Welcome
Thank you for purchasing the Juson Audio JTA50 Hybrid Tube Amplifier. This amplifier has been designed to make it easy for anyone to enjoy the warm, natural sound quality of vacuum tube amplification without the power consumption and price of using traditional tube amplifiers. The JTA50, from Juson Audio, combines the best of both worlds: the rich, detailed sound of a tube preamplifier with the modern power of a class A/B power amplifier. Additionally, this amplifier includes analog and digital inputs for connecting modern devices such as computers.
Important Safety Instructions
CAUTION: DO NOT OPEN. To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
FCC STATEMENT:
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (a) This device may not cause harmful interference. (b) This device must accept any interference received, including interference that may cause undesired operation.
- NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
What's in the Box
Please check that nothing is missing from the package:
- 1 * JTA50 Hybrid Stereo Tube Amplifier
- 1 * Remote Control
- 1 * AC Power Cable
- 1 * User Manual

Controls and Functions
Front Panel

- IR (Infrared Receiver): Receives signals from the remote control.
- Power Switch / Power Indicator: Toggles the device on/off and indicates power status.
- VU Meter: Displays the audio output level for the left and right channels.
- Bass Control: Adjusts the low-frequency response.
- Treble Control: Adjusts the high-frequency response.
- 1/4" TRS Headphone Output: For connecting headphones. Plugging in headphones mutes speaker output.
- Volume Control: Main volume knob for adjusting overall output level.
- Source Input Selector (PHONO, AUX, BT, OPT, COAX, PC-USB): Buttons to select the desired audio input source.
Rear Panel

- Bluetooth Antenna: For wireless Bluetooth connectivity.
- Ground Terminal (GND): For connecting the ground wire of a turntable.
- Noiseless Cooling Fan: Helps maintain optimal operating temperature.
- AC110V or AC220V Voltage Selector Switch: Selects the appropriate input voltage (110V or 220V).
- Digital Optical Input (OPT): For connecting digital audio sources via optical cable.
- Active Subwoofer Output (SW OUT): Mono RCA output for connecting an active subwoofer.
- PC-USB Input: For connecting a computer directly via USB.
- Digital Coaxial Input (COAX): For connecting digital audio sources via coaxial cable.
- Line Level AUX RCA Input: For connecting analog audio sources (e.g., CD player, streamer).
- Phono RCA Input: For connecting a turntable with a phono output signal.
- Passive Speaker Output: Binding posts for connecting passive speakers.
- AC Power Input: For connecting the AC power cable.
Remote Control

The remote control provides convenient access to input selection, volume adjustment, and track transport controls for compatible sources.
Setup Instructions
Connecting the Power Cable
Before connecting the main power cable, make sure the voltage selector switch on the rear panel is set according to your local voltage (110V or 220V). Incorrect setting of the voltage selector switch could cause damage to the amplifier.

Connecting Speakers
The amplifier can power speakers with a minimum impedance of 4 ohms. Use quality banana conductor speaker cables to connect your speakers to the binding posts on the rear of the unit. Ensure correct polarity (red to red, black to black) for both left and right channels. Do not connect the two terminals together or to ground. The JTA50 is designed to operate in bridge mode and attempting to do so may damage the amplifier.

Connecting a Turntable
- Ensure that your turntable is set to output a phono signal. Many modern turntables have the ability to output either a line level signal or a phono signal. If your turntable outputs a line level signal, please connect it to the AUX Input on the JTA50.
- Remove the covers from the PHONO RCA plugs and connect the turntable to the phono input.
- Connect the ground wire of the turntable to the GND terminal on the rear of the amplifier.

Connecting Other Sources (CD Player, PC, etc.)
The JTA50 is capable of receiving audio directly from a wide variety of sources. Using high quality cables will ensure the best possible transmission from your connected devices.
- PC-USB Input: Connect your computer directly to the PC-USB input using a USB cable.
- Digital Optical Input (OPT): Connect digital audio sources like TVs or CD players using an optical cable.
- Digital Coaxial Input (COAX): Connect digital audio sources using a coaxial cable.
- Line Level (AUX) Input: Connect analog audio sources (e.g., CD player, network streamer) using RCA cables.

Connecting Bluetooth
Connect the Bluetooth antenna to the BT ANTENNA port on the rear of the JTA50. Pair your mobile device or computer with the amplifier via Bluetooth settings.
Connecting a Subwoofer
If you want to enhance the bass, you can add an active subwoofer using the SW OUT output on the JTA50. The signal from this output is full range, allowing the subwoofer to handle its own crossover. Use a single RCA cable to connect the SW OUT to your active subwoofer.
Connecting Headphones
Headphones can be used with the 1/4" TRS connection on the front of the JTA50. Plugging in headphones here will mute the audio output to the speakers. To avoid damage to headphones or your hearing, make sure to turn down the volume before plugging in or unplugging headphones.

Operating Instructions
Power On/Off
Press the Power Switch on the front panel to turn the device on or off. The Power Indicator will illuminate when the unit is turned on.
Input Selection
Press the corresponding input button (PHONO, AUX, BT, OPT, COAX, PC-USB) on the front panel or remote control to select your desired audio source.
Volume Control
Adjust the main volume knob on the front panel or use the VOL+ / VOL- buttons on the remote control to set the desired listening level.
Tone Controls
Use the BASS and TREBLE knobs on the front panel to adjust the tone. The Bass control affects frequencies around 200 Hz, and the Treble control affects frequencies around 4,000 Hz.
Headphone Use
Plug your 1/4" TRS headphones into the Headphone Output jack on the front panel. This will automatically mute the speaker output. Remember to lower the volume before connecting or disconnecting headphones.
Remote Control Functions
The remote control allows you to manage various functions from a distance:
- Input Selection: Dedicated buttons for PHONO, AUX, USB, COAX, OPT, BT.
- Volume Control: VOL+ and VOL- buttons.
- Mute: MUTE button to silence audio.
- Playback Controls: Play/Pause, Previous Track, Next Track (for compatible USB/Bluetooth sources).
- Repeat: REP button.
- Stop: STOP button.

