1. Introduction
This manual provides detailed instructions for the installation, setup, and operation of your MatSee Plus Tuya Smart ZigBee Energy Meter 80A with Clamp. This device allows you to monitor electricity usage (Voltage, Current, Power, KWh) via the Smart Life or Tuya Smart application, providing valuable insights into your energy consumption.
Figure 1: MatSee Plus ZigBee Energy Meter with CT Clamp and app display
2. Safety Information
WARNING: Failure to follow these instructions may result in death, serious injury, fire, electric shock, or damage to the Power Clamp and other property. Read all safety notices before using the Power Clamp.
2.1. Safety Installation
- The power clamp must be installed and serviced only by qualified electrical personnel.
- Do not touch the terminals of the device during testing.
- Turn off all power supply for this equipment before installing.
- Make sure that the power supply is off before connecting or disconnecting it to an auxiliary device.
- Always use a properly rated voltage sensing device to confirm power is off.
DANGER ELECTRIC SHOCK
2.2. Safety Handling
- Avoid high humidity or extreme temperatures.
- Avoid long exposure to direct sunlight or strong ultraviolet light.
- Do not drop or expose the unit to intense vibration.
- Do not disassemble or try to repair the unit on your own.
- Do not expose the unit or its accessories to flammable liquids, gases or other explosives.
2.3. Uninstalling the Clamp
WARNING: FOR SAFETY. If you need to remove the current transformer clamp, please be sure to turn off the power of the measuring device first, otherwise there is a risk of electric shock.
3. Specifications
| Feature | Specification |
|---|---|
| Input Voltage | AC 100-240V 50/60Hz |
| Measuring Range | 0.2-80A |
| Wireless Protocol | ZigBee |
| Wireless Frequency | WiFi 2.4Ghz (for gateway connection) |
| Device Dimensions | 50mm * 45mm * 23mm |
| CT Clamp Diameter | 10mm |
| Ambient Temperature Range | -10°C to +50°C |
| Certification | CE, RoHS |
| State of Assembly | Ready-to-Go |
| Compatibility | All Compatible (Tuya Smart, Smart Life) |
Figure 2: Device Dimensions
Figure 3: 35mm Din Rail Mounting
4. Setup & Installation
4.1. Wiring Diagram
Follow the diagram below for correct wiring. Ensure all power is OFF before proceeding with any wiring.
Figure 4: Wiring Diagram
Important Note: Please only put ONE wire (either live wire or neutral wire) into the current transformer clamp. Do NOT put both wires together, otherwise the reading value will be zero.
4.2. Download the App
The device operates with the Tuya Smart or Smart Life app. Ensure you have a Tuya ZigBee gateway already configured with the app before adding this ZigBee Meter.
- Scan the QR code provided in the product packaging or search for 'Smart Life' or 'Tuya Smart' in your device's App Store (iOS) or Google Play/Android Market.
- Download and install the app.
- Register or log in to your account.
Figure 5: App Download and Gateway Connection
4.3. Adding the Device to the App
- Ensure your ZigBee gateway is powered on and connected to the internet.
- Power on the ZigBee Energy Meter.
- Press and hold the reset button on the energy meter for approximately 5 seconds until the red LED light flashes quickly. This indicates the device is in pairing mode.
- Open the Smart Life or Tuya Smart app.
- Navigate to your ZigBee gateway and tap 'Add subdevice' or 'Add device'.
- The app will start discovering nearby devices.
- Once the 'Zigbee Digital Meter' is found and successfully added, tap 'Done'.
Video 1: Device Pairing Demonstration
5. Operating Instructions
Once the device is successfully added to the app and correctly wired, you can monitor your electricity usage in real-time.
- Open the Smart Life or Tuya Smart app and select your 'Zigbee Digital Meter'.
- The main screen will display real-time data including Voltage (V), Current (mA), and Power (W).
- Navigate through the app interface to view historical data, such as KWh usage over day, month, or year.
- The app also provides an 'Energy Saving' overview, showing usage and estimated costs over periods like the last 7 days, and daily average costs.
Figure 6: Real-time Monitoring Interface
Figure 7: Energy Consumption Overview
6. Maintenance
The MatSee Plus ZigBee Energy Meter is designed for low maintenance. Keep the device clean and free from dust. Do not use harsh chemicals or abrasive cleaners. Ensure the device is installed in a dry environment, away from direct sunlight and extreme temperatures, as outlined in the safety guidelines.
7. Troubleshooting
7.1. Q&A: App shows 'Device is power off'
Q: After I configure it with the App, why does the App show 'Device is power off'?
A: The app will only show the device is working if you have correctly placed a device's wire (either live wire or neutral wire, but NOT both) in the CT clamp, and the device connected to the clamp is turned on. The clamp needs to sense current flow to provide readings.
Figure 8: Correct CT Clamp Installation for Current Sensing
8. User Tips
- Wide Measurement Range: The device offers a broad measurement range (0.2-80A), making it suitable for monitoring various household appliances and circuits.
- Easy Assembly: Users have noted the product is easy to assemble, simplifying the installation process.
- Broad Compatibility: The meter is compatible with all devices within the Tuya Smart and Smart Life ecosystem, allowing for seamless integration into existing smart home setups.
9. Warranty and Support
For detailed warranty information and customer support, please refer to the official seller's website or contact their customer service directly. A comprehensive user manual in PDF format may also be available for download from the seller's product page or via this link: User Manual (PDF).