Product Overview
Thank you for choosing the Haozee Soil Sensor. This manual provides essential information for proper use and maintenance of your device. The soil sensor is equipped with a probe made of austenitic 304 stainless steel, ensuring excellent corrosion resistance and durability. It integrates with a mobile application to provide real-time soil moisture and temperature data, and can be linked with a smart garden timer for automated irrigation.
Figure 1: Haozee Soil Sensor and Mobile App Interface
Key Features:
- Monitors real-time soil moisture and temperature.
- Mobile APP for viewing historical data curves.
- Linkage with smart garden timers for automatic irrigation.
- Powered by two AA batteries, offering low power consumption and long battery life.
- Highly sensitive probe for fast, stable, reliable, and accurate measurements.
- Quick plug-in design for easy measurement.
Application Scenes:
Suitable for various gardening environments, providing precise soil moisture measurements for comprehensive care of flowers and plants. Ideal for:
- Farm applications
- Greenhouses
- Orchard nurseries
- Garden lawns
- Potted plants
- General garden horticulture
Figure 2: Examples of Soil Sensor Application Environments
Specifications
| Parameter | Details |
|---|---|
| Power Supply | 2 pcs 1.5V AA batteries |
| Battery Lifetime | Approx. 1 year (with 2000mAh batteries) |
| Moisture Range | 0~100% |
| Moisture Accuracy | 0~50% (±3%), 50%~100% (±5%) |
| Temperature Range | -20°C~60°C |
| Temperature Accuracy | ±1°C |
| Connected Protocol | Zigbee |
| App Response Time | 60S |
| Protection Level | IP67 |
| Size (L x W x Probe) | 180mm x 46.5mm x 60mm |
Note: These parameters are for reference. Actual sensor data should be taken as the final standard.
Figure 3: Probe Material and Protection Details
Setup
1. App Download
The Haozee Soil Sensor uses the Zigbee protocol and requires a Tuya Zigbee gateway to connect to your mobile phone APP. Download the Tuya Smart or Smart Life app from your app store. You can also scan the QR code below:
Figure 4: QR Code for Smart Life App
2. Device Installation and Pairing
- Insert Batteries: Open the battery compartment and insert two 1.5V AA batteries, ensuring correct polarity.
- Insert Probe: Install the sensor by inserting the probe vertically into the soil. Ensure the probe is in full contact with the soil and compacted to ensure data accuracy. Avoid touching stones or using excessive force to prevent damage.
- Enter Pairing Mode: Press and hold the button on the soil sensor until the indicator light starts flashing, indicating it's in pairing mode.
- Open Gateway Interface: Open the Tuya Smart or Smart Life app, navigate to the gateway interface, and select 'Add Subdevice'.
- Confirm Pairing Mode: Ensure the sensor's LED is blinking. If not, reset the device (e.g., power off, then hold the RESET button for 5 seconds).
- Search for Device: In the app's pairing mode interface, the gateway will automatically search for the device.
- Add Sensor: Once found, add the sensor to the gateway and complete the connection process.
- Verify Connection: The app will display the soil sensor interface, showing current humidity and temperature readings.
Figure 5: Wireless Connection Diagram
Operating Instructions
1. Real-time Monitoring
Once connected, the mobile application will display real-time soil moisture and temperature data. You can monitor the conditions of your plants from anywhere.
2. Historical Data Viewing
The app allows you to view historical record curves for both temperature and humidity, helping you understand long-term trends and make informed decisions about plant care.
3. Automatic Irrigation Linkage
The sensor can be linked with a smart garden timer (sold separately) to enable automatic intelligent irrigation. Based on the soil moisture data, the system can trigger sprinklers or other irrigation devices to maintain optimal soil conditions.
Figure 6: Smart Irrigation System Integration
4. Measurement Best Practices
For optimal accuracy, consider the following:
- The depth and tightness of the probe in the soil directly affect the readings.
