AOBEL Canon EOS 550D, 600D, 650D, 700D, 1100D, 1200D, 1300D, 1500D, 2000D

Contents

Instruction Manual

AOBEL USB/HDMI/DC IN/VIDEO OUT Rubber Door Bottom Cover

For Canon EOS 550D, 600D, 650D, 700D, 1100D, 1200D, 1300D, 1500D, 2000D Digital Cameras

Product Overview

This manual provides essential information for the proper installation and maintenance of your AOBEL replacement rubber door bottom cover for Canon EOS digital cameras. Please read this manual carefully before use to ensure standard and correct operation.

Package Contents

  • Repair Part x 1 (USB/HDMI/DC IN/VIDEO OUT Rubber Door Bottom Cover)

Compatible Models

This replacement rubber door bottom cover is designed for the following Canon EOS digital camera models:

  • Canon EOS 550D
  • Canon EOS 600D
  • Canon EOS 650D
  • Canon EOS 700D
  • Canon EOS 1100D
  • Canon EOS 1200D
  • Canon EOS 1300D
  • Canon EOS 1500D
  • Canon EOS 2000D
Overview of various rubber door covers for Canon EOS 550D, 600D, 650D/700D, 1100D, 1200D, and 1300D/1500D/2000D models, showing front and back views.
Figure 1: Various rubber door covers for different Canon EOS models, showing front and back views.

Product Specifications

AttributeValue
Product NameDigital Camera Repair Parts
Brand NameAOBEL
Photography Accessories TypeCamera Protective Case
MaterialABS Plastic + FPC + Metal
ElectricNo
High-concerned chemicalNone
PackageYes
OriginMainland China

Installation Instructions

This product is specially designed for camera maintenance. Professional installation skills are required to ensure proper fitting. If you are not confident in your ability to perform the installation, it is recommended to seek assistance from a qualified technician.

  1. Identify the Correct Part: Refer to Figure 1 to ensure you have the correct rubber door cover for your specific Canon EOS model.
  2. Prepare the Camera: Ensure your camera is powered off and the battery is removed.
  3. Remove the Old Cover: Carefully open the existing rubber door cover. Depending on your camera model, you may need to gently pry it out or remove a small screw that secures it.
  4. Install the New Cover: Align the new rubber door cover with the port opening on your camera. Gently press the hinge into place. Ensure all clips and tabs are properly seated within the camera casing.
  5. Secure the Cover: If your model requires a screw, re-insert and tighten it. Ensure the cover closes flush and securely protects the ports.
Hands demonstrating how to open the rubber port cover on a Canon EOS camera, revealing the internal structure.
Figure 2: Opening the camera's port cover to access the installation area.
Close-up of a Canon EOS camera with the 550D rubber door cover installed, showing the MIC, A/V OUT DIGITAL, and HDMI ports.
Figure 3: Example of a properly installed 550D rubber door cover, showing port labels.
Side view of a Canon EOS camera with the 550D rubber door cover installed, showing the texture of the camera body and the flush fit of the cover.
Figure 4: Side view of the installed 550D rubber door cover, demonstrating a flush fit.

Safety Warnings

WARNING:

  • Do not ingest this product.
  • Keep it away from water, fire, and high-temperature environments.
  • Do not leave the product in direct sunlight or humid environments for extended periods.
  • Keep this product out of the reach of children.

Maintenance & Care

  • Clean the product with a soft, dry cloth.
  • Do not use corrosive cleaning agents.
  • Store the product in a cool and dry place.

Troubleshooting

  • Difficulty Inserting: If the part is difficult to insert, ensure it is correctly aligned with the camera's port opening. Do not force the part, as this may cause damage. Verify you have the correct model-specific part.
  • Poor Fit: If the part does not fit snugly or leaves gaps, double-check that it is designed for your specific camera model. Some users have noted that the fit can be tight, requiring careful alignment.
  • Hinge Issues: If the hinge mechanism is not engaging correctly, ensure it is fully seated. Applying gentle, even pressure can help.

User Tips

  • For models like the Canon 1100D, you might need to remove a screw to install the cover.
  • When pressing the hinge into place, proceed gently to avoid damage.
  • If the original screws are difficult to remove, some users have carefully cut the old rubber insert to facilitate removal and replacement.

Frequently Asked Questions (FAQ)

Q: Do you have this part for Canon SX30is?
A: This specific rubber door bottom cover is designed for Canon EOS 550D, 600D, 650D, 700D, 1100D, 1200D, 1300D, 1500D, and 2000D models. We do not currently offer a compatible part for the Canon SX30is.

Certification & Compliance

This product complies with the following EU standards:

  • CE
  • RoHS
  • LVD
  • EMC

EU Authorized Representative: SUCCESS COURIER SL
RIO TORMES STREET, NO.1, 1st Floor, Right, Office 3, Fuenlabrada, Madrid, 28947 Spain

Warranty & After-sales Service

For any warranty or after-sales service issues, please contact our customer service team directly.

You can also refer to the official user manual PDF for additional information: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.