XHDATA D-219 Portable AM/FM/SW Radio Receiver User Manual

Introduction

Thank you for purchasing the XHDATA D-219 Portable AM/FM/SW Radio Receiver. This compact and versatile radio is designed for easy operation and excellent reception across multiple frequency bands. This manual provides essential information for setting up, operating, and maintaining your device to ensure optimal performance and longevity.

Safety Precautions

• Do not use any abrasive powder to clean the cabinet. Wipe it with a soft cloth moistened with a mild soap and water solution.
• The device must be protected from burning and impact.
• Do not leave the unit in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock.
• If the sound becomes low or distorted, replace all the batteries with new ones. Do not use old and new batteries together.
• If the set is not used for a long time, remove all the batteries to prevent possible battery leakage.

Package Contents

Please check that all items are present in your package:

• 1 x XHDATA D-219 Radio (Sliver/Gray, or other color depending on purchase)
• 1 x Instruction Manual

Product Overview

Familiarize yourself with the main components and controls of your XHDATA D-219 radio:

Function of Keys and Ports:

1. Antenna
2. DC Jack (5V)
3. Earphone Jack
4. Power On/Off Switch
5. Tuning Knob
6. Volume Button
7. Band Selector (FM/AM/SW1-9)
8. Power Light

Setup

Battery Installation

The XHDATA D-219 is powered by two AA batteries (UM3 AA 1.5V X2).

1. Locate the battery compartment on the back of the radio.
2. Open the battery compartment cover.
3. Insert two AA batteries, ensuring correct polarity (+ and -).
4. Close the battery compartment cover securely.

Note: If the radio will not be used for an extended period, remove the batteries to prevent leakage.

Powering On

To turn on the radio, slide the Power On/Off switch (4) to the 'ON' position. The Power Light (8) will illuminate.

Operating Instructions

Adjusting Volume

Use the Volume button (6) to adjust the sound level to your preference.

Listening to FM Radio

The radio supports two FM bands: FM1 (87-108 MHz) and FM2 (64-87 MHz).

1. Slide the Band Selector switch (7) to select either FM1 or FM2.
2. Rotate the Tuning Knob (5) to find your desired FM station.

Listening to AM/SW Radio

The radio supports AM (522-1620 KHz for 9K step, 520-1710 KHz for 10K step) and Shortwave (SW1-9, 4.75-22.0 MHz) bands.

1. Slide the Band Selector switch (7) to select AM or one of the SW bands (SW1-9).
2. Rotate the Tuning Knob (5) to find your desired station.

Antenna Usage for Optimal Reception

• For AM reception: The receiver uses an internal antenna. For best reception, rotate the entire radio unit until the signal is clear.
• For FM/SW reception: Fully extend the telescopic antenna (1) and rotate it for the best signal reception. The 360° flexible rotating long antenna (approximately 55cm/22 inches) helps in achieving better signal reception.

Using Earphones

To listen privately, plug standard 3.5mm earphones into the Earphone Jack (3).

Product Video Overview

Specifications

Maintenance

To keep your XHDATA D-219 radio in good condition:

• Clean the cabinet with a soft cloth moistened with a mild soap and water solution. Do not use abrasive powders or harsh chemicals.
• Avoid exposing the radio to extreme temperatures, direct sunlight, excessive dust, or moisture.
• If the unit will not be used for an extended period, remove the batteries to prevent potential damage from battery leakage.

Troubleshooting

No Sound or Distorted Sound

• Check the volume level and ensure it is not set to minimum.
• Replace the batteries with new ones. Low or old batteries can cause low or distorted sound.
• Ensure the antenna is properly extended and rotated for optimal reception, especially for FM and SW bands.
• Try tuning to a different station or band to see if the issue persists.

Radio Not Turning On

• Check if the batteries are inserted correctly with the right polarity.
• Replace the batteries with fresh ones.
• If using a DC adapter (not included), ensure it is properly connected and providing the correct voltage (DC 5V).

User Tips

• The radio offers excellent sensitivity across all its bands, making it effective for various listening environments.
• Its small size and portability make it ideal for both indoor use (e.g., bedroom, kitchen) and outdoor activities like camping or traveling.
• The shortwave bands are divided into multiple sections, which can make it easier to fine-tune and avoid skipping over stations compared to radios that cover the entire spectrum in one sweep.
• The speaker provides clear sound quality and sufficient volume for personal listening.
• The D-219 model with AM up to 1730 KHz features 1 KHz tuning steps, allowing for precise station selection.

Frequently Asked Questions (FAQ)

Q: Does this radio support single-sideband modulation (SSB)?

A: Based on the available specifications, this model primarily supports AM, FM, and SW bands. SSB modulation is not listed as a feature.

Q: Does the radio have a clock function?

A: No, the specifications do not indicate a built-in clock function for the XHDATA D-219.

Q: What size DC jack is required for this radio?

A: The radio requires a DC 5V/300mA input. While the specific physical dimensions of the DC jack are not provided, it uses a standard barrel jack type. Please ensure any adapter used matches these voltage and current requirements.

Q: Can this radio receive amateur radio broadcasts?

A: The radio covers Shortwave (SW) bands from 4.75-22.0 MHz, which includes some frequencies used by amateur radio operators. Reception quality may vary depending on location, time of day, and atmospheric conditions.

Warranty and Support

For detailed warranty information, specific terms and conditions, or further technical support, please refer to the complete user manual available as a PDF document. You can typically find this document on the manufacturer's website or by contacting customer service.

A PDF version of the user manual is available here.