- Use multi-point testing to obtain an average value for improved accuracy.
- When measuring, ensure the probe is at a consistent depth and the surrounding soil is evenly distributed and fully compacted, making close contact with the probe surface.
Maintenance
1. Probe Cleaning
After each measurement, thoroughly clean the probe with a paper or abrasive cloth to remove any soil residue. This prevents contamination and ensures consistent accuracy for future readings.
2. Storage
When the sensor is not in use, store it in a clean, dry place. Avoid rubbing or scratching the probe directly with your hands. Keep it away from magnetic objects and other metal objects to prevent damage.
3. Battery Replacement and Disposal
The sensor is powered by two AA batteries. When the battery life is depleted (approximately 1 year with 2000mAh batteries), replace them with new ones. Please follow local waste battery recycling processes to avoid environmental pollution.
Troubleshooting
1. Inaccurate Readings
- Soil Type: Dry, sandy, or overly fertile soil may affect accuracy. If testing in such conditions, lightly water the area around the sensor and wait for about half an hour before re-testing. Optimal moisture for testing is typically 40%-70%.
- Probe Contact: Ensure the probe is fully inserted vertically into the soil and that the soil is compacted around it for good contact.
- Depth and Density: Variations in soil depth, density, and humidity can cause different readings. Perform multiple measurements at various locations and average the results.
- Probe Cleanliness: A dirty probe can lead to inaccurate readings. Clean the probe thoroughly after each use.
2. Pairing Issues
- LED Not Blinking: If the sensor's LED is not blinking during pairing, reset the device by powering it off and then holding the RESET button for 5 seconds.
- Zigbee Gateway: Ensure you have a Tuya Zigbee gateway, as the sensor uses the Zigbee protocol and cannot connect directly to Wi-Fi or other smart home platforms without a compatible hub.
3. Temperature Measurement Discrepancies
Some users have reported that the temperature measurement may be slightly off or reflect air temperature rather than soil temperature. Ensure the probe is fully submerged in the soil for the most accurate soil temperature reading. If persistent discrepancies occur, consider cross-referencing with another thermometer.
4. Calibration
The sensor is designed for direct use and does not feature a user-accessible calibration function. For optimal accuracy, follow the measurement best practices outlined in the Operating Instructions.
User Tips
- Home Assistant Integration: This sensor is known to work well with Home Assistant setups using Zigbee2MQTT and Mosquito.
- Outdoor Durability: The IP67 protection class makes this sensor suitable for outdoor use, capable of withstanding heat and rain.
- Moisture Readings: The sensor provides accurate moisture readings, helping users understand when soil is dry (e.g., below 100% indicates dryness).
- Zigbee Hub Required: Remember that a Zigbee hub (like a Tuya Zigbee gateway) is essential for connecting the sensor to your smart home system.
Warranty and Support
Warranty Period:
- Host Circuit: One (1) year from the date of purchase.
- Probe: Six (6) months from the date of purchase.
Warranty Service:
During the warranty period, if a fault occurs under normal use and in accordance with this instruction manual (as determined by the company's official staff), the product will be repaired free of charge.
Conditions for Paid Repair (not covered by warranty):
- Inability to provide the warranty card and valid proof of purchase.
- Malfunctions or damages caused by misuse or improper repairs by users.
- Damage caused by transportation, handling, or dropping after receiving the product.
- Damage caused by other unavoidable external factors.
- Malfunction or damage caused by equipment soaking.
This warranty is limited to the terms stated above. No other express or implied warranties (including implied warranties of merchantability, reasonableness, and adaptability for a specific application) are made. The company is not responsible for any special, incidental, or consequential damages.
For further assistance or to view the full item guides and documents, please refer to the official PDF manual: User Manual (PDF).
Product Video Overview
Video: A brief overview of the Haozee Soil Sensor's features and benefits, including its smart control capabilities and waterproof design.