CHANTOWER Intelligent Power Inverter

Contents

CHANTOWER Intelligent Power Inverter

User Operation Instructions

Introduction

Dear users, to ensure correct usage of this product, please read this manual carefully before use.

Important Clause:

All content in this document has been carefully proofread. If there is any printing error or misunderstanding in the content, our company reserves the final right of interpretation. In case of product technology or upgrades, they will be included in the new version of the manual without prior notice. The appearance of the product is only based on one of the models as a reference. Different models have different appearance specifications and functions. Please refer to the actual product as the standard.

Product Features

  • Lightweight in size, light in weight, high in efficiency, low in working noise, and reasonable in design.
  • Adopting efficient SPWM Pulse Width Control Technology.
  • Adopting multiple high-tech and intelligent driver chips.
  • SMT Chip Mounting Technology, precise control, high reliability, and low failure rate.
  • High efficiency conversion rate, strong load capacity, and wide application range.
  • Multiple intelligent security protection with complete protection functions.

Main Components

The inverter features a robust design with clearly labeled input and output terminals, a cooling fan, and a universal socket.

Diagram showing the back and front panels of the inverter with labeled components: positive/negative terminals, intelligent temperature control fan, machine switch, output jack, cooling hole, USB interface.

Figure 1: Inverter Front and Back Panel Components

  • Input Terminal Positive Terminal (Red): Connects to the positive terminal of the DC power source.
  • Input Negative Terminal (Black): Connects to the negative terminal of the DC power source.
  • Intelligent Temperature Control Fan: Activates to cool the unit based on load and temperature.
  • Machine Switch: Power ON/OFF switch for the inverter.
  • Universal Shaped Socket: AC output for connecting appliances.
  • USB Interface: For charging USB-powered devices.
  • Indicator Light: Green indicates normal operation, Red indicates protection status (e.g., overvoltage, undervoltage, overload, overheating).
  • Cooling Hole: Vents for heat dissipation.

How To Connect The Product

Connection to Battery (Direct Connection)

When connecting directly to a battery, ensure the battery voltage matches the inverter's input voltage (e.g., 12V battery for a 12V inverter). Multiple batteries can be used in parallel for increased capacity.

Inverter connected to a 12V battery, powering a tablet, smartphone, light bulb, and television.

Figure 2: Inverter connected to a 12V battery, powering various devices.

Connection Method for Car Cigarette Lighters

  1. Use a power inverter equipped with a car-mounted cigarette lighter plug.
  2. The cigarette lighter output can only handle electrical appliances with a load of less than 150W.
  3. If the load exceeds 150W, please use the direct battery connection method.

Connection Method for Electric Motorcycle

Generally, the voltage of four batteries in an electric motorcycle is 48V, and five batteries is 60V. The specific voltage should be subject to the voltage marked on the electric motorcycle. Select an inverter with the same voltage as the electric vehicle for use.

Operating Instructions

  1. Place the inverter switch in the OFF position.
  2. Connect the inverter to the battery, ensuring good contact.
  3. Confirm that the power of all electrical appliances is within the rated power range (50% of the peak power marked by the inverter), and that the peak power of inductive load electrical appliances does not exceed the peak power marked by the inverter.
  4. Plug the electrical appliance's plug into the 110V output socket of the inverter.
  5. Turn on the switch of the power inverter. The green indicator light will turn on, indicating normal operation.
  6. A red indicator light indicates that the inverter is turned off due to overvoltage, undervoltage, overload, or overheating.
  7. In many cases, due to the limited output of the vehicle cigarette lighter socket, the inverter may alarm or shut down. In this case, start the vehicle or reduce power consumption to restore normal operation.

Requirements for the Usage Environment

Based on safety and performance considerations, the installation environment should meet the following conditions:

  • Dry: Do not immerse in water or rain.
  • Temperature Conditions: A cool place with a temperature between 0°C and 40°C.
  • Space Conditions: Do not use the power inverter in a narrow space. Do not cover the machine for use, and ensure good ventilation!

Matters Needing Attention

  • When appliances like refrigerator compressors or motors reach their peak power during startup, the inverter may experience overload protection. Turn off electrical switches first, then turn on the inverter, and then turn on electrical switches one by one, starting with the highest peak electrical appliance.
  • During use, if the battery voltage drops (e.g., 10.4-11.0V for a 12V battery), the inverter will sound a buzzing alarm. Turn off sensitive electrical appliances promptly. The inverter will stop outputting current when the voltage drops further (e.g., 9.7-10.3V for a 12V battery), and the red indicator light will illuminate.
  • Start the vehicle or charge the battery in a timely manner to prevent battery depletion.
  • Although the inverter has overvoltage protection, input voltages exceeding 16V (for a 12V battery) can still damage the unit.
  • After continuous use, the surface temperature of the machine casing may rise to 60°C. Ensure smooth airflow and keep away from objects susceptible to high temperature.
  • This power inverter is prohibited for use by minors!

