1. Product Overview
Familiarize yourself with the components of your XIAOMI MIJIA S500 Electric Shaver.

Diagram showing the various parts of the shaver and included accessories.
Components:
- Protective Cover: Protects the shaving head.
- Shaving Head: The triple blade rotary head for shaving.
- On/Off Button: Powers the shaver on or off.
- Body: The main housing of the shaver.
- Indicators: Display Speed, Travel Lock, Clean/Error status, and Battery Level.
- User Manual: This document.
- Cleaning Brush: For removing stubble buildup.
- Info Card: Contains product information.
- Charging Cable: USB Type-C cable for charging.
- Charging Port: Type-C port on the shaver (keep dry).
2. Safety Instructions
Warnings:
- The shaver body can be cleaned with water only after being disconnected from the charging cable.
- Do not disassemble the body to replace the battery.
- Always hold the plug when plugging in or unplugging the charging cable. Never directly pull the cable.
- Do not charge this shaver for extended periods of time while leaving it unattended, and do not charge it longer than 24 hours.
- This shaver contains a built-in rechargeable battery; it should never be exposed to fire, nor charged, used, or stored in high-temperature environments.
- Do not place or insert any foreign objects into this shaver.
- Do not modify or repair this shaver yourself.
- Detach the hand-held part from the supply cord before cleaning it in water.
Precautions:
- Immediately stop using the charging cable if it is damaged or working improperly.
- If the charging cable is damaged, it must be replaced with a genuine charging cable purchased from the manufacturer or after-sales service department.
- Keep this shaver out of reach of children.
- Make sure the charging port is dry when charging.
- Use a 5V charger when charging.
- Fully charge the shaver at least once every six months if it will not be used for an extended period of time.
Notes:
- This shaver is intended for indoor use only and for use by a single individual.
- When traveling, install the protective cover and enable the travel lock.
- Recommended operating, charging, and storage temperature: 5°C to 35°C.
- Do not wrap the charging cable around the shaver to avoid damage.
- This shaver is only suitable for facial hair; not recommended for head or other body parts.
- The shaver meets IPX7 standards for waterproofing and can be cleaned with water. Do not immerse in water for extended periods.
- Water dripping through body gaps during rinsing is normal and safe, as electronic components are in a waterproof compartment. Standing it upright helps drain water.
- This shaver is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience/knowledge, unless supervised or instructed by a responsible person.
3. Setup
Initial Charging:
- Connect the provided USB Type-C charging cable to the shaver's charging port.
- Connect the other end of the cable to a USB-A adapter (5V charger recommended).
- The battery level indicator will blink slowly, and the number will increase during charging.
- Once fully charged, the indicator will display 100% and stop blinking.
- Ensure the charging port is dry before connecting the cable.
First Use Recommendation:
It is normal for skin to be slightly irritated after the first few shaves. Regularly use the shaver (at least 3 times a week) for 3 weeks to allow your skin to adapt.
4. Operating Instructions
Turning On/Off:
- Press the On/Off button to turn the shaver on or off.
- When turned on, the battery level indicator will display, and other indicators (clean/error, travel lock, speed) will sequentially turn on and off.
- When turned off, all indicators will go off.
Switching Shaving Modes:
- When the shaver is on, press and hold the On/Off button for 1 second to switch between:
- Speed Mode: Speed indicator is on.
- Standard Mode: Speed indicator is off.
Shaving Technique:
Apply gentle pressure and shave your face in circular motions. It is not necessary to repeatedly shave the same area. For optimal results, shave dry.

Illustration demonstrating circular shaving motions.
Note: Improper use can damage the shaving head and blades. Check for intactness before use. Stop using if damaged.
Travel Lock:
The shaver is equipped with a travel lock to prevent accidental activation during travel.

Illustration showing the travel lock icon on the shaver.
- Enabling Travel Lock: When the shaver is off, press and hold the On/Off button for 3 seconds. The travel lock indicator will turn on for 3 seconds, then go off.
- Disabling Travel Lock: When the travel lock is enabled, pressing the button will make the travel lock and battery level indicators blink. To disable, press and hold the button for 3 seconds. The indicators will blink and go off, and the shaver will turn on.
Battery Level Indication:
The shaver displays battery status both during use and charging.

Illustration of the battery level display on the shaver.
| Battery Level | Indicator Status |
|---|---|
| 100–5% (While Using) | On |
| <5% (While Using) | Blinking |
| 0% (While Using) | Unable to turn on |
| 0–100% (While Charging) | Blinking slowly |
| 100% (While Charging) | On |
The shaver supports plug-and-play. If the battery is low, you can use it while charging. However, never use the shaver in the shower if the charging port is wet during charging.
5. Maintenance
The clean/error indicator blinks for 5 seconds after turning on (and every 30 minutes of use) to remind you to clean the shaver.
- Ensure the shaver is off and not charging before cleaning.
- Rinse Shaving Head: Rinse the shaving head under a faucet (warm water recommended).

