1. Introduction
The M5Stack ATOMS3 Lite is a compact and programmable development kit designed for various embedded smart device applications. Featuring the ESP32-S3FN8 as its main controller, it integrates Wi-Fi, a 3D antenna, and a 5V to 3.3V power circuit. Its small form factor, measuring just 24.0 x 24.0 x 9.5mm, makes it ideal for projects where space is a premium.
This manual provides essential information for setting up, operating, and maintaining your ATOMS3 Lite device.
2. Key Features
- Developed based on ESP32-S3FN8 microcontroller.
- Built-in USB download function for easy programming.
- Integrated programmable button for user interaction.
- Infrared (IR) transmission function.
- Expandable pins and interfaces for versatile connectivity.
- Supports multiple development platforms including UIFlow2, Arduino IDE, ESP-IDF, and PlatformIO.
- Includes an IR transmitter LED, RGB status indicator, and HY2.0-4P interface.
- Onboard USB Type-C port for program download and serial communication.
- M2 screw hole on the back for convenient mounting.

3. Component Overview
The ATOMS3 Lite is equipped with several key components for its functionality:

- IR-LED (G4): Infrared transmitter LED.
- RGB LED (G35): Programmable RGB status indicator.
- Button (G41): User-programmable button.
- RESET: Reset button for the device.
- USB-C: USB Type-C port for power, programming, and serial communication.
- HY2.0-4P: 4-pin interface for external connections.
- Ext.Pin @2.54mm: External pin headers for GPIO expansion.
- M2-SCREW HOLE: Mounting point for securing the device.
4. Specifications
Below are the technical specifications for the M5Stack ATOMS3 Lite:
| Specification | Parameter |
|---|---|
| SoC | ESP32-S3FN8 |
| Flash | 8MB |
| RGB | WS2812C-2020 |
| DC-DC | SY8089 |
| Operating Temperature | 0 ~ 40°C |
| Power Voltage | 5V |
| Power Method | Type-C |
| Output Voltage | 3.3V |
| IO Interface x6 | G5/G6/G7/G8/G38/G39 |
| Product Size | 24.0 x 24.0 x 9.5mm |
| Product Weight | 5.3g |
| Package Size | 85.0 x 65.0 x 12.2mm |
| Gross Weight | 11.0g |



5. Pinout Diagram
Understanding the pinout is crucial for connecting external components and expanding the functionality of your ATOMS3 Lite. The device provides access to 13 pins, 8 of which are General Purpose Input/Output (GPIO) pins.

5.1. Pin Descriptions
- 3V3: 3.3V power output.
- TCH5-TCH8 (G5-G8): Touch-sensitive input pins, also usable as general-purpose GPIO.
- CLK_OUT3 (G39): Clock output pin.
- G38: General-purpose GPIO pin.
- 5V: 5V power input/output.
- GND: Ground pin.
- G35 RGB: GPIO pin connected to the RGB LED.
- G4 IR: GPIO pin connected to the IR-LED.
- G41 Button: GPIO pin connected to the programmable button.
5.2. HY2.0-4P Interface
The HY2.0-4P interface provides a convenient way to connect compatible modules:
- Black: GND (Ground)
- Red: 5V (Power)
- Yellow: G2 (GPIO)
- White: G1 (GPIO)
6. Initial Setup and Download Mode
To begin using your ATOMS3 Lite, you will typically need to flash firmware onto it. Follow these steps to enter download mode:
- Connect the ATOMS3 Lite to your computer using a USB Type-C cable.
- Press and hold the RESET button on the device.
- Continue holding the RESET button for approximately 2 seconds until the internal green LED lights up.
- Release the RESET button.
Your device is now in download mode and ready for flashing new firmware using your preferred development environment.
7. Programming the ATOMS3 Lite
The ATOMS3 Lite supports various programming environments, offering flexibility for developers of all skill levels.
7.1. UIFlow2
UIFlow2 is a graphical programming platform that allows you to control the ATOMS3 Lite using a block-based interface, simplifying the coding process.
7.2. Arduino IDE
For those familiar with C/C++, the Arduino IDE provides a robust environment for programming the ATOMS3 Lite. You will need to install the ESP32 board support package and the M5Stack libraries.
7.3. ESP-IDF
The Espressif IoT Development Framework (ESP-IDF) is the official development framework for the ESP32 series, offering advanced features and direct control over the hardware.
7.4. PlatformIO
PlatformIO is a professional embedded development ecosystem that supports the ATOMS3 Lite, providing a unified environment for coding, building, and uploading firmware.
8. Applications
The compact size and powerful ESP32-S3FN8 chip make the ATOMS3 Lite suitable for a wide range of applications:
- IoT Nodes: Ideal for creating small, connected devices for smart homes, environmental monitoring, or industrial automation.
- Microcontrollers: Can be used as the core of custom electronic projects requiring Wi-Fi and Bluetooth connectivity.
- Wearable Devices: Its small footprint makes it suitable for integration into wearable electronics.
- Educational Projects: A great tool for learning about embedded systems, IoT, and programming with Arduino or UIFlow.