Main Technical Parameters

Parameter Specification
Output Voltage AC 220V±10% (or 110V depending on model)
Output Frequency 50Hz (or 60±2Hz depending on model)
Output Waveform Corrected Sine Wave (Modified Sine Wave)
Input Voltage DC 12V (also available in 24V, 48V, 60V models)
Rated Power 500W, 1000W, 1500W, 2000W (model dependent)
Conversion Efficiency > 90%
No-load Current < 0.3A
Under Voltage Alarm (12V input) 10.4-11.0V
Low Pressure Shutdown (12V input) 9.7-10.3V
Overpressure Shutdown (12V input) 14.5-15.5V
Certification CE

Common Problems & Solutions

Abnormal Phenomenon Reason Resolution Method
Indicator Light Off, Electrical Appliance Not Working Battery voltage mismatch / Reverse connection of positive and negative poles / Poor contact at wiring Check battery voltage consistency and replace if needed / Check battery connection, inverter may be damaged / Check and tighten wiring terminals
Indicator Light Red, Electrical Appliance Not Working Appliance power exceeds continuous power / Appliance peak power too high / Battery discharged / Poor ventilation, overheating shutdown / Input voltage too high Use lower power appliances / Ensure peak power is within inverter range / Charge or replace battery / Turn off, cool down, remove obstructions, reduce load, restart / Check charging system status
Output Voltage Too Low Measured output voltage of voltmeter is too low Use a "true RMS multimeter" to obtain accurate data
Inverter Emits Buzzing Alarm Sound Undervoltage or over temperature protection Shorten or use thicker wires for battery connection, lower machine temperature, improve ventilation, reduce appliance use
Inverter Only Works for Low-power Appliances Voltage decays due to current passing through wire / Electrical power consumption greater than rated power Reduce wire length and use thicker wires / Use a larger capacity battery
Battery Usage Time is Too Short Poor or damaged battery health / Electricity stored after full charge is insufficient / Current decays as it passes through a wire Replace the battery / Replace with a better intelligent charger / Reduce wire length and use thicker wires

User Tips

  • Power Expectations: While rated for peak power, actual continuous output may be lower. For example, a 2000W model might reliably provide around 900W-1000W continuous power. Test with your specific appliances.
  • Direct Battery Connection: For loads exceeding 150W, always connect the inverter directly to the car battery using the provided battery clips, rather than the cigarette lighter socket, to prevent overheating and ensure stable power.
  • Fan Operation: The intelligent temperature control fan may run even without a load, or at varying speeds depending on the internal temperature and load. This is normal operation for cooling.
  • Output Voltage: Some users have reported output voltage slightly below 220V (e.g., 190V). Verify the output voltage with a multimeter if precise voltage is critical for your devices.
  • Appliance Compatibility: This inverter produces a modified sine wave. While suitable for most resistive loads (lights, heaters) and many electronic devices (laptops, phones, TVs), it may not be ideal for sensitive electronics, medical equipment, or appliances with AC motors (like some refrigerators or pumps) that require a pure sine wave.

Maintenance

  • Keep the inverter clean and free from dust. Use a dry cloth for cleaning.
  • Ensure proper ventilation around the unit to prevent overheating. Regularly check that the cooling fan is not obstructed.
  • Periodically check all electrical connections to ensure they are secure and free from corrosion.
  • Store the inverter in a dry, cool place when not in use.

Warranty & Support

This product comes with a three-year warranty. To ensure proper after-sales service, customers must strictly follow the instructions when receiving and using the product.

Warranty Terms:

  • Product Exchange Application: Accessories must be complete and not affect secondary sales. Missing accessories will incur deductions based on factory price.
  • Product Warranty Application: If the machine encounters quality problems without opening or modifying the original packaging, it will be repaired or replaced free of charge by the manufacturer. Unauthorized opening or modification will result in paid maintenance.
  • Damage due to harsh environments (e.g., excessive dirt or age of casing) will result in paid maintenance.
  • For high-power machine casings that are severely scratched, dirty, or old, they should be returned to the factory for repair. After being repaired within the warranty period, the machine will be returned to the customer in its original condition and repaired for free. For machines that have been modified or unpacked without permission, any malfunctions will be paid maintenance.
  • After receiving relevant fees, after-sales service will be promptly handled, and the product delivered by express delivery.

For full details on warranty, returns, and exchanges, please refer to the official user manual PDF: View User Manual (PDF).

Frequently Asked Questions (FAQ)

Q: Is this a pure sine wave inverter?
A: No, this inverter produces a corrected sine wave, also known as a modified sine wave. It is not a pure sine wave inverter.
Q: What is the continuous output power of the 1500W/2000W model?
A: While rated for peak power, the continuous output power is typically lower. For example, a 2000W model might provide around 900W-1000W of continuous power. Always check the specific model's continuous rating and manage expectations accordingly.
Q: Can I use this inverter with a 24V battery?
A: The inverter is available in different input voltage models (12V, 24V, 48V, 60V). Ensure you select the model that matches your battery's voltage. The specific product described in this manual primarily focuses on 12V input models.
Q: Does the fan run constantly?
A: The inverter features an intelligent temperature control fan. It activates and adjusts speed based on the internal temperature and load to ensure optimal cooling. It may run even without a load.
Q: Can this inverter power a refrigerator compressor or water pump?
A: Due to its modified sine wave output, this inverter may not be suitable for all types of refrigerator compressors or water pumps, especially those with sensitive motors. These appliances often require a pure sine wave for optimal performance and longevity. Consult the appliance's manufacturer specifications.
Q: Is this inverter compatible with Australian or European plugs?
A: The inverter typically comes with a universal shaped socket. Please check the product images and specifications for the exact socket type to ensure compatibility with your region's plugs.
Q: How long will a 12V 75Ah battery last when using this inverter?
A: The duration depends entirely on the load connected to the inverter. For example, a 75Ah battery can provide 900Wh (12V * 75Ah). If you draw 100W, it would theoretically last 9 hours (900Wh / 100W), but factors like inverter efficiency and battery discharge limits will reduce this time. Calculate your total appliance wattage to estimate usage time.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.