Bicycle Split Rest Handlebar Clip User Manual

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your riderace RN2012 Bicycle Split Rest Handlebar Clip. Designed for various bicycle types including BMX, Cruisers, Mountain Bikes, and Road Bicycles, this aluminum alloy handlebar extender offers enhanced comfort and aerodynamic positioning for long-distance riding and racing.

Figure 1: Assembled Bicycle Split Rest Handlebar Clip

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

• Warning: Keep the device and its cord out of reach of children under 3 years old.
• Keep away from children unless supervised by an adult.
• Do not use this product for purposes other than its intended use.
• Inspect the product before each use; do not use if damaged.
• Follow installation and operation guidelines to avoid injury.
• Handle with care to avoid cuts or injuries.
• Stop using immediately if the product is cracked, damaged or loose.

3. Package Contents

Please verify that all components are present in the package:

Figure 2: All components included in the package

• 2x Handlebar Extensions (Left and Right)
• 2x Elbow Pads (High-density sponge)
• 2x Mounting Clamps
• Mounting Hardware (screws, washers, shims)

4. Specifications

Figure 3: Product Dimensions

5. Setup & Installation

1. Confirm Compatibility: Confirm the specifications and size of the handlebar clip match your bicycle's handlebar diameter (25.4-31.8mm).
2. Install Components: Install the handlebar extensions and clamps according to the correct structure, ensuring firm fixation on your main handlebars.
3. Adjust Length: The arm rests are adjustable by up to 10cm. Adjust the length to suit your arm reach for optimal comfort and control. The extensions feature measurement markings for precise adjustment.


Figure 4: 10cm Arm Length Adjustment

4. Tighten Screws: Tighten all screws to standard torque. Do not over-tighten to avoid damaging components.
5. Final Check: After installation, check for idle running, noise, looseness, or interference. Ensure all parts are secure.

6. Operating Instructions

1. Pre-Ride Inspection: Before each ride, check the parts for any deformation, cracks, or damage. Ensure the high-density sponge pads are securely in place.


Figure 5: High-Density Sponge Pad

2. Avoid Impacts: Avoid strong impact, extrusion, or falling with the handlebar extensions.
3. Keep Clean: Keep the handlebar clip clean and free of mud for optimal performance and longevity.

7. Care & Maintenance

• Clean dust and mud regularly; keep dry.
• Avoid long-term exposure to sunlight, rain, high temperature.
• Replace parts immediately when worn to the limit.
• Check your bike regularly for overall condition.
• Clean, lubricate, and store in a dry and ventilated place for long-term storage.

8. Troubleshooting

If you encounter issues with your handlebar clip, consider the following:

• Looseness or Noise: Re-check all mounting screws and ensure they are tightened to standard torque. Verify that the clamp diameter is appropriate for your main handlebar.
• Interference: Ensure the extensions are positioned correctly and do not interfere with braking or shifting mechanisms. Adjust their position if necessary.
• Damage: If any part is cracked, deformed, or significantly worn, stop use immediately and replace the affected component.

9. User Tips

• Check Handlebar Shape: Ensure the clamps are suitable for your main handlebar's shape, especially if it's slightly flat, to ensure a secure fit.
• Proper Tightening: Always use a torque wrench if possible to ensure screws are tightened to the manufacturer's recommended specifications without over-tightening.
• Regular Inspection: Periodically check the handlebar extensions for any signs of wear, looseness, or damage, particularly before long rides.

10. Warranty & Support

For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is available for download. Please refer to the product page or contact customer support for the link: User Manual (PDF)

11. Disclaimer

• This product is for auxiliary use only.
• The user is responsible for their own safety during riding.
• The manufacturer shall not be liable for accidents caused by improper use, installation, or negligence.