9. User Tips
Based on user feedback, here are some helpful tips for using your ATOMS3 Lite:
- The board is highly versatile and can be used for a wide variety of projects, from simple blinking LEDs to complex IoT solutions.
- It integrates well with Home Assistant for smart home automation, especially for creating Bluetooth bridges.
- Consider its compact size when designing enclosures or integrating into existing systems.
10. Maintenance
To ensure the longevity and optimal performance of your M5Stack ATOMS3 Lite, follow these maintenance guidelines:
- Cleaning: Use a dry, soft cloth to clean the device. Avoid using liquids or abrasive cleaners.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Handle the device with care to avoid physical damage to the board or connectors.
- Firmware Updates: Regularly check for and install firmware updates from M5Stack's official resources to benefit from new features and bug fixes.
11. Troubleshooting
If you encounter issues with your ATOMS3 Lite, consider the following common troubleshooting steps:
- Device Not Powering On: Ensure the USB Type-C cable is securely connected to both the device and a reliable power source (e.g., computer USB port, 5V power adapter).
- Unable to Upload Firmware:
- Verify that the device is in download mode (green LED lit after holding RESET for 2 seconds).
- Check if the correct COM port is selected in your Arduino IDE or PlatformIO settings.
- Ensure all necessary drivers (e.g., USB-to-serial converter drivers) are installed on your computer.
- Confirm that the correct board definition and libraries are installed in your development environment.
- Wi-Fi/Bluetooth Connectivity Issues:
- Check your code for correct Wi-Fi credentials or Bluetooth pairing procedures.
- Ensure the device is within range of the Wi-Fi network or Bluetooth host.
- Verify that the 3D antenna is not obstructed or damaged.
- Button/LED Not Responding:
- Review your code to ensure the correct GPIO pins are being accessed and configured.
- Check for any physical damage to the button or LED.
- External Modules Not Working:
- Verify wiring connections to the HY2.0-4P or external pin headers.
- Ensure external modules are compatible and powered correctly.
- Check your code for proper initialization and communication protocols (e.g., I2C, SPI).
12. Warranty and Support
For warranty information, technical support, and further assistance, please refer to the official M5Stack website or contact their customer service. Keep your purchase receipt as proof of purchase.
13. Additional Resources
For more in-depth technical details and development guides, please refer to the following resources:
- Official User Manual (PDF): Download PDF
- ESP32-S3 Datasheet: Refer to Espressif's official documentation for the ESP32-S3 microcontroller.
- SY8089 Datasheet: Refer to the datasheet for the SY8089 DC-DC converter.
- Arduino Quick Start Guide: Official M5Stack guide for Arduino IDE setup.
- Arduino Library: M5Stack's official Arduino library for ATOMS3 Lite.
- UIFlow2 Quick Start Guide: Official M5Stack guide for UIFlow2 setup.
- M5Stack GitHub Repository: For M5Unified library and other open-source resources.