arikasen A6 Small Bluetooth Headphones

Contents

Arikasen A6 Small Bluetooth Headphones User Manual

Model: A6 | Brand: Arikasen

Introduction

Thank you for choosing the Arikasen A6 Small Bluetooth Headphones. These headphones are designed for comfort and portability, offering a superior sound experience with Bluetooth 5.0 connectivity. This manual provides essential information for safe and effective use, including setup, operation, maintenance, and troubleshooting.

Package Contents

Please check the box for the following items:

  • Arikasen A6 Bluetooth Headphones
  • User Manual (this document)
  • Carrying Bag
  • Charging Cable (USB-C)
  • Replaceable Pads Set
Arikasen A6 Bluetooth Headphones and included carrying case
Arikasen A6 Bluetooth Headphones with its portable carrying case.
Portable Carrying Case for headphones
The portable carrying case helps protect your headphones when not in use.

Safety Instructions

To ensure safe operation and prolong the life of your headphones, please observe the following:

  • Do not disassemble, collide, squeeze, or throw the product into fire.
  • If the battery shows serious bloating, discontinue use immediately.
  • Avoid placing the headphones in high-temperature environments.
  • Do not listen at excessively high volumes for extended periods to prevent hearing damage.
  • Do not use headphones while driving or in situations where awareness of surroundings is critical.
  • Clean the headset with a dry, soft cloth. Avoid immersing the headset in water, as this may cause damage.
  • If you experience any discomfort, irritation, or adverse reactions while using the headphones, stop using them immediately.
  • Improper storage or use can reduce battery life.

Setup

1. Charging the Headphones

Before first use, fully charge your headphones. The headphones use a USB-C charging port, allowing for convenient charging with most modern mobile chargers.

  • Connect the provided USB-C charging cable to the charging port on the headphones.
  • Connect the other end of the cable to a USB power source (e.g., computer USB port, wall adapter).
  • The charging indicator light will show the charging status. Once fully charged, the indicator will change or turn off.

2. Power On/Off

  • Power On: Long press the power button for approximately 2 seconds until the indicator lights up.
  • Power Off: Long press the power button until the indicator light turns off.

3. Bluetooth Pairing

To connect your headphones to a device:

  1. Ensure the headphones are powered off.
  2. Long press the power button until the red and blue lights flash alternately. This indicates pairing mode.
  3. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
  4. Select "A6" from the list of found devices.
  5. Once successfully paired, only the blue light will remain on.
Video demonstrating the pairing process and basic controls (volume, track, play/pause).

4. Connecting a Second Phone

The headphones support connecting to two phones simultaneously. Refer to the original user manual PDF for detailed instructions on this feature.

Operating Instructions

1. Wearing the Headphones

The A6 headphones feature a neckband style with semi-open earcups and soft foam pads for comfort. Position the earcups over your ears, ensuring a comfortable and secure fit. The flexible design allows for easy adjustment.

Diagram showing comfortable on-ear fit compared to painful in-ear and heavy over-ear headphones.
The semi-open, on-ear design provides a comfortable fit, reducing pressure on the ears.

2. Headphone Controls

The headphones feature integrated control buttons for easy management of audio and calls:

  • Volume Up: Press the '+' button.
  • Volume Down: Press the '-' button.
  • Next Track: Press the '▶▶' button.
  • Previous Track: Press the '◀◀' button.
  • Play/Pause: Press the central button (often marked with a phone icon or music note).
  • Answer/Hang Up Call: Press the central button during an incoming call.
  • Last Number Redial: Double-press the central button.
  • Voice Assistant: The headphones support Amazon Alexa, Apple Siri, and Google Assistant. Activate via the central button (specific activation method may vary by device).

3. Language Switch

The headphones may support a language switch function. Refer to the original user manual PDF for specific instructions on how to change the voice prompt language.

4. Factory Reset

If you encounter persistent issues, a factory reset may resolve them. Refer to the original user manual PDF for specific instructions on performing a factory reset.

