1. Introduction
Thank you for choosing the Wallpad Glass Impulse Momentary Wall Light Switch. This modern and elegant switch features a durable glass panel, an intuitive push-button mechanism, and a soft LED indicator for enhanced usability and aesthetics. This manual provides essential information for safe installation, operation, and maintenance of your new light switch.
2. Safety Information
- Always turn off the main power supply at the circuit breaker before performing any electrical work.
- Installation should be performed by a qualified electrician or a competent person familiar with electrical wiring.
- Do not install in wet or damp locations.
- Ensure all wire connections are secure and properly insulated.
- Do not exceed the specified current rating of 16A.
3. Package Contents
- Wallpad Glass Impulse Momentary Wall Light Switch
- Mounting Screws (typically included)
- User Manual (this document)
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Wallpad |
| Model Number | Switch with LED Indicator |
| Switch Type | Push Button Switch |
| Current Rating | 16A |
| Material | Copper (internal components) |
| Features | Push Button Switch, LED Indicator |
| Certification | CCC, CE, VDE |
| Warranty | 12 Years |
| Is Smart Device | No |
| Origin | Mainland China |
5. Setup and Installation
5.1 Mounting Requirements
The Wallpad switch is designed for installation with an 86 Type Square Box. Round electrical boxes are NOT compatible with this product. Please ensure you have the correct type of wall box before installation.

Image: Back Size & Mounting. The diagram shows the switch dimensions (86mm width, 90mm height, 60mm mounting screw distance) and the required 86 Type Square Box. A red 'X' indicates that round boxes are not suitable.
5.2 Wiring Diagrams
Always ensure the main power supply is OFF before proceeding with any wiring. Follow the appropriate diagram for your installation type.

Image: Wiring Diagrams. This image illustrates three common wiring configurations.
- 1 Way Wiring: This configuration is for controlling a light from a single switch. Connect the Live Line (L) to the 'L' terminal on the switch. Connect the Live Line Out (to the lamp) to the 'L1' terminal. The Neutral Line (N) connects directly to the lamp.
- 2 Way Wiring: This configuration allows controlling a single light from two different switch locations (e.g., top and bottom of stairs). Connect the Live Line (L) to the 'L' terminal on both switches. Connect 'L1' from the first switch to 'L1' on the second switch. Connect 'L2' from the first switch to 'L2' on the second switch. The Lamp Line connects to the 'L1' terminal of the second switch. The Neutral Line (N) connects directly to the lamp.
- Intermediate Wiring: This configuration is used when you need to control a single light from three or more switch locations. It involves two 2-way switches at the ends and one or more intermediate switches in between. The intermediate switch connects the L1/L2 lines from the first 2-way switch to the L1/L2 lines of the subsequent switch in the circuit.
6. Operating Instructions
6.1 Basic Operation
The Wallpad switch operates as a simple push-button mechanism. Press the button to toggle the connected light ON or OFF.
6.2 LED Indicator
Your Wallpad switch features a soft LED indicator for convenience and aesthetic appeal.

Image: Big Soft LED Indicator. This image shows the LED indicator's behavior. When the light is OFF, the LED glows blue. When the light is ON, the LED is off or very dim.
7. Maintenance
7.1 Cleaning
To clean the glass panel of your Wallpad switch, use a soft, slightly damp cloth. Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the glass finish or the internal components.
7.2 Durability
The high-quality glass panel is designed to be scratch-resistant and will not fade over time, ensuring a lasting elegant appearance.

Image: No Scratch, Never Fade Glass. Illustrates the durability of the glass surface.
8. Troubleshooting
- Switch Not Fitting Flush: If the switch appears too deep or does not sit flush against the wall, consider using electrical box spacers (not included) to bring the switch plate forward slightly.
- Light Not Turning On/Off: Ensure the main power supply is ON. Double-check all wiring connections against the provided diagrams. Verify that the lamp itself is functional.
- LED Indicator Not Working: Confirm that the switch is correctly wired, especially the Live and Neutral connections if applicable to the LED circuit.
- Loose Connection: If the switch feels loose, ensure the mounting screws are tightened securely into the wall box.
9. User Tips
- Always confirm you have an 86 Type Square Box for installation; round boxes are not compatible.
- For a perfectly flush fit, especially if your wall box is shallow, consider purchasing and using switch spacers.
- The blue LED indicator provides a modern touch and makes it easy to locate the switch in the dark.
10. Warranty and Support
This Wallpad Glass Impulse Momentary Wall Light Switch is covered by a 12-year warranty from the date of purchase, covering manufacturing defects under normal use.
For further detailed instructions, technical support, or warranty claims, please refer to the official user manual PDF or contact Wallpad customer service. The PDF manual can be accessed here: Wallpad User Manual (PDF).