Rinsing the shaving head under running water.
- Remove Shaving Head: Remove the shaving head from its holder.

Detaching the shaving head from the shaver body.
- Rinse Stubble Buildup: Rinse away stubble buildup with water or use the cleaning brush.

Cleaning stubble from the detached shaving head.
- Clean Inside Shaving Head: Turn over the shaving head to clean its inside under a faucet (warm water recommended). Do not use a towel or paper towel to wipe.

Rinsing the interior of the shaving head.
- Reinstall Shaving Head: Wipe away excess water from the shaving head holder and reinstall the shaving head.

Reattaching the clean shaving head to the shaver.
Important: Use the protective cover to cover the charging port while cleaning. Ensure the charging port is dry before plugging in the cable.

Protective cover placed over the charging port during cleaning.
To ensure optimal performance, it is recommended to replace the shaving head every two years. Visit www.mi.com to purchase a replacement.
6. Troubleshooting
| Issue | Possible Causes | Solution |
|---|---|---|
| Poor-quality shaving | Shaving head damaged/worn out Shaving head clogged with stubbles Low or depleted battery | Replace with genuine shaving head Thoroughly clean shaving head Connect charging cable |
| Shaver does not work | On/off button malfunction Travel lock is enabled | Return for service Press and hold button for 3 seconds to disable |
| Indicator light error/off | Low battery Circuit board damaged | Charge shaver Return for service |
| Irritated skin after shaving | Shaving head damaged/worn out Skin needs adaptation time | Replace with genuine shaving head Irritation fades after 2-3 weeks of use |
| Unable to charge | Shaver damaged Ambient temperature too low/high | Return for service Charge between 5°C to 35°C |
| Usage time < 60 mins | Motor load increased (dirty head) Shaver battery error | Thoroughly clean shaving head Return for service |
| Clean/error indicator blinks | Motor load increased (dirty head) Shaving head not properly installed | Thoroughly clean shaving head Reinstall shaving head or contact service |
7. Specifications
| Feature | Detail |
|---|---|
| Name | Mi Electric Shaver |
| Model | S500 |
| Rated Voltage | 3.7 V |
| Charging Port | Type-C |
| Rated Power | 3 W |
| Rated Input | 5 V ⎓ 1 A |
| IP Rating | IPX7 |
| Charging Time | Approx. 90 min |
| Origin | Made in China |
8. User Tips
- If the included instructions are in a foreign language, consider using a translation app like Google Lens on your smartphone for quick translation.
- Many users report excellent battery life, often lasting over a week on a single charge.
- This shaver performs very well for those with lighter beard growth, providing a clean and smooth shave.
- The IPX7 rating confirms it is fully waterproof, allowing for both wet and dry shaving, and can be used with shaving foam.
- Check for the availability of replacement shaving heads to ensure long-term usability of your shaver.
9. Environmental Protection & Battery Removal
When the shaver reaches the end of its service life, please remove, dispose of, or recycle the built-in battery in accordance with local laws and regulations.
Warning: Do not expose this shaver or its battery to fire to prevent explosion or release of toxic/hazardous substances.
Removing Battery:
Note: Make sure the battery is completely depleted before removing it.
- Use a standard screwdriver to pry open the bottom and top covers, and remove the on/off button. These parts cannot be restored once disassembled.

Prying open the bottom cover.

Prying open the top cover.

Removing the On/Off button.
- Use a Phillips-head screwdriver to remove screws on the bottom and release the inner compartment.
- Use a Phillips-head screwdriver to remove screws from the inner compartment, then use a standard screwdriver to pry open the inner compartment from the bottom. Cut off the contact plate on the battery, being careful not to short circuit. Remove the battery and handle it appropriately.
10. Warranty & Support
As a Xiaomi consumer, you benefit from specific consumer warranty benefits in addition to any legal warranties provided by your national consumer law. The duration and conditions related to legal warranties are provided by respective local laws.
For more information about consumer warranty benefits, please refer to Xiaomi's official website: https://www.mi.com/en/service/warranty/.
After-sales services are generally limited to the country or region of original purchase. Under consumer warranty, Xiaomi will, at its discretion, repair, replace, or refund your product. Normal wear and tear, force majeure, abuse, or damage caused by user negligence are not warranted.
The manufacturer of this product is SOOCAS (Shenzhen) Technology Co., Ltd. (a Mi Ecosystem company).
