1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your HIKVISION Multi-language 802.3af POE Video Intercom Kit. This kit includes the DS-KV6113-WPE1(C) Video Intercom Villa Door Station and the DS-KH9510-WTE1(B) Video Intercom Network Indoor Station, along with a PoE Switch for simplified power and data connectivity. The system offers fluent video and audio communication, supporting third-party applications and integrated management via the Hik-Connect app.

2. Package Contents
Verify that all items listed below are included in your package:
- DS-KV6113-WPE1(C) Video Intercom Villa Door Station (x1)
- Surface-mounted rain cover (x1)
- DS-KH9510-WTE1(B) Video Intercom Network Indoor Station (x1)
- PoE Switch (if selected kit option)
- Key fobs (multiple, typically 5-6)
- Mounting Template
- Mounting Plate
- Screws and other installation accessories

3. Specifications
3.1 DS-KV6113-WPE1(C) Villa Door Station
- Size: 138mm x 65mm x 27mm
- Doorbell: Yes
- Material: Plastic
- Power: IEEE802.3af, standard PoE 12 VDC
- Sensor Size: 1/3 inch
- IP Camera Interface: No
- Access Control: Inductive Card
- Waterproof: Yes
- Smart Home Interface: Yes
- Installation: Surface
- Connection Type: Wired
- Viewing Angle: H:131°, V: 78°
- Camera Sensor Type: CMOS
- Technology: DIGITAL
- Certification: CE
- Power (W): 10 W

3.2 DS-KH9510-WTE1(B) Indoor Station
| Category | Parameter | Value |
|---|---|---|
| System Parameters | Operation System | Android 10.1 |
| ROM | 8 GB | |
| RAM | 2 GB | |
| Display Parameters | Screen Size | 10.1-inch |
| Operation Method | Capacitive touch screen | |
| Type | Colorful IPS | |
| Resolution | 1024 × 600 | |
| Audio Parameters | Audio Input | 1 built-in omnidirectional microphone |
| Audio Output | 1 built-in loudspeaker | |
| Audio Compression Bitrate | 64 Kbps | |
| Audio Quality | Noise suppression and echo cancellation | |
| Network Parameters | Network Protocol | TCP/IP, SIP, RTSP |
| Wi-Fi | 2.4 GHz, IEEE802.11b, IEEE802.11g, IEEE802.11n | |
| Network Interface | 1 RJ-45 10/100 Mbps self-adaptive | |
| General | Power Supply | 12 VDC, 1 A, IEEE802.3af, standard PoE |
| Power Consumption | ≤ 12 W |

4. Installation
Before starting the installation, ensure all related equipment is powered off. You will need a drill (2.8-6mm) and a gradienter.
4.1 Surface Mounting without Protective Shield
- Stick the mounting template on the wall. Drill screw holes according to the template. Remove the template from the wall.
- Secure the mounting plate on the wall with the 4 supplied screws according to the screw holes.
- Install the villa door station to the mounting plate. Fix the device on the mounting plate with the set screw.
Note: Apply silicone sealant around the cable wiring area to prevent water from entering.
4.2 Surface Mounting with Protective Shield
- Stick the mounting template on the wall. Drill the screw holes according to the template. Remove the template from the wall.
- Align the protective shield with the mounting template.
- Secure the mounting plate and protective shield on the wall with 4 supplied screws according to the screw holes.
- Install the villa door station to the mounting plate. Fix the device on the mounting plate with the set screw.
Note: If installing outdoors, it is advised to install the device with a protective shield.
4.3 Recommended Installation Height
The recommended distance between the camera and the ground is 1.4 m to 1.6 m.
5. Wiring Diagrams
The DS-KV6113-WPE1(C) door station features various terminals for power, network, and external devices. Ensure all connections are secure and correctly matched.
5.1 Terminal Description (DS-KV6113-WPE1(C))
The door station has the following terminals:
- RS-485+ (Orange), RS-485- (Yellow): RS-485 Interface (Reserved). Note: RS-485 terminal is not supported for this model.
- 12 VDC (Red): Power Supply Input.
- GND (Black): Grounding.
- AIN1 (White): For access of Door Contact.
- AIN2, AIN3, AIN4 (White): Reserved.
- NC (Yellow): Door Lock Relay Output (Normally Closed).
- COM (Green): Common Interface.
- NO (Blue): Door Lock Relay Output (Normally Open).

