1. Product Overview
The Yeelight Smart Wireless Switch is a versatile dimmer switch designed for intelligent adjustment of smart lighting devices, compatible with Xiaomi smart home ecosystems. It features a rotary knob for intuitive control and a pairing button for easy setup.
Components:
- Rotary Knob: Used for various control functions such as dimming, color adjustment, and mode switching.
- Pairing Button: Located on the side/back, used for initiating the pairing process with Yeelight devices.
- Indicator: A small light that flashes during pairing and for each command sent to a Yeelight device.
2. Setup Instructions
2.1. Battery Installation
- Before use, insert a CR2032 battery into the dimmer. The battery compartment is typically located on the back or side of the device.
- To change the battery, it is recommended to open the back cover of the dimmer using a slotted screwdriver.
2.2. Pairing with Yeelight Devices
- Ensure the dimmer is in the same room as the Yeelight device you wish to pair.
- Turn on the Yeelight device.
- Within one minute of the Yeelight device being powered on, press and hold the Pairing button on the dimmer for more than 3 seconds.
- The indicator on the dimmer will flash during the pairing process.
- Once pairing is complete, the device will send out a signal, and the indicator will stop flashing.
2.3. Physical Installation
The Yeelight Smart Wireless Switch can be installed in two ways:
Method A: Adhesive Tapes
- Remove the adhesive tapes from the back of the dimmer.
- Stick the dimmer in the desired position on a wall or surface.
- Important: Ensure the pasted position is clean and dry for optimal adhesion.
Method B: Hook & Loop
- Strip off the hook of the hook & loop fastener from the back of the dimmer.
- Place it in the desired position. This method allows for easier repositioning.
3. Operating Instructions
The Yeelight Smart Wireless Switch offers intuitive control over your smart lighting:
3.1. Rotary Knob Functionalities
- Tap: Turns the Yeelight device on or off.
- Rotate: Dims or brightens the light.
- Long press: Changes the color of the ambience light (if the connected device supports this feature).
- Tap + Rotate: Adjusts the color temperature of the light.
- Double-tap: Switches between Daylight and Moonlight modes.
3.2. Indicator Behavior
- During pairing, the indicator will flash.
- When you use the dimmer to control a Yeelight device, the indicator will flash briefly for each command sent.
4. Maintenance
4.1. Battery Replacement
When the dimmer indicates a low battery, replace the CR2032 battery promptly. Use a slotted screwdriver to carefully open the back cover and replace the battery. Using a battery of a different model may damage the dimmer or pose a safety hazard.
4.2. Cleaning
To maintain optimal performance and appearance, wipe the surface of the switch with a soft, dry cloth. Avoid using abrasive cleaners or solvents. Ensure the mounting surface is clean and dry if using adhesive installation.
5. Troubleshooting
- Unpairing a Device:
- Open the Yeelight App.
- Choose the Yeelight device you want to unpair from the dimmer.
- Navigate to "Remote controller and switch", select the dimmer, and slide it to the left to delete it.
- Device Failure / Connection Issues: If the paired Yeelight device is not responding or fails to connect properly, try turning off the physical switch of the Yeelight device and then resetting the device. Re-attempt the pairing process. If issues persist, ensure the battery in the dimmer is not low.
- Adhesive Residue: If the adhesive sticker leaves residue upon removal, use a suitable adhesive remover or rubbing alcohol to clean the surface carefully.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | YLKG07YL |
| Recommended Battery Model | CR2032 |
| Wireless Connection | Bluetooth 4.2 BLE |
| Power Source | DC |
| Control Channels | 2 CHANNELS |
| State of Assembly | Almost Ready |
| Service Temperature | -10°C to +40°C |
| Service Humidity | 0% - 85% RH |
| Certification | CE |
| Package Dimensions (L x W x H) | 9 cm x 9 cm x 3 cm |
| Package Weight | 0.11 kg |
7. User Tips
- Compatibility Check: Before purchasing or attempting to pair, verify that the dimmer is compatible with your specific Yeelight smart lamps or other smart home devices.
- Connection Issues: If you experience difficulty connecting, ensure the dimmer's battery is fresh and that the Yeelight device is powered on and within range. If problems persist, try resetting the Yeelight device and re-pairing, or contact Yeelight support.
- Adhesive Care: When installing with adhesive, ensure the surface is thoroughly cleaned and dried for a secure hold. Be mindful that some adhesives may leave residue upon removal.
- Multi-Device Control: The switch supports controlling devices across 2 channels. Confirm your setup allows for the desired synchronization with multiple bulbs or lamps.
8. Frequently Asked Questions (FAQ)
- Q: What are the key features of this product?
- A: The Yeelight Smart Wireless Switch features a flashing indicator during operation and is CE certified, ensuring compliance with European safety standards.
- Q: What are the benefits of using this switch?
- A: Benefits include its 'Almost Ready' state of assembly for quick setup and its ability to control devices across 2 channels, offering flexible smart lighting management.
- Q: What type of equipment does it support?
- A: It supports 2 channels of compatible Yeelight smart lighting equipment.
- Q: Is it compatible with specific Yeelight or Xiaomi smart lights?
- A: Compatibility depends on the specific model of your smart light. Please refer to the product specifications or contact Yeelight support for detailed compatibility information regarding models like the Mi smart ceiling light 350 or Yeelight 1s color bulb.
9. Safety Precautions
- Battery Safety: Do not use batteries of different models than recommended (CR2032), as this may damage the dimmer or create a safety hazard.
- Children Safety: Keep the dimmer out of reach of children to prevent them from playing with or ingesting the battery.
- Long-Term Storage: If the dimmer will not be used for an extended period, remove the battery to prevent leakage and damage.
10. Disposal and Recycling
This product is marked with the WEEE (Waste Electrical and Electronic Equipment) symbol, indicating that it should not be disposed of with other household waste throughout the EU. To prevent potential harm to the environment and human health from uncontrolled waste disposal, please recycle it responsibly. This promotes the sustainable reuse of material resources.
To return your used device, please utilize the return and collection systems available in your region or contact the retailer from whom you purchased the product. They can facilitate environmentally safe recycling.
11. Warranty and Support
For detailed warranty information and customer support, please refer to the official Yeelight website or contact your local distributor. A comprehensive user manual in PDF format is also available for download:
For further assistance, you may also refer to the EU Declaration of Conformity for the Yeelight Smart LED Filament Bulb, which is available from Yeelight Germany GmbH, Flurweg 11, 82402 Seeshaupt.