RETEVIS RT22/RT622

Contents

RETEVIS RT22/RT622 Two-Way Radio User Manual

Models: RT22 (FRS) / RT622 (PMR446)

Instant Communication | Efficient Service

1. Introduction

This manual provides essential instructions for the safe and efficient operation of your RETEVIS RT22 (FRS) or RT622 (PMR446) two-way radio. Please read this manual thoroughly before use to ensure proper functionality and to understand all safety guidelines.

Two RETEVIS RT22/RT622 two-way radios
Figure 1.1: RETEVIS RT22/RT622 Two-Way Radios

The RT22/RT622 radios are designed for reliable communication with features like compact size, long battery life, and strong signal penetration, making them suitable for various applications such as outdoor activities, cafes, and general business use.

Comparison of mini body with short antenna versus big body with long antenna, highlighting compact design
Figure 1.2: Compact & Lightweight Design with Integrated Short Antenna

2. Safety Warnings

Important Safety Information:

Before using this two-way radio, please read this manual which contains important operating instructions for safe usage, RF Energy Awareness, control information, and operational instructions for compliance with RF Energy Exposure limits in applicable national and international standards. Also, read the operational instructions for safe use.

3. Setup

3.1. Unpacking and Standard Accessories

Carefully unpack your radio and check that all standard accessories are included:

  • Radio Body (x2)
  • Battery (x2)
  • Belt Clip (x2)
  • Charging Cable (x2)
  • User Manual (x1)
  • US Adapter (x1)
Contents of Package B for FRS RT22 version, including two radios, two batteries, two belt clips, two charging cables, one manual, and one US adapter.
Figure 3.1: Package Contents (FRS RT22 Version)

3.2. Battery Installation and Charging

The battery is not charged at the factory. Please charge the battery before initial use or after long-term storage.

  1. **Install Battery**: Align the battery with the battery compartment on the back of the radio and push it into place until it clicks.
  2. **Charge Battery**: Connect the Mini USB charging cable to the radio's USB port and then to a power source using the provided US adapter. The charger light will indicate charging status.
  3. **Initial Conditioning**: Repeat charging and discharging the battery 2 or 3 times to allow it to reach its maximum capacity.
Diagram showing the radio being charged via Mini USB, with battery capacity and life details.
Figure 3.2: Battery Life and Charging Information

Charging Time: Approximately 3-4 hours.

Battery Life: 8-12 hours working time, 72 hours standby time.

3.3. Attaching and Removing Accessories

The radio comes with a detachable belt clip for easy carrying. Optional accessories like acoustic tube headsets, programming cables, speaker microphones, and throat mics can be connected via the MIC/Speaker Port.

Two-way radios in use by hikers, highlighting 500-1000m talk range and 400,000 m² coverage.
Figure 3.3: RT22/RT622 Two-Way Radios in Use

4. Operating Instructions

4.1. Controls Overview

Diagram of the RT22/RT622 radio showing antenna, power/voice volume knob, charger light, signal light, speaker, microphone, PTT key, channel selector plus/reduce, monitor, lock key, MIC/speaker port, USB plug, and charger connector.
Figure 4.1: Radio Controls and Ports
  • Power/Voice Volume Knob: Turn clockwise to power on and increase volume; turn counter-clockwise to decrease volume and power off.
  • Channel Selector (+/-): Use to select one of the 16 available channels.
  • PTT (Push-to-Talk) Key: Press and hold to transmit, release to receive.
  • Monitor Key: Long press to activate the monitor function. The signal indicator will turn green.
  • MIC/Speaker Port: For connecting external audio accessories.
  • USB Plug: For charging the radio.

4.2. Basic Operation

  1. Power On: Turn the Power/Voice Volume knob clockwise until you hear a click and the radio announces the current channel.
  2. Select Channel: Use the Channel Selector buttons to choose your desired communication channel.
  3. Transmit: Press and hold the PTT key, speak clearly into the microphone, then release the PTT key to listen for a response.

