TOPEAK TB-650B/TB-650W/TB-750B/TB-750W

Contents

Topeak Cycling Water Bottle User Manual

Version: 001 | Last Updated: 03/02/2026

1. Important Safety Information

▲ Warning:

  • Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
  • Keep the device and its cord (if applicable) out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

2. Product Overview

The Topeak Cycling Water Bottle is designed for cyclists and active individuals, offering a convenient and safe way to stay hydrated. Made from lightweight, food-grade polyethylene, it is BPA-free, non-toxic, and odorless, ensuring your drinking water health.

Key features include a squeezable body for quick water replenishment, a leak-proof jet valve with a lockable design, and a wide mouth for easy cleaning. The bottle is available in 650ml and 750ml capacities and comes in black or white colors. Its standard 6.5cm diameter makes it suitable for most kettle holders.

Topeak Cycling Water Bottles in 650ml and 750ml sizes, black and white
Topeak Cycling Water Bottles available in 650ml and 750ml capacities, in both black and white.
Polyethylene pellets, illustrating food-grade material
The bottle is made from lightweight, food-grade polyethylene, ensuring it is BPA-free, non-toxic, and odorless.
Images showing the water bottle being used for cycling, running, and commuting
The water bottle is suitable for various activities including cycling, running, and commuting.

3. Setup

  1. Initial Cleaning: Before first use, thoroughly wash the bottle and cap with warm water and mild detergent. Rinse well.
  2. Check Components: Ensure all parts (bottle, cap, jet valve) are intact and free from damage.
  3. Assemble: Securely screw the cap onto the bottle.

4. Operating Instructions

The Topeak Cycling Water Bottle features a convenient jet valve for easy hydration.

Demonstration of the jet valve operation, showing how to open, close, and squeeze the bottle for water release.
  • To Release Water (Open): Pull the jet valve upwards. The valve is now open, allowing water to flow when the bottle is squeezed or tilted.
  • To Lock Water (Shut): Press the jet valve downwards. This locks the valve, preventing accidental leaks during transport or when not in use.
  • Drinking: With the valve open, gently squeeze the bottle to release water. The squeezable design allows for quick and easy hydration.
Diagram showing the lockable jet valve: 'Press down to lock the water' and 'Pulling up can release water'
Visual guide for operating the lockable jet valve: push down to shut, pull up to open.

5. Maintenance

Proper care ensures the longevity and hygiene of your water bottle.

  • Cleaning: The wide mouth design allows for easy disassembly and cleaning. Wash with mild detergent and rinse thoroughly.
  • Suggested Temperature: The bottle is designed for water temperatures between -10°C and 70°C (-14°F and 158°F).
  • Avoid High Temperatures: Do not sterilize or steam boil the water cup, as this may cause deformation. Do not put it in a disinfection cabinet for disinfection.
  • Storage: After use, ensure the bottle is clean and dry before storing. Keep it in a dry place and away from children.
Image showing the bottle cap and wide bottle opening, indicating easy disassembly and cleaning
The bottle features easy disassembly and a wide mouth for convenient cleaning.

6. Troubleshooting

  • Plastic Taste/Odor: The product is made of lightweight polyethylene material and does not contain BPA, making it safe and non-toxic. If you receive the product with a slight odor, it is generated during the production process. Soaking in warm water (less than 70°C) for 12-24 hours while the lid is open can remove most of the odor. If not soaked, rinse thoroughly with clean water before use. For persistent odors, try cleaning with detergent, then pouring two spoonfuls of fresh milk into the cup, covering it with the lid, shaking it to make every corner of the cup come into contact with milk, and after one minute, pouring out the milk to clean the cup.
  • Folds/Wrinkles: The insulation layer of the kettle is made of square bottom foam material, which will naturally cause wrinkles when placed into the bottom of a circular bottle. This is not a problem with workmanship or quality.
  • Scratches: It is easy to scratch the vase body when using, and the black color is more noticeable. This is a normal characteristic of the material.

7. Specifications

Attribute Description
Type Cycling Water Bottle (TTI Bottle)
Model Numbers TB-650B, TB-650W, TB-750B, TB-750W
Material Lightweight Polyethylene (BPA-Free)
Capacity 650 ml, 750 ml
Color Black, White
Water Temperature Range -10°C to 70°C (-14°F to 158°F)
Size (TB-650) 205 x 65 mm
Net Weight (TB-650) 50g
Size (TB-750) 230 x 65 mm
Net Weight (TB-750) 100g
Origin Taiwan (China)
Detailed specifications table for Topeak water bottles
Detailed product specifications including capacity, dimensions, and material.
Dimensions for TB-650W model: 650ml capacity, 205x65mm size, 90g weight, white color
Specific dimensions and weight for the TB-650W model.

8. User Tips

  • Addressing Plastic Taste: If you notice a plastic taste, especially when the bottle is new or exposed to heat, follow the smell removal steps in the Troubleshooting section. Soaking with warm water or using milk can be effective.
  • Easy Access: The anti-slip coating on the bottle ensures easy access and a secure grip, even during intense activities.
  • Compatibility: The 6.5cm standard diameter ensures compatibility with most bicycle bottle cages.

9. Warranty & Support

For product support or inquiries, please contact the manufacturer or authorized representatives:

Manufacturer Information:

  • Name: Guangzhou Baiyi Trading Co., Ltd
  • Address: 211, No. 100 Qunxian Road, Dashi Street, Panyu District, Guangzhou City, Guangdong Province, China
  • Email: phospherus_cn@163.com
  • Telephone: +86 17724252100

EU Authorized Representative:

  • Company Name: VAT SPEED SL
  • Address: Calle Antonio Salvador N99.1, 28026 Madrid, Spain
  • Email: services@vatspeed-eu.com
  • Telephone: 34-916321624

A detailed user manual in PDF format is available for download. Please refer to the official product page or contact support for the link.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.