1. Introduction
Thank you for choosing the ONIKUMA X15 Pro Wired Gaming Headset. This manual provides detailed instructions for setting up, operating, and maintaining your headset to ensure the best possible gaming and audio experience. Please read this manual thoroughly before using the product.
Key Features:
- High-quality sound production unit for rich audio.
- Comfortable skin-type protein earmuffs for extended wear.
- Lightweight design with a self-adjusting head beam.
- High-sensitivity, detachable microphone for clear communication.
- Dynamic RGB lighting effects.
- Multi-platform compatibility.
2. Package Contents
Please check the box for the following items:
- ONIKUMA X15 Pro Gaming Headset
- Operating Instructions Manual
- 1-to-2 3.5mm Audio Splitter Cable (for PC with separate audio/mic jacks)
3. Product Overview
Familiarize yourself with the components of your ONIKUMA X15 Pro headset:
- Speaker Unit: High-quality 50mm drivers for immersive sound.
- Skin-type Protein Earmuffs: Comfortable and breathable ear cushions.
- Self-adjusting Head Beam: Flexible headband for a secure and comfortable fit.
- 3.5mm Audio Cable: Main audio connection for sound and microphone.
- Volume Control Button: Adjust audio output level.
- Microphone On-Off Button: Mute or unmute the microphone.
- 3.5mm CTIA Standard Interface: Universal audio jack (Left Channel - Right Channel - Ground - Microphone).
- USB Interface: Powers the LED RGB lighting.
- Single Hole Interface: The main 3.5mm jack for devices with a combined audio/mic port.
- One-to-Two Tieline (Splitter Cable): Used to split the 3.5mm audio/mic signal into separate headphone and microphone jacks for PCs.
Headset connections and included cables
Audio Technology:
Detailed view of the 50mm driver unit and its sound enhancement features
Microphone:
Detachable HD microphone with 360° adjustment and noise rejection
4. Setup Instructions
The ONIKUMA X15 Pro headset is designed for multi-platform compatibility. Ensure all connections are secure.
Multi-platform compatibility: PC, Mac, Mobile, Xbox, PS4, Switch
4.1. Connecting to PC
- For PCs with a single combined 3.5mm audio/mic jack: Plug the headset's 3.5mm jack directly into your PC's audio port.
- For PCs with separate 3.5mm audio and microphone jacks: Use the included 1-to-2 3.5mm splitter cable. Plug the headset's 3.5mm jack into the splitter, then plug the splitter's green jack into your PC's headphone port and the pink jack into your PC's microphone port.
- For RGB Lighting: Plug the headset's USB connector into an available USB port on your PC.
4.2. Connecting to Gaming Consoles (PS4, PS5, Xbox One, Xbox Series X/S, Nintendo Switch)
- Plug the headset's 3.5mm jack directly into the 3.5mm port on your console's controller.
- For RGB Lighting: Plug the headset's USB connector into an available USB port on your console or a USB power adapter. Note that USB cable length might limit placement.
4.3. Connecting to Mobile Devices (Smartphones, Tablets)
- Plug the headset's 3.5mm jack directly into your mobile device's 3.5mm audio port.
- For RGB Lighting: Plug the headset's USB connector into a USB power adapter or power bank.
5. Operating Instructions
5.1. Wearing the Headset
- The cable end or microphone is typically designed to be on the left side. Wear the headset with the cable/microphone on your left ear for optimal positioning.
- Adjust the head beam for a comfortable fit. The earmuffs are designed to fully enclose your ears.
5.2. Volume Control
- Use the volume control wheel located on the headset's earcup to adjust the audio output level.
- Ensure the headset volume is not at its minimum when you start, then adjust to your preferred level.
5.3. Microphone Usage
- The microphone is detachable and flexible. Position it close to your mouth for clear voice pickup.
- Use the microphone on-off button on the headset to mute or unmute your microphone.
- For PC Users: Ensure both the headset's microphone switch and your computer's microphone are enabled. You may need to adjust microphone settings in your operating system's Sound Control Panel (e.g., check