4.3. Advanced Functions

  • VOX Function (Hands-free Operation): VOX allows voice-activated transmission without pressing the PTT key. To activate/deactivate: Switch to channel 7, then turn off the radio. Press the 'CH+' key while turning on the radio. You will hear a voice prompt "VOX ON" or "VOX OFF".
  • QT and DQT (Squelch): This function helps to avoid irrelevant calls on a certain channel. Users can only receive calls on corresponding channels with the same QT/DQT settings.
  • Time-out-timer (TOT): Prevents a single user from occupying a channel for too long. If transmission exceeds 10 seconds, the radio will stop transmitting and sound an alarm. Release the PTT switch to stop the alarm and return to standby.
Video 4.1: Product demonstration including VOX handsfree operation, Mini USB charging, anti-fall test, and call range test.

5. Maintenance

5.1. Battery Care

  • Always use approved batteries and chargers.
  • If the battery consumes power quickly after normal charging, it may be exhausted and require replacement. Contact your dealer for a new approved battery.
  • Avoid exposing the battery to extreme temperatures.

5.2. General Cleaning

  • Clean the radio's exterior with a soft, damp cloth. Do not use harsh chemicals or solvents.
  • Ensure all ports are free from dust and debris.

6. Troubleshooting

ProblemPossible CauseSolution
Radio does not power onLow or depleted batteryCharge the battery fully.
Cannot transmit or receiveIncorrect channel selectedEnsure all radios are on the same channel.
Poor audio quality or limited rangeObstructions (buildings, terrain), distance, low batteryMove to an open area, reduce distance, ensure battery is charged.
"Please Charge" tone soundsLow battery warningRecharge or replace the battery.

7. Specifications

General
Operating FrequencyPMR446 (RT622) or 462MHz (RT22 FRS)
Output Power (W)0.5W (PMR) / 2W (FRS)
Channels16
Modulation TypeFM(F3E)
AntennaIntegrated Antenna
Antenna Gain1.8dBi
Bandwidth12.5KHz/25KHz
Power SourceDC3.7V
Dimensions5.32x2.16x0.84 inches (13.5x5.5x2.14 cm)
Weight3.99oz (113g)/pc
MaterialABS
Battery Capacity1000mAh
Waterproof / Water-ResistantNo
CertificationCE, FCC, RoHS
Transmit
Maximum Deviation≤±5KHz
Residual Radiation<60dB
Current≤1000mA
Receiver
Sensitivity<0.16μV (12dB SINAD)
Squelch Sensitivity<0.2μV
Intermodulation50dB
Audio Power≥300mW
Current≤100mA
Squelch Level0-9
VOX Level1-9
Diagram showing practical applications and coverage areas: 10,000 m² for restaurant/coffee shop, 20 floors for high building/hotel, 250,000 m² for big shopping mall, and 500,000 m² for school/event site.
Figure 7.1: Practical Application Coverage Areas

8. User Tips

  • Multi-Unit Communication: If you purchase multiple sets (e.g., two sets for a total of four radios), all units can communicate with each other as long as they are set to the same channel.
  • Optimal Range: For best performance, especially in urban environments or areas with many obstructions, try to maintain line-of-sight or minimize barriers between radios. The radios offer a maximum range of 1.5km-3km and can provide clear communication up to 20 floors in high-rise buildings.
  • Battery Life Management: The radios provide 8-12 hours of working time and up to 72 hours of standby time. For extended use, ensure batteries are fully charged before use.
  • Programming: An optional programming cable (C9018A/C9055A) is available for advanced configuration of frequencies and other settings.

9. Warranty and Support

9.1. Warranty Information

Most new RETEVIS products carry a two-year manufacturer's warranty from the date of purchase. For detailed warranty terms and conditions, please refer to the official RETEVIS website or the warranty card included with your product.

9.2. Additional Resources

For further information, including optional accessories and detailed support, please visit the official RETEVIS website: www.retevis.com.

A PDF version of this user manual is available for download: Download User Manual (PDF)

9.3. Manufacturer Contact

Shenzhen Retevis Technology Co., Ltd
Add: 7/F, 13-C, Zhonghaixin Science & Technology Park, No.12 Ganli 6th Road, Jihua Street, Longgang District, Shenzhen, China
E-mail: kam@retevis.com

© 2023 RETEVIS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.