Maintenance

  • Cleaning: Use a dry, soft cloth to clean the headphones. Do not use harsh chemicals or abrasive materials.
  • Storage: When not in use, store the headphones in the provided carrying bag to protect them from dust, scratches, and impacts. Avoid storing in extreme temperatures.
  • Battery Care: To maintain optimal battery life, avoid fully discharging the headphones frequently. Charge them regularly, even if not in constant use.

Troubleshooting

  • Headphones not turning on: Ensure the headphones are fully charged.
  • Cannot pair with device: Make sure the headphones are in pairing mode (red and blue lights flashing). Turn off and on Bluetooth on your device, then try pairing again. Ensure the headphones are not already connected to another device.
  • No sound or low volume: Check the volume levels on both the headphones and your connected device. Ensure the headphones are properly paired.
  • Intermittent connection: Ensure your device is within the maximum wireless range (10-20m) and there are no significant obstacles between the headphones and the device. Try re-pairing the headphones.
  • Poor call quality: Ensure the microphone is not obstructed. Check your device's network signal.

Specifications

Feature Specification
Brand Namearikasen
ModelA6
MaterialPlastic
StyleNeckband
Earcups TypeSemi-open
Headphone Pads MaterialSoft Foam
Wireless TypeBluetooth
Bluetooth Version5.0
Maximum Wireless Range10m-20m
CommunicationWireless
ConnectorsUSB (Type-C confirmed by users)
Vocalism PrincipleDynamic
Number Of Drivers2
Driver Diameter27mm
Magnet TypeNeodymium
Frequency Response Range20 - 20000Hz
Impedance Rangeup to 32 Ω
Resistance32ΩΩ
Sensitivity93±3dBdB
Max Output50mW
Total Harmonic Distortion5%
CodecsAAC, sbc
Battery life up to11-14 hours
Charging MethodCable
Line Length0.3mm (Charging Cable)
With MicrophoneYes
Volume ControlYes
Control ButtonYes
Voice Assistant Built-inYes (Amazon Alexa Support, Apple Siri Support, Google Assistant Support)
Sound IsolatingNo
WaterproofYes
Support APPNo
CertificationCE, FCC
OriginMainland China
Diagram of headphone driver showing 18mm size.
The headphones feature a dynamic driver for superior sound and deeper bass.
Bluetooth 5.0 compatibility with various operating systems.
Bluetooth 5.0 ensures stable connection and high-quality stereo sound, compatible with most Bluetooth devices.

User Tips

  • Comfortable Fit: The flexible neckband and soft foam ear pads are designed for extended wear, even during activities. Users report a good fit that is not too rigid.
  • Excellent Call Quality: The built-in microphone provides clear sound during phone calls.
  • Long Battery Life: Enjoy up to 11-14 hours of playtime on a single charge. For example, using the headphones for 2 hours a day means you might not need to charge for a whole week.
  • USB-C Charging: The modern USB-C port allows for convenient charging with common mobile phone chargers.
  • Loud Sound: The headphones deliver strong and loud audio. Be mindful of volume levels in public spaces to avoid disturbing others.
Woman wearing headphones, indicating 11 hours of playtime.
Enjoy extended listening sessions with up to 11 hours of playtime.

Frequently Asked Questions (FAQ)

  • Q: Is this product waterproof?
    A: Yes, the Arikasen A6 headphones are waterproof.
  • Q: What type of charging port does it have?
    A: The headphones feature a USB Type-C charging port.
  • Q: Does it have FM radio functionality?
    A: No, FM radio functionality is not listed as a feature for these headphones.
  • Q: How do I change the language of the voice prompts?
    A: Specific instructions for changing the language are typically found in the detailed user manual PDF. Please refer to that document for guidance.

Warranty & Support

For detailed warranty information, technical support, or further assistance, please refer to the comprehensive user manual PDF provided by the manufacturer. This document contains in-depth instructions and contact information for support.

You can view the official user manual PDF for more detailed guides and information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.