can lead to better fuel economy.
  • Reduced Engine Carbon Deposit: Cleaner combustion minimizes carbon buildup.
  • Prolonged Engine Service Life: Reduced impurities and efficient operation contribute to engine longevity.

The air box design helps store a sufficient amount of fresh air, preventing issues caused by insufficient air intake during oil return.

7. Maintenance

The SPEEDRACING Universal Car Air Filter features a washable and reusable filter cartridge, making it an economical and practical choice. Regular cleaning is recommended to maintain optimal performance.

Cleaning Instructions:

  1. Carefully remove the air filter from the intake system.
  2. Gently tap the filter to dislodge any loose dirt or debris.
  3. Use a specialized air filter cleaning solution (not included) to thoroughly clean the filter element. Follow the cleaning solution manufacturer's instructions.
  4. Rinse the filter with low-pressure water from the clean side out until the water runs clear.
  5. Allow the filter to air dry completely before re-oiling (if it's an oiled filter) and reinstalling. Do not use compressed air or heat to dry, as this can damage the filter media.
  6. If it is an oiled filter (common for cotton gauze filters), apply a thin, even coat of air filter oil (not included) to the filter media. Do not over-oil.
  7. Reinstall the clean and dry filter into your vehicle's intake system, ensuring it is securely fastened with the C-clip clamp.

8. Troubleshooting

No specific troubleshooting steps are provided in this manual. If you encounter issues after installation or during operation, it is recommended to consult with a professional mechanic or contact customer support for assistance.

9. User Tips

  • Many users report that this filter performs comparably to original equipment manufacturer (OEM) filters, with some noting a distinct "whine" similar to stock.
  • The filter is generally considered well-made and of good quality, often compared favorably to branded alternatives like K&N, even without the specific branding.
  • Installation is straightforward for those familiar with basic automotive maintenance, as it bolts on directly. However, professional installation is always recommended to avoid potential damage.
  • While packaging may sometimes arrive wrinkled, the filter itself is typically well-protected and undamaged.

10. Frequently Asked Questions (FAQ)

Q: How durable is this air filter?
A: The air filter is designed to be durable, constructed from high-quality Cotton Gauze & Iron, Rubber & Stainless Steel materials.
Q: How well does it fit on a vehicle?
A: It is designed for universal fitment and serves as a perfect replacement for aftermarket intake systems, ensuring a good fit when the correct neck size (76mm or 100mm) is chosen.
Q: Is it easy to install?
A: Yes, it is designed for easy, direct bolt-on installation. However, professional installation is recommended to ensure proper fitting and avoid any issues.
Q: Is this a wet or dry filter?
A: Given its construction from "Cotton Gauze & Iron," it is typically an oiled (wet) filter, which requires re-oiling after cleaning to maintain its filtration properties.

11. Warranty & Support

For further assistance, inquiries, or to report any issues, please contact the manufacturer or their authorized representative using the details below.

Manufacturer Information:

  • Company Name: Zhejiang xuzhong automobile parts co., ltd
  • Address: No. 666, jingye road, economic development zone, rui'an city, wenzhou city, zhejiang province, China
  • Email: xz2014express@163.com
  • Telephone: 86-15888266370

EU Authorized Representative:

  • Company Name: SUCCESS COURIER SL
  • Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28497 Spain
  • Email: successservice2@hotmail.com
  • Telephone: 34-910602659

An official user manual (PDF) with additional guides and documents can be viewed here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.