DIXSG P47

Contents

P47 Bluetooth 5.0 Wireless Headphones User Manual

Model: P47 | Brand: DIXSG

Introduction

Thank you for choosing the P47 Bluetooth 5.0 Wireless Headphones. These headphones offer a versatile audio experience with wireless Bluetooth connectivity, a foldable design for portability, HIFI stereo bass, and a built-in microphone for hands-free calls. They are designed for use with a wide range of devices, including smartphones, tablets, PCs, and gaming consoles.

Safety Information

  • Do not expose the headphones to extreme temperatures, humidity, or corrosive environments.
  • Avoid dropping or subjecting the headphones to strong impacts.
  • Do not disassemble or modify the headphones. This will void the warranty.
  • Keep the headphones away from water and other liquids.
  • Clean the headphones with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Listen at moderate volume levels to prevent hearing damage.

Package Contents

  • P47 Bluetooth Wireless Headphones
  • Standard USB Charging Cable
  • 3.5mm Audio Cable (AUX)

Product Overview

Familiarize yourself with the headphone's components and controls:

P47 Headphone Controls Diagram

Diagram showing the control buttons on the headphone ear cup.

  • Power Button (⏻): On/Off, Call Answer/End/Redial.
  • Play/Pause Button (⏸️/⏸️): Play/Pause music.
  • Volume Down / Previous Track Button (⏪ / -): Short press for volume down, long press for previous track.
  • Volume Up / Next Track Button (⏩ / +): Short press for volume up, long press for next track.
  • Mode Button (M): Switch between Wireless (Bluetooth), MP3 (TF card), and FM Radio modes.
  • Microphone: For hands-free calls.
  • LED Indicator Light: Shows status (pairing, playing, charging).
  • USB Charging Port: For charging the headphones.
  • 3.5mm Audio Jack: For wired connection.

Specifications

Feature Specification
Bluetooth Version 5.0
Wireless Distance Up to 10 meters
Impedance Range Up to 32 Ω
Vocalism Principle Dynamic
Active Noise-Cancellation No
Charging Input DC5V (Standard USB)
Charging Time Approximately 2 hours
Call Duration Approximately 6 hours
Standby Time Approximately 15 hours
FM Frequency 87.5-108MHz
Frequency Response 50HZ-20KHz
Signal-to-Noise Ratio (SNR) 88dB
Output Power 35mW
Material Plastic

Setup

1. Charging the Headphones

  1. Connect the provided USB charging cable to the headphone's charging port.
  2. Connect the other end of the USB cable to a DC5V power source (e.g., computer USB port, USB wall adapter).
  3. The LED indicator will show a steady red light during charging.
  4. Once fully charged (approximately 2 hours), the red LED light will turn off.

2. Powering On/Off

  • To Power On: Long press the Power button (⏻) for three seconds.
  • To Power Off: Long press the Power button (⏻) for three seconds.

3. Bluetooth Pairing (Wireless Mode)

  1. Ensure the headphones are powered off.
  2. Long press the Power button (⏻) for three seconds to turn them on. The LED indicator will flash blue, indicating pairing mode.
  3. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
  4. Select "P47" from the list of found devices.
  5. Once successfully paired, the blue LED light will flash slowly.
  6. To connect to another device, disconnect from the current device and repeat the pairing process.

4. Wired Connection (AUX)

  1. Insert the 3.5mm audio cable into the headphone's audio jack.
  2. Connect the other end of the audio cable to your device's 3.5mm audio output.
  3. The headphones will automatically switch to AUX LINE IN mode and function as ordinary wired headphones. Buttons may not function in this mode, and audio control will be primarily from the connected device.

Operating Instructions

1. Call Functions (in Wireless Mode)

  • Answer Call: Short press the Power button (⏻).
  • Refuse Call: Long press the Power button (⏻).
  • Redial Last Number: Continuously push the Power button (⏻) two times.

2. Music Playback (in Wireless Mode)

  • Play/Pause: Short press the Play/Pause button (⏸️/⏸️).
  • Next Song: Long press the Volume Up / Next Track button (⏩ / +).
  • Previous Song: Long press the Volume Down / Previous Track button (⏪ / -).

3. Volume Control

  • Increase Volume: Short press the Volume Up / Next Track button (⏩ / +).
  • Decrease Volume: Short press the Volume Down / Previous Track button (⏪ / -).

4. Mode Switching

Press the Mode button (M) to cycle through the available modes:

  • Wireless Mode (Bluetooth): Connects to your Bluetooth-enabled device.
  • MP3 Mode: Plays audio from a TF (MicroSD) card inserted into the headphone's card slot (if available).
  • FM Radio Mode: Allows you to listen to FM radio stations. The blue LED will flash during radio search.

Maintenance

  • Store the headphones in a cool, dry place when not in use.
  • Avoid prolonged exposure to direct sunlight or high temperatures.
  • Clean the ear cushions and headband regularly with a soft, damp cloth.
  • Do not use alcohol, benzene, or other chemical solutions for cleaning.
  • Charge the headphones regularly, even if not in frequent use, to maintain battery health.

Troubleshooting

  • Headphones won't turn on: Ensure the headphones are charged. Connect to a power source and try again.
  • Cannot pair with device:
    • Make sure Bluetooth is enabled on your device.
    • Ensure the headphones are in pairing mode (blue LED flashing rapidly).
    • Move the headphones closer to your device.
    • Forget the device from your phone's Bluetooth list and try pairing again.
  • No sound:
    • Check the volume level on both the headphones and your connected device.
    • Ensure the headphones are correctly paired or the audio cable is fully inserted.
    • Try switching modes (Bluetooth, MP3, FM) to see if audio works in another mode.
  • Poor sound quality:
    • Ensure there are no obstructions between the headphones and your Bluetooth device.
    • Move away from other wireless devices that might cause interference.
    • Check the audio source quality.
  • Microphone not working in wired mode: The microphone function is primarily for Bluetooth mode. In wired mode, the microphone on the headphones may not be active; your device's built-in microphone might be used instead.

User Tips

  • These headphones are often noted for their good sound quality and volume, especially considering their price point.
  • The setup and connection process is generally straightforward and easy.
  • Battery life is reported to be good, offering several hours of use on a single charge.
  • The foldable design makes them convenient for travel and storage.
  • While suitable for many, some users find the headphones to be on the smaller side, which might affect comfort for adults with larger heads or ears. They are often a good fit for children.
  • The headphones are compatible with a wide range of Bluetooth-enabled devices, including Android phones, iPhones, and devices with a 3.5mm audio jack.
  • The FM radio function is a useful added feature for standalone listening.

Warranty and Support

For warranty information and customer support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.

A detailed user manual in PDF format may be available for download. Please check the product page or contact customer support for access to the PDF manual: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.