Dreamizer LED Whip

Contents

Dreamizer 4FT 5050RGB Bluetooth LED Whip Lights User Manual

Model: LED Whip

1. Product Information

These LED whip lights are designed for universal use with automobiles and motorcycle spare parts, including ATVs, UTVs, RZRs, Can-am, Dune Buggies, Sand Rails, 4 Wheelers, Golf Carts, Go Karts, Motorcycles, and industrial equipment. They offer vibrant, customizable lighting for enhanced visibility and aesthetics.

2. Safety & Warnings

WARNING: Professional installation is recommended.

  • Ensure all connections are secure and properly insulated to prevent short circuits.
  • Do not operate the lights if any part is damaged.
  • Keep the product away from excessive heat sources.
  • Always adhere to local regulations regarding vehicle lighting.

3. Package Contents

The package includes the following items:

  • 2 x Flagpole Lamp Light (4FT / 1.2M each)
  • 1 x Remote Control (LED Lamp Controller)
  • 1 x Wiring Harness
  • 1 x American Flag
  • Mounting Hardware (Quick Release Base, nuts, washers, zip ties)
Diagram showing all included components: two 4FT LED whips, an American flag, a remote control, wiring, and mounting hardware.
Figure 1: Package Contents Diagram

4. Specifications

Feature Specification
Model Name LED Whip
Length 4FT (1.2 meters) per piece
Material PC + Aluminum, Silicone coating
Wattage 35W - 55W
LED Type 5050 RGB
Operating Voltage DC12V
Waterproof Rate IP67
LED Lifespan 50,000 hours
Lighting Modes 300+ patterns, 366 modes, 12 classic solid colors, 20 color combinations
Brightness Levels 32
Speed Settings 10
Special Features Bluetooth and Remote Control, Brake Light and Turn Signal Functions (requires vehicle system)
Item Weight 0.78kg
Certification CE

5. Setup Instructions

  1. Mount Up:
    • Remove the bottom nut and the spring washer on the bottom of your quick-release mount.
    • Mount the LED WHIP into any open ½" bolt mount on your vehicle. Make sure the flat washer is in between the whip and the mount.
    • Place the spring washer underneath the mount and then re-screw the bottom nut.
    • For a pair, repeat the process for the second whip.
  2. Get Wired:
    • Grab your battery cord and connect it to the bottom hanging cord on your LED WHIP.
    • For a pair, connect the 3-prong plug coming out the side of the master LED WHIP to the plug coming from the slave LED WHIP. Note: The slave LED WHIP cannot function without being connected to the master LED WHIP.
    • Feed the power cord through to your vehicle battery.
    • Connect the terminal wire to the Positive (+) and Negative (-) terminals of your vehicle battery.
    • Hide any extra wiring with zip ties.
  3. When not attached:
    • When the whip is not attached to the base, use the supplied cap to keep dirt and debris out of the connector.
  4. Securing the Flag:
    • Use the flag mounts to secure the flag to the whip.
Detailed diagram showing the four steps of installation: mounting the whip, wiring connections, using the protective cap, and attaching the flag.
Figure 2: Installation Process

6. Operating Instructions

The LED whip lights can be controlled via an IR remote control or a Bluetooth application on your smartphone.

6.1. IR Remote Control

The included remote control allows for basic adjustments:

  • ON/OFF: Power the lights on or off.
  • Brightness: Adjust the light intensity (Brightness Plus/Minus).
  • Mode: Switch between different lighting patterns (Mode +/Mode -).
  • Speed: Adjust the speed of dynamic lighting effects (Speed Plus/Minus).
  • Color Switch: Change colors directly (Color Switch Plus/Minus).
  • Music Modes: Activate music-reactive lighting (Music 1/Music 2).
  • Timing: Set a timer for 1 hour or 2 hours off.

6.2. Bluetooth App Control

For advanced control and customization, use the dedicated Bluetooth app (available for iOS and Android):

  • RGB Color Wheel: Select any color from a full spectrum.
  • Pre-selected Color Palettes: Choose from various predefined color schemes.
  • Patterns: Access numerous lighting patterns (over 300 patterns, 366 modes).
  • Music Sync: Synchronize lighting effects with music.
  • DIY Colors and Patterns: Create and save your own custom lighting configurations.
  • Password Lock Function: Secure your settings.
Image showing both the physical IR remote control and a smartphone screen displaying the Bluetooth app interface with a color wheel and various settings.
Figure 3: Control Methods (IR Remote and Bluetooth App)

6.3. Lighting Effects Demonstration

The following video demonstrates various lighting effects and app control features:

Video 1: Demonstration of various lighting patterns and app control.

7. Maintenance

To ensure the longevity and optimal performance of your LED whip lights, follow these maintenance guidelines:

  • Cleaning: Regularly clean the silicone coating with a soft, damp cloth to remove dirt and dust. Avoid abrasive cleaners.
  • Protection: The LED chips are protected by an EVA transparent heat shrink tube and high-toughness silicone, making them resistant to water and dust. However, avoid prolonged submersion or high-pressure water jets directly on the connections.
  • Storage: When not in use, especially during off-season, store the whip lights in a dry, cool place. Use the supplied protective cap for the quick disconnect base to prevent debris from entering.
  • Inspection: Periodically check wiring and connections for any signs of wear, corrosion, or damage. Ensure all mounting hardware remains tight.
Image showing the LED whip light being splashed with water, demonstrating its IP67 waterproof rating.
Figure 4: Waterproof Feature (IP67 Rating)

8. Troubleshooting

If you encounter issues with your LED whip lights, consider the following:

  • Lights not turning on: Check all power connections to the battery. Ensure the quick disconnect base is fully engaged. Verify the remote control battery is functional.
  • Inconsistent lighting/flickering: Inspect wiring for loose connections or damage. Ensure the operating voltage is stable (DC12V).
  • Remote control not responding: Check the remote control battery. Ensure there are no obstructions between the remote and the receiver. Try using the Bluetooth app as an alternative.
  • Bluetooth app connectivity issues: Ensure Bluetooth is enabled on your device. Restart the app and the whip lights. Make sure your device is within range.

9. User Tips

  • The product comes as a pair of 4-foot (1.2 meter) whip lights.
  • For optimal performance and safety, ensure the whips are securely mounted to prevent excessive movement during vehicle operation.
  • When using the turn signal function, confirm your vehicle is equipped with a compatible turn signal system.

10. Warranty & Support

Your Dreamizer LED Whip Lights come with a 365-day warranty from the date of purchase. For any quality issues, free replacement or refund options are available. Professional remote guidance for installation and troubleshooting can be provided.

For further assistance, please contact:

  • Manufacturer: Guangzhou Qicaifeng Motorcycle Accessories Ltd.
  • Email: jmmanufacturer@outlook.com
  • EU Authorized Representative: Wincomply Service Germany GmbH
  • EU Email: eurep@wincomply.com

A detailed user manual in PDF format is also available for download. You can find it by searching for "Item guides & documents" on the product page or by contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.