1. Product Features & Main Components
Product Features
- Lightweight in size, light in weight, high in efficiency, low in working noise, and reasonable in design.
- Adopting efficient SPWM Pulse Width Control Technology.
- Adopting multiple high-tech and intelligent driver chips.
- SMT Chip Mounting Technology, precise control, high reliability, and low failure rate.
- High efficiency conversion rate, strong load capacity, and wide application range.
- Multiple intelligent security protection with complete protection functions.
Main Components
Diagram illustrating the main components of the inverter: indicator light (green for normal, red for protection), universal shaped socket, independent switch, input terminal positive (red), efficient cooling fan, and input negative terminal (black).
- Indicator Light: Green for normal operation, Red for protection status.
- Universal Shaped Socket: For AC output.
- Independent Switch: Power ON/OFF.
- Input Terminal Positive (Red): Connects to the positive terminal of the DC power source.
- Input Negative Terminal (Black): Connects to the negative terminal of the DC power source.
- Efficient Cooling Fan: For heat dissipation.
Important Clause
All content in this document has been carefully proofread. If there is any printing or misunderstanding in the content, our company reserves the final right of interpretation. In case of product technology or upgrades, they will be included in the new version of the manual without prior notice; the appearance of the product is only based on one of the models as a reference. Different models have different appearance specifications and functions. Please refer to the actual product as the standard.
2. Setup
Requirements for the Usage Environment
Based on safety and performance considerations, the installation environment should meet the following conditions:
- Dry: Do not immerse in water or rain.
- Temperature Conditions: A cool place with a temperature between 0°C and 40°C.
- Space Conditions: Do not use the power inverter in a narrow space, do not cover the machine for use, and pay attention to good ventilation!
How to Connect
Attention: When directly connected to the battery for use, the general car battery is 12V. It is necessary to choose a battery with the same input voltage as the power inverter for use, and multiple batteries can be used in parallel.
Direct Battery Connection
Diagram showing direct connection from a 12V DC battery to the Power Inverter, providing 110V AC output. Ensure the battery voltage matches the inverter's input voltage.
Connection Method for Car Cigarette Lighters
Attention:
- Choose a power inverter equipped with a car-mounted cigarette lighter model to use this method.
- The cigarette lighter output can only carry electrical appliances with a load of less than 150W. If it exceeds 150W, please follow the direct battery connection method.
Diagram illustrating connection via a car cigarette lighter for low-power electrical appliances (less than 150W) like laptops or small fans.
Connection Method of Electric Motorcycle
Attention: Generally, the voltage of four batteries of an electric motorcycle is 48V, and that of five batteries is 60V. The specific voltage shall be subject to the voltage marked on the electric motorcycle, and then the inverter with the same voltage as the electric vehicle shall be selected for use.
Diagram showing connection from an electric motorcycle battery to the Power Inverter using a special connecting wire, providing 110V AC output.
3. Operating Instructions
- Place the inverter switch in the OFF position, then connect the inverter to the battery and ensure good contact.
- Confirm that the power of all electrical appliances is within the rated power range (50% of the peak power marked by the inverter), and that the peak power of inductive load electrical appliances does not exceed the peak power marked by the inverter. Then, plug the electrical plug into the 110V output socket of the inverter.
- Turn on the switch of the power inverter, and the green indicator light is on, indicating normal operation.
- The red indicator light on indicates that the inverter is turned off due to overvoltage, undervoltage, overload, and overheating.
- In many cases, due to the limited output of the vehicle cigarette lighter socket, the normal inverter alarms or shuts down. In this case, as long as the vehicle is started or the power consumption is reduced, normal operation can be restored.
The inverter can power a wide range of household appliances, including refrigerators, kettles, laptops, rice cookers, projectors, induction cookers, electric drills, televisions, air conditioners, freezers, and hair dryers.
Close-up of the inverter's LCD display, showing real-time DC input voltage, AC output voltage, frequency, and power consumption.
4. Maintenance
Matters Needing Attention
- When appliances like refrigerator compressors or motors start, they can draw high peak power. While the inverter can handle nominal peak power, some appliances might exceed its output rate, triggering overload protection. Turn off electrical switches first, then turn on the inverter, and then turn on appliances one by one, starting with the highest peak electrical appliance.
- During use, if the battery voltage drops (e.g., 12V battery to 10.4-11.0V), an alarm will sound. Turn off sensitive electrical appliances promptly. The inverter will stop outputting current if the voltage drops further (e.g., 9.7-10.3V), and the red indicator light will illuminate.
- Start the vehicle or charge the battery in a timely manner to prevent battery depletion, which can affect vehicle starting and battery life.
- Although the inverter has overvoltage protection, input voltages exceeding 16V (for a 12V system) can still damage the inverter.
- After continuous use, the inverter's surface temperature may rise to 60°C. Ensure smooth airflow and keep it away from objects susceptible to high temperature.
- This power inverter is prohibited for use by minors!
User Tips
- Always ensure a quality connection by checking and tightening the input terminals.
- Consider replacing the output socket if it does not meet your specific needs or for improved durability.
- For optimal performance and convenience, some users find adding a remote control beneficial.
- Be aware of the inverter's idle power consumption. For example, a 12V 4000W 50Hz model might consume around 1.25A without load.
- If using with LiFePO4 batteries, ensure you have a Battery Management System (BMS) in place, as the inverter's cutoff voltage (e.g., 18V) might be critical for battery health.
- If the inverter frequently alarms or shuts down after a short period (e.g., 20 minutes), it might be due to overload or overheating. Reduce the load, ensure proper ventilation, and allow it to cool down.
- When connecting to a car battery, be mindful that continuous use for appliances like refrigerators might drain the car battery quickly.
