1. Introduction
Thank you for choosing the SPEEDRACING SK-1011 Aluminum Car Gear Shifter Extender Kit. This product is designed to enhance your driving experience by extending the height of your car's gear shift lever, allowing for easier reach and an improved shifting feel. The adjustable height feature and durable construction ensure a customizable and reliable upgrade for your vehicle.
2. Safety & Warnings
Important Safety Information:
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Handle with care to avoid cuts or injuries.
This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.
3. Package Contents
Ensure all the following items are included in your package:
- 1 x Shift Head Extension Rod (Short Shifter Extender)
- 1 x Hexagonal Wrench
- 4 x Adapters (M8*1.25, M10*1.25, M10*1.5, M12*1.25)
- 4 x Mounting Screws
- 1 x Locknut
4. Specifications
| Feature | Detail |
|---|---|
| Product Type | Gears, Shift Knob Extension |
| Model Name | SK-1011 |
| Brand Name | SPEEDRACING |
| Material | Aluminum alloy + Stainless steel |
| Available Colors | Red, Black, Blue, Silver, Purple, Toasted Blue, Neo Chrome |
| Adapter Specifications | M8*1.25, M10*1.25, M10*1.5, M12*1.25 |
| Adjustable Height | Up to 70mm |
| Package Dimensions (approx.) | Length: 23cm, Width: 7cm, Height: 7cm |
| Package Weight (approx.) | 0.405 kg |
5. Compatibility
This shifter extender is designed for a wide range of vehicles. Please check the adapter specifications to ensure compatibility with your car's gear lever thread size.
- For most other universal cars.
- For 1988-2000 Honda Civic with B/D Series Engine.
- For 1988-1991 Honda CRX with B/D Series Engine.
- For 1993-1997 Honda Del Sol with B/D Series Engine.
- For 1990-2001 Acura Integra with B/D Series Engine.
- For Honda and Acura vehicles with a B or D series engine/transmission.
- Or other models with matching sizes (refer to adapter specifications).
6. Setup (Installation Instructions)
Follow these steps to install your gear shifter extender:
- Remove the original car gear shift knob.
- Select the appropriate adapter from the four provided (M8*1.25, M10*1.25, M10*1.5, M12*1.25) that matches your car's gear lever thread.
- Screw the selected adapter onto the car's gear lever.
- Screw the gear shift knob extender tightly into the adapter on the car's gear lever.
- Install your gear shift knob onto the top of the extender.
- Tighten the mounting screws on the extender with the included hexagonal wrench to reinforce the connection between your gear lever and the extension lever.
- Secure the shift knob with the provided locknut for better shifting stability.
Note: Sellers shall add and adjust product-specific steps where necessary. Ensure the final user manual is accurate, complete, and legally compliant.
7. Operation
The primary function of this kit is to extend the height of your gear shifter, making it more accessible and comfortable for some drivers. The adjustable pivot ball allows you to customize the height of the shifter. The offset elbow of the shifter can also be rotated to several different positions to fine-tune your ergonomic setup. Adjusting the pivot ball upwards can shorten the shift stroke, providing a quicker and more precise shifting feel.
After installation, test the shifter's movement and ensure all gears engage smoothly and without obstruction. Make sure the shift knob returns to its neutral position reliably after each shift.
8. Maintenance
- Regularly check all screws and connections to ensure they remain tight. Loose components can affect shifting performance and safety.
- Clean the extender with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the anodized finish.
- Periodically inspect the extender for any signs of wear, damage, or corrosion. Replace if necessary.
9. Troubleshooting
- Issue: Shift knob does not return to original position or feels heavy.
-
Possible Cause: The weight of the extender or the shift knob might be affecting the return mechanism of the transmission. Incorrect installation or overtightening can also cause this.
Solution:
- Ensure all components are installed correctly and not overtightened.
- Verify that the extender is not interfering with any internal mechanisms of the shifter assembly.
- If the issue persists, consult a professional mechanic.
- Issue: Extender does not fit the car's gear lever.
-
Possible Cause: Incorrect adapter size selected or the car's gear lever has a different thread size than the provided adapters.
Solution:
- Double-check the thread size of your car's gear lever.
- Ensure you are using one of the four provided adapters (M8*1.25, M10*1.25, M10*1.5, M12*1.25) that matches your vehicle's thread.
- If your car's thread size is not among the provided adapters (e.g., M6), you may need to purchase a separate conversion adapter.
10. User Tips
- Many users find that the increased grip and moderate length of the extender significantly improve operability and overall driving comfort.
- Experiment with the adjustable height and rotatable offset elbow to find the most comfortable and efficient shifting position for your driving style.
- Always ensure the correct adapter is used for a secure fit to prevent loosening during use.
11. Frequently Asked Questions (FAQ)
- Q: What is the functionality of this gear shifter extender?
- A: The shift knob extension is designed to extend the height of the shift knob for easier reach and an improved shifting experience.
- Q: How does it perform?
- A: The shift knob extension performs well and generally improves the shifting experience by offering better ergonomics.
- Q: Is it safe to use?
- A: Yes, when installed correctly according to the instructions, the shift knob extension is safe to use.
- Q: Will it fit my car?
- A: The shift knob extension has a universal fit with multiple adapters, so it should fit most cars. Please check the provided adapter sizes (M8*1.25, M10*1.25, M10*1.5, M12*1.25) against your car's gear lever thread size.
- Q: What is the quality of material used in it?
- A: The shift knob extension is made of high-quality aluminum alloy and stainless steel, ensuring durability and a smooth finish.
12. Manufacturer Information & Support
Manufacturer: Zhejiang xuzhong automobile parts co., ltd
Address: No. 666, jingye road, economic development zone, rui'an city, wenzhou city, zhejiang province
Email: bk202415258653650@163.com
Telephone: 86-15888266370
EU Authorized Representative: SUCCESS COURIER SL
Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
Tel: 34-910602659
Email: successservice2@hotmail.com
For further details or a downloadable version of the user manual, please refer to the official PDF document: User Manual (PDF).