Video demonstrating the JTA50 amplifier's features, connections, and remote control operation.
User Tips
- The VU meters on the front panel will stop flickering when headphones are plugged in. This is normal behavior and not a defect, as the amplifier is designed to recognize only one output path at a time (speakers or headphones).
- For optimal sound, consider pairing the JTA50 with passive speakers having an impedance of 4Ω~8Ω and a rated power of 20W~60W.
- If you find the bass weak for certain music styles, connecting an active subwoofer to the SW OUT port can significantly enhance the low-frequency response.
- Ensure the vacuum tubes are tightly inserted upon arrival, as they might shift during transportation.
Troubleshooting
- No Power / Amplifier Not Working: The amplifier might suffer some issues during transportation. Please check if the tubes are in perfect condition and make sure they are tightly inserted.
- No Sound from Speakers when Headphones are Plugged In: This is normal behavior. Plugging in headphones automatically mutes the speaker output.
- No Sound from Turntable: Ensure your turntable is set to output a phono signal and is connected to the PHONO input. If your turntable outputs a line-level signal, connect it to the AUX input instead. Also, ensure the ground wire is properly connected to the GND terminal.
- Remote Control Not Responding: If you cannot find the remote or it's not working, try replacing the batteries. If issues persist, contact Juson Audio customer support.
- Weak Bass: Consider connecting an active subwoofer to the SW OUT port to enhance low-frequency response.
Specifications

| Feature | Specification |
|---|---|
| Power Output | 65WPC RMS @ 4 ohms (40WPC RMS @ 8 ohms) |
| THD | <0.5% |
| Minimum Speaker Impedance | 4 ohms |
| Frequency Response | 20-20,000Hz |
| Channel Separation | 50dB |
| Headphone Output | 35mW@32ohms |
| SNR | > 80 dB |
| Sub Output | Preout for active subwoofer (full range) |
| Bluetooth Version | 5.0 (supports SBC and AAC codecs) |
| Media Playback File Support (USB) | FLAC, WAV, APE, WMA, MP3 |
| Digital Audio DAC Sample Rate | Up to 16-bit/48kHz |
| Preamplifier Tubes | 2*6J9 + 2*10DX8 (or 2*6F1 + 2*WY-2 in some regions) |
| Transistors | Toshiba A1941 x 2, Toshiba C5198 x 2 |
| Inputs | Optical, Coaxial, Bluetooth 5.0, 2x Stereo RCA, USB |
| Outputs | Speaker, Subwoofer, Headphone |
| Power Requirements | 110/220 VAC, 50/60 Hz Standard IEC Connection |
| Dimensions (W x D x H) | 271 x 286 x 166 mm (10.7 x 11.3 x 6.5 inches) |
| Weight | 9.0 kg (18.4 lbs) |
| Certification | CE, FCC, RoHS |
Maintenance
To ensure the longevity and optimal performance of your Juson Audio JTA50 amplifier, please follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the amplifier. Avoid using liquid cleaners or solvents, as they may damage the finish.
- Ventilation: Ensure adequate ventilation around the amplifier. Do not block the cooling fan on the rear panel or any ventilation openings.
- Tube Care: The vacuum tubes are delicate. Avoid touching them directly when hot. If replacement is needed, ensure the amplifier is powered off and cooled down before handling.
- Environmental Conditions: Operate the amplifier in a dry environment, away from direct sunlight, heat sources, and excessive dust or moisture.
Warranty and Support
The JTA50 is warranted to be free of all material and workmanship defects for 2 YEARS from the date of purchase from an authorized Juson Audio dealer. This warranty is for the original owner and is not transferable. Responsibility is limited to repair or replacement of any part or product proving defective in material or workmanship. Any repairs must be performed by Juson Audio or an authorized Juson Audio facility. The cost of returning the product for repair is the responsibility of the owner. All shipping costs except return shipping for repairing a defective part or product under the warranty shall be borne by Juson Audio. Juson Audio reserves the right to replace any defective product with a factory reconditioned unit.
For vacuum tube parts, a 3-month warranty applies.
After the warranty period has expired, Juson Audio teams are available to offer technical support online to help you repair the product.
Please feel free to contact us for any technical support inquiries.
Frequently Asked Questions (FAQ)
- Q: Can a PS5 console be connected through the USB audio connector?
- A: Yes, the JTA50 features a PC-USB input, which can function as a DAC (Digital-to-Analog Converter) for devices like a PS5 console, provided the PS5 supports USB audio output to external DACs.
- Q: Can I connect a CD player and a record player at the same time?
- A: Yes, the amplifier has multiple input options including PHONO (for record players) and AUX, Optical, or Coaxial (for CD players). You can connect both simultaneously and switch between them using the input selector buttons on the front panel or remote control.
- Q: What kind of speakers do you recommend for this amplifier?
- A: We recommend passive speakers with an impedance of 4Ω~8Ω and a rated power of 20W~60W for the JTA50. This combination typically provides a balanced and warm sound experience.