ZHAOKE TB-003

Contents

ZHAOKE TB-003 Semi Flush Mount Ceiling Light

User Instruction Manual

1. Safety Instructions

WARNING: To avoid electric shock, disconnect the power supply completely before installation and ensure no voltage is present.

  1. You must have a qualified electrician to assist you with installation.
  2. Be extremely cautious when connecting the luminaire to the power supply to avoid electric shock.
  3. Before starting any work, switch off or disconnect the mains power supply (230V, 100V, 110V, etc.).
  4. Check the course of the power lines before drilling to ensure you do not damage them.
  5. If the power cable is damaged, the product is unusable and should not be installed or operated.

For detailed safety information, please refer to the official user manual PDF: User Manual (PDF)

2. Product Overview

The ZHAOKE TB-003 is a vintage-style semi flush mount ceiling light designed for indoor use. It features an iron body with a painted finish and uses an E27 base for LED bulbs (bulbs not included).

Black Semi Flush Mount Lamp with E27 bulb

Figure 2.1: ZHAOKE TB-003 Semi Flush Mount Ceiling Light (Black)

Black Semi Flush Mount Lamp installed on a ceiling

Figure 2.2: Installed Black Semi Flush Mount Ceiling Light

White Semi Flush Mount Lamp installed on a ceiling

Figure 2.3: Installed White Semi Flush Mount Ceiling Light

3. Setup and Installation

3.1. Pre-Installation Checks

  • Ensure all components are present and undamaged.
  • Verify that the power supply matches the lamp's voltage requirements (90-260V AC).
  • Turn off the main power supply at the circuit breaker before beginning installation.

3.2. Installation Steps

The ZHAOKE TB-003 ceiling light is designed for surface-mounted assembly. Follow these general steps:

  1. Carefully unpack the light fixture and all components.
  2. Attach the mounting bracket to the ceiling junction box using appropriate screws (not always included). Ensure the bracket is securely fastened.
  3. Connect the electrical wires according to the wiring diagram provided below.
  4. Secure the lamp body to the mounting bracket.
  5. Install an E27 LED bulb (not included) into the lamp holder.
  6. Restore power and test the light.

3.3. Wiring Diagram

Refer to the diagram below for correct wiring connections. Always ensure power is off before handling electrical wires.

Exploded view and wiring diagram for ZHAOKE TB-003 ceiling light

Figure 3.1: Exploded view of the lamp components and wiring diagram.

  • Brown wire: Live wire (L)
  • Blue wire: Neutral wire (N)
  • Yellow-green wire: Earth wire (PE/Ground)

Ensure correct connection according to wire colors. All connections must be secure and properly insulated. Do not connect incorrectly.

VDE certification details for the lamp holder

Figure 3.2: VDE Certification for Lamp Holder Components

4. Operating Instructions

This ceiling light is designed for simple operation. Once properly installed and connected to the main power supply, it can be turned on and off using a standard wall switch.

  • Power On/Off: Use the wall switch connected to the light fixture to turn the light on or off.
  • Dimmability: This fixture is NOT dimmable. Do not use with dimmer switches, as this may damage the light or the dimmer.
  • Bulb Type: Uses one E27 base LED bulb. Ensure the bulb's wattage is appropriate for the fixture.

5. Maintenance

5.1. Cleaning

  • Always disconnect power before cleaning.
  • Wipe the fixture with a soft, dry cloth.
  • Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.

5.2. Bulb Replacement

  • Ensure the power is turned off at the circuit breaker before replacing the bulb.
  • Allow the old bulb to cool completely before touching it.
  • Unscrew the old E27 bulb and screw in a new E27 LED bulb.
  • Do not overtighten the bulb.

6. Troubleshooting

Problem Possible Cause Solution
Light does not turn on
  • No power to the fixture
  • Loose wiring connection
  • Faulty bulb
  • Check circuit breaker and wall switch.
  • Ensure all wiring connections are secure (power off first!).
  • Replace the bulb.
Light flickers
  • Loose bulb
  • Incorrect bulb type (e.g., dimmable bulb with non-dimmable fixture)
  • Loose wiring
  • Tighten the bulb.
  • Ensure an E27 LED bulb is used.
  • Check wiring connections (power off first!).

If problems persist, consult a qualified electrician.

7. Specifications

Feature Detail
Brand NameZHAOKE
Model NumberTB-003
Item TypeCeiling lights
Power SourceAC
Voltage90 - 260 V
Body MaterialIron
Light SourceLED bulbs (Bulbs not included)
Base TypeE27
StyleVintage
TechnicsPainted
Installation MethodAssembly
Install StyleSurface mounted
Number of light sources1
Lighting Area5-10 square meters
MaterialMetal
FinishIron
Is DimmableNo
Is Smart DeviceNo
High-concerned chemicalNone
Is Include PCBAN
ApplicationFoyer, Bathroom, Bed Room, Study, Kitchen, Dining Room
UseIndoor Lighting
OriginMainland China
CertificationCE

7.1. Dimensions

  • Lamp Width: 25 cm
  • Lamp Height: 10 cm
Dimensions of the black semi flush mount lamp (25cm width, 10cm height)

Figure 7.1: Product Dimensions (Black Version)

Dimensions of the brown semi flush mount lamp (25cm width, 10cm height)

Figure 7.2: Product Dimensions (Brown Version)

7.2. Package Dimensions

  • Length: 2 cm
  • Width: 2 cm
  • Height: 10 cm
  • Weight: 0.48 kg

8. Warranty and Support

This product comes with a 5-year warranty from the date of purchase.

For further assistance, troubleshooting, or warranty claims, please refer to the comprehensive user manual available in PDF format:

Download User Manual (PDF)

9. User Tips

  • Bulb Selection: Always use high-quality E27 LED bulbs for optimal energy efficiency and lifespan. Check the bulb's wattage to ensure it is suitable for the fixture.
  • Regular Cleaning: Dust the fixture regularly with a soft, dry cloth to maintain its appearance and light output.
  • Professional Installation: If you are unsure about electrical wiring, it is highly recommended to hire a qualified electrician for installation to ensure safety and proper function.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.