- The inverter is designed for pure sine wave output, making it suitable for sensitive electronics and appliances like pellet boilers or refrigerators.
5. Troubleshooting
Refer to the table below for common problems and their resolution methods.
| Abnormal Phenomenon | Reason | Resolution Method |
|---|---|---|
| The indicator light is not on, and the electrical appliance is not working. | The malfunction is caused by the battery. | Check if the output voltage of the battery is consistent with the voltage marked on the machine, and replace it according to the specific situation. |
| The indicator light is not on, and the electrical appliance is not working. | Reverse connection of positive and negative poles. | Check the battery connection. The power inverter may be damaged and may need to be replaced or returned for warranty. |
| The indicator light is not on, and the electrical appliance is not working. | Poor contact at the wiring. | Check the connecting wires and connections, and tighten the wiring terminals. |
| The indicator light is red, and the electrical appliance is not working. | The power of the electrical appliance exceeds the continuous power of the power inverter, causing overload shutdown. | Use electrical appliances with a power lower than the continuous power of the power inverter. |
| The indicator light is red, and the electrical appliance is not working. | The power of the electrical appliance is less than the continuous power of the power inverter, but the peak power is too high. | The peak power of the electrical appliances used should be within the peak power range of the power inverter. |
| The indicator light is red, and the electrical appliance is not working. | Battery discharged (alarm). | Charging or replacing the battery. |
| The indicator light is red, and the electrical appliance is not working. | Poor ventilation, causing overheating shutdown. | Turn off the machine, cool down for 15 minutes, remove items around the fan and converter, place the inverter in a cool place, reduce the use of electrical appliances as required, and restart. |
| Detected that the output voltage of the power inverter is too low. | Input voltage too high. | Check the working status of the charging system. |
| Detected that the output voltage of the power inverter is too low. | The measured output voltage of voltmeter is too low. | The output data of the correction wave inverter should be measured using a "true RMS multimeter" to obtain accurate data. |
| The power inverter emits a buzzing alarm sound. | Undervoltage or over temperature protection. | Shorten or use thicker wires to connect the battery, lower the temperature of the machine, improve ventilation conditions around the machine, place the machine in a cool place, and reduce the use of electrical appliances as required. |
| The power inverter can only be used for low-power appliances. | When current passes through a wire, the voltage decays. | Reduce the length of the wire and use thicker wires. |
| The power inverter can only be used for low-power appliances. | Electrical power consumption is greater than the rated power of the power inverter. | Using a larger capacity battery. |
| Battery usage time is too short. | Poor or damaged battery health. | Replacing the battery. |
| Battery usage time is too short. | The electricity stored after being fully charged is still insufficient. | The charger cannot fully charge the appliance, replace it with a better intelligent charger. |
| Battery usage time is too short. | Current decays as it passes through a wire. | Reduce the length of the wire and use thicker wires. |
6. Specifications
Main Technical Parameters
- Output Voltage: 110V
- Current Frequency: 50Hz, 60Hz (depending on model)
- Current Waveform: Corrected Sine Wave or Pure Sine Wave
- Input Voltage: 10-15V (for 12V models), 22-30V (for 24V models), 40-60V (for 48V models), 60-80V (for 60V models)
- Built-in Fuse: 10A, 15A, 20A, 40A, 70A, 120A, 240A (varies by model)
- Under Voltage Alarm: 10.4-11.0V (12V), 20.5-22V (24V), 42-45V (48V), 54-57V (60V)
- Low Pressure Shutdown: 9.7-10.3V (12V), 19.4-20.6V (24V), 39-42V (48V), 48-52V (60V)
- Overpressure Shutdown: 14.5-15.5V (12V), 29-31V (24V), 58-62V (48V), 74-80V (60V)
- No-load Energy Efficiency Data: No-load Current (<0.3A)
- Conversion Rate: > 90%
Product Properties
- Brand Name: CHANTOWER
- Model Number: Pure Sine Wave Inverter 1000W, 1600W, 2200W, 3000W, 4000W, 5000W
- Output Power: >1000KW (referring to peak power for some models)
- Type: AC / DC Inverters
- Output Type: Single
- Size: 28*7*15cm
- Weight: 1.9 kg
- Origin: CN(Origin)
- Certification: CE
- Customizable: Yes
Package Dimensions
- Length: 27 cm
- Width: 19 cm
- Height: 7 cm
- Weight: 0.815 kg
7. Warranty and Support
Warranty Terms
To ensure the after-sales service of the product is intact and better, customers must strictly follow the instructions when receiving the product. This product has a three-year warranty!
- Product Exchange Application: The accessories must be complete and not affect secondary sales. (Missing relevant accessories will be deducted based on the factory price).
- Product Warranty Application: If the machine encounters quality problems without opening or modifying the original packaging, it will be repaired, replaced, or sent back to the manufacturer for free repair. No charge for repair if the product encounters quality problems due to unauthorized opening or modification; it will be paid maintenance.
- If the machine casing is too dirty or old and used in harsh environments, resulting in product damage, it will be paid maintenance.
- For high-power machine casings that are severely scratched, dirty, or old, they should be returned to the factory for repair. After being repaired within the warranty period, the machine will be returned to the customer in its original condition and will be repaired for free. For machines that have been modified or unpacked without permission, any malfunctions will be paid maintenance. Please contact customer service for specific costs.
- After receiving the relevant fees, we will promptly handle the after-sales service and deliver the product to the customer by express delivery.
Please contact customer service to obtain the return address and phone number for returns and exchanges.
A detailed user manual is available in PDF format for download: CHANTOWER Pure Sine Wave Inverter User Manual (PDF)
8. Product Overview Video
Watch this video for a visual overview of the CHANTOWER Pure Sine Wave Inverter.
Product overview video demonstrating the features and appearance of the inverter.