1. Introduction
This manual provides instructions for the installation, operation, and maintenance of your RACBOX LED Clearance Light. This product is designed as an auxiliary accessory for automotive lighting, intended for normal replacement and upgrade of original vehicle lights.
Intended Use: These LED signal lamps are suitable for various vehicles including trailers, trucks, caravans, lorries, and RVs. They can function as clearance lights, turn signal lights, brake lights, tail lights, strobe lights, license plate lights, day lights, additional brake lights, parking lights, and reverse lights.

2. Safety & Warnings
Please read all instructions carefully before using this product. Failure to follow these instructions may result in product damage or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture beyond its intended waterproof rating.
3. Installation Instructions
Follow these steps to install your LED Clearance Light:
- Turn off the vehicle engine and ensure the existing light is cool before beginning installation.
- Disconnect the power connector of the original signal light.
- Remove the old bulb or light assembly from its housing.
- Install the new LED signal light into the mounting position correctly.
- Connect the power plug properly. Refer to the wiring diagram below. If the light does not work after connection, reverse the plug polarity.
- Fix the light and driver securely to avoid vibration or noise during vehicle operation.
- Reinstall the light housing or cover.

4. Operation
After installation, test the light function to ensure normal operation. The lights are designed with high brightness wicks for enhanced visibility.

The lights feature dual-color illumination, typically available in White/Red or Yellow/Red combinations, depending on the specific model purchased. This allows for versatile signaling and warning functions.


Video 1: Product showcase demonstrating the LED signal lamp's features and appearance.
5. Maintenance
To ensure the longevity and optimal performance of your LED lights, follow these maintenance guidelines:
- Regularly clean the light lenses with a soft, damp cloth to remove dirt and debris.
- Avoid using abrasive cleaners or harsh chemicals, as these can damage the lens material.
- Periodically check the wiring connections for any signs of wear or corrosion and ensure they remain secure.
- Inspect the mounting hardware to ensure the lights are still firmly attached to the vehicle.
6. Troubleshooting
If you encounter issues with your LED Clearance Light, refer to the following common problems and solutions:
- Light does not illuminate:
- Check the power connection. Ensure wires are correctly connected according to the wiring diagram (Red for Red Light, White for White Light, Black for Negative).
- If connected correctly, try reversing the polarity of the power plug.
- Verify that the vehicle's power supply is active and providing the correct voltage (12V or 24V).
- Inspect for any damaged wiring or blown fuses in the vehicle's electrical system.
- Light flickers or is dim:
- Ensure all connections are tight and free from corrosion.
- Check for stable voltage supply from the vehicle.
- Excessive vibration or noise:
- Ensure the light and its driver are securely fixed to the mounting surface. Tighten all mounting screws and nuts.
7. Specifications
| Feature | Detail |
|---|---|
| Product Name | Signal Lamp |
| Model Name | 12V 24V LED side marker light |
| Item Type | Clearance Lights |
| Voltage | 12 V / 24 V |
| Emitting Color Options | White Red, Yellow Red |
| Origin | Mainland China |
| Package Length | 10 cm |
| Package Width | 10 cm |
| Package Height | 4 cm |
| Package Weight | 0.35 kg |

8. User Tips
- When installing, be mindful that the slot for housing the wires can be a bit small. Careful wire management will ensure a neat and secure installation.
- The lights are available in different color combinations, such as White/Red and Yellow/Red. Ensure you have the correct color combination for your specific application.
- These lights are versatile and can be used for various functions on different vehicles, including brake lights, caravan lights, RV lights, trailer lights, truck lights, and lorry lights.
9. Warranty & Support
This product meets relevant national automotive lighting industry standards and has undergone strict quality testing. For any support or inquiries, please contact the manufacturer or EU authorized representative:
- Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No.1489, Fanghua Road Baiyun Guangzhou. Email: tdlaccount@126.com
- EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND. Email: info@apex-ce.com
A user manual in PDF format is also available for download. Please refer to the product page for the link to the PDF document.