5.2 Door Lock Wiring
Connect the door lock to the door station using the NC/COM or NO/COM terminals, depending on your lock type. An external DC power supply is required for the door lock.
- Magnetic Lock/Electric Bolt: Use NC/COM terminals (default).
- Electric Strike: Use NO/COM terminals (default).
5.3 Door Contact Wiring
Connect the door contact to the AIN1 and GND terminals on the door station.
5.4 Exit Button Wiring
Connect the exit button to the AIN1 and GND terminals on the door station. When the button is pressed, it will trigger the exit function.
6. Operation
6.1 Activate Device via Web
Before using the device, you must activate it by setting a strong password. Default parameters are: IP Address: 192.0.0.65, Port No.: 8000, User Name: admin.
- Power on the device and connect it to the network.
- Enter the IP address into your web browser's address bar and press Enter to access the activation page. (Ensure the computer and device are on the same subnet).
- Create and enter a strong password in the password field.
- Confirm the password.
- Click OK to activate the device.
Note: If the device is not activated, basic operations and remote configuration cannot be performed.
6.2 Access to the Device by Web Browsers
- In the browser address bar, enter the device's IP address and press Enter to access the login page.
- Enter the user name and password, then click Login.
6.3 Communicate with Indoor Station
- On the indoor station, navigate to Settings > Intercom Press Button to Call to enter the settings page.
- Set the parameters: Edit call No. for each button and check Call Management Center to set the button calling center.
- Press the button on the door station to call the indoor station.
Note: If Call Management Center is checked and a call No. is set, the call management center has higher privilege.
6.4 Issue Card
- On the indoor station, navigate to Settings > Access Control and Elevator Control to enter the settings page.
- Click Issue Card. Present the card on the card reading area of the door station.
- When issuing is finished, a window will pop up on the settings page.
Note: Only Mifare cards are supported. Up to 10,000 cards can be managed. A voice prompt "No more cards can be issued" will be heard if the limit is exceeded.
6.5 Unlock Door
After issuing cards, you can unlock the door by presenting the issued cards to the door station's card reading area.
6.6 App Integration (Hik-Connect)
The Hik-Connect app allows you to manage your intercom system remotely, including receiving calls, viewing live video, and unlocking the door.

6.7 Motion Detection and Call Recording
The system supports motion detection recording and call recording, which can be reviewed directly from the indoor station's event record or album.
7. User Tips
- For optimal performance, ensure your network connection is stable, especially for remote access via the Hik-Connect app.
- Regularly check the event records and album on your indoor station to review motion detection and call recordings.
- When setting up the system, use a strong, unique password for device activation to enhance security.
- If experiencing issues with calls or unlocking, verify all wiring connections are secure and that the devices are powered correctly.
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surfaces of the door station and indoor station. Avoid abrasive cleaners or solvents.
- Firmware Updates: Periodically check the Hikvision official website for firmware updates to ensure optimal performance and security.
- Environmental Protection: Ensure the outdoor station is protected from direct heavy rain and extreme temperatures. The provided rain cover should be used for outdoor installations.
- Cable Inspection: Regularly inspect all cables for any signs of wear or damage.
9. Troubleshooting
- No Power: Check all power connections, including the PoE switch and 12V DC power adapter. Ensure the power source is active.
- No Video/Audio: Verify network cable connections. Ensure the devices are properly configured and activated. Check microphone and loudspeaker settings on the indoor station.
- Door Unlock Failure: Check the wiring to the door lock and power supply. Ensure the card is correctly issued and presented to the reading area.
- Cannot Access via Web: Confirm the device's IP address and ensure your computer is on the same subnet. Verify the device is activated with a password.
- Hik-Connect App Issues: Ensure the app is updated to the latest version. Check network connectivity on your mobile device and the intercom system.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official HIKVISION website or contact your local distributor. Keep your purchase receipt and product serial numbers handy for any support requests.
You can also refer to the comprehensive user manual PDF for more detailed information. View User Manual (PDF)