AUXITO LED Car Headlight Bulbs User Manual

1. Product Overview

The AUXITO LED Car Headlight Bulbs are designed to provide superior illumination for your vehicle. Featuring a mini size and fanless design, these bulbs offer a super bright 6500K white light with a perfect beam pattern, ensuring no glare for oncoming drivers. They are engineered for easy, plug-and-play installation, closely matching the design of original halogen bulbs.

2. Safety & Warnings

• ⚠ WARNING: CHOKING HAZARD – This product contains small parts. Not for children under 3 years.
• ⚠ WARNING: California Proposition 65 – This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

3. Package Contents

Your AUXITO LED Car Headlight Bulbs package includes:

• 2 x LED Light Bulbs
• 1 x Product Manual
• 1 x Pair of Gloves

4. Specifications

5. Installation Instructions

Please watch the video below for a visual guide on installing H7 LED bulbs. General steps for other bulb types are provided afterwards.

General Installation Steps (H7, H1, H3, H4, H8, H9, H11, H16, 9003, 9005, 9006, 9007, 9008, 9012, HB3, HB4, HB5, HIR2, H10, 9145, 9140)

1. Remove the Original Bulb:
   • If present, remove the dust cover.
   • Disconnect the electrical plug from the original bulb.
   • Depending on the bulb type, turn the original bulb counter-clockwise or press down and release the spring buckle to remove it from the housing.
2. Install the LED Bulb:
   • Align the tab parts of the LED bulb with the groove sections of the light housing.
   • Insert the LED bulb into the socket. For some models (e.g., H4, 9003), you may need to press down and turn clockwise until it locks in place. For others (e.g., 9004/HB1, 9007/HB5), insert the vehicle's original light holder with the LED bulb, rotate clockwise, and lock.
   • Important: Confirm the LED chips face 3 and 9 o'clock for optimal beam pattern.
3. Connect the Plug: Reconnect the electrical plug to the new LED bulb.
4. Power Test: Turn on your vehicle's lights to test the new LED bulbs.
5. Replace Dust Cover: If applicable, replace the dust cover.

6. Troubleshooting

If you encounter any issues, refer to the following troubleshooting guide:

• Flickering/Error Warning: For some sensitive vehicles (e.g., Jeep, Chrysler, Dodge Ram, GMC, Ford), flickering or error warnings may occur. This is often due to CANbus system incompatibility. You may need to install an additional CANbus adapter or load resistor to resolve this.
• No Light:
  1. Check all wires to ensure they are connected correctly and fuses are functioning.
  2. If only one bulb works, swap the left and right bulbs to determine if it's a CANbus problem or a defective bulb.
• Light is Dim: Check that the bulbs are securely locked into place and that the LED chips are clean and intact.

Conditions Beyond Warranty Scope:

The following issues are generally not covered under warranty:

• CANbus problems that cannot be resolved with suitable decoders.
• Installation problems due to limited installation space in some vehicles.
• Damages caused by irresistible natural disasters (e.g., earthquake, flood).

7. User Tips

• Polarity Check: These bulbs have polarity. If a bulb does not light up after installation, remove it, flip it 180 degrees, and try again.
• CANbus Compatibility: For vehicles with sensitive CANbus systems, consider purchasing a CANbus decoder or load resistor to prevent flickering or dashboard errors.
• Heat Management: While designed for efficient heat dissipation, monitor the temperature of the LED chips after initial use. Excessive heat (e.g., 151°C after 5 minutes) could indicate a potential issue and risk of damage to the headlight assembly or fire. If you observe such temperatures, discontinue use and contact support.

8. Warranty & Support

AUXITO offers a 1-year warranty on its products. If you experience any defects in materials or manufacturing within 12 months from the date of purchase, please contact us through AliExpress message.

Warranty Claims Process:

1. Take a clear photo showing the code located on the bottom of the lamp.
2. Provide proof of purchase, including the order number, product serial number, and date of purchase.
3. Send the pictures and details to our customer service team. We will arrange replacements or a partial/full refund based on the severity of the defect after verification.

For any questions or concerns, please contact our customer service team. We are committed to providing professional and friendly support, with messages typically replied to within 24 hours.

9. Compliance Information

This product complies with relevant European directives and standards.

• CE Certified: Indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
• RoHS Compliant: Restricts the use of hazardous substances in electrical and electronic equipment.
• WEEE Directive: This product is marked with the WEEE symbol, indicating that it should not be disposed of with other household waste. Please dispose of it at an appropriate collection point for the recycling of electrical and electronic equipment.

10. Manufacturer & EU Representative Information

Manufacturer:
SHENZHEN TUYAO AUTO ACCESSORIES CO.,LTD
Address: NO.504, BUILDIND 225, BULONG ROAD, MAANTANG COMMUN BANTIAN STREET, LONGGANG SHENZHEN 518028 GUANGDONG

EU Authorized Representative:
APEX CE SPECIALISTS LIMITED
Address: Grafenberger Allee 277, 40237 Düsseldorf, DE
Contact: Wells Yan
Email: Info@apex-ce.com
Tel: +49 21312066043