1. Introduction
Thank you for choosing the TOWILD BR800 Bicycle Light. This high-performance headlight is designed for professional night riding, offering up to 800 lumens of brightness, multiple lighting modes, and a durable, waterproof design. Please read this manual carefully before use to ensure proper operation and maintenance.

Image 1: TOWILD BR800 Bicycle Light Overview. The light is shown mounted below a bike computer on handlebars, highlighting its 800 lumens output and replaceable battery feature.
2. Package Contents
Please check the package for the following items:
- TOWILD BR800 Bicycle Headlight
- Rechargeable 18650 Battery (2000mAh or 2600mAh, depending on variant)
- Handlebar Mount
- Gopro Mount Adapter
- USB Type-C Charging Cable
- User Manual

Image 2: Package Contents. This image displays all items included in the TOWILD BR800 box: the BR800 light unit, a 2000mAh 18650 battery, a GoPro mount, a standard handlebar mount, a USB charging cable, and the user manual.
3. Setup and Installation
3.1 Battery Installation
- Unscrew the rear cap of the BR800 light unit.
- Insert the 18650 rechargeable battery with the positive (+) terminal facing towards the front of the light (towards the LED).
- Securely screw the rear cap back on.
3.2 Mounting the Light
The BR800 can be mounted using the included handlebar mount or adapted for GoPro mounts.
- Handlebar Mount: Attach the handlebar mount to your bicycle's handlebar. Ensure it is securely fastened. The light unit can then be slid onto the mount until it clicks into place.
- GoPro Mount: If using a GoPro mount, attach the provided adapter to the light unit. This allows for quick release and rotation to adjust the beam's cut-off line correctly.
Note: When combining with a bike computer using a GoPro mount, the light can be quickly released and rotated to ensure the cut-off line is in the correct position for optimal visibility and to avoid dazzling oncoming traffic.
4. Operating Instructions
4.1 Power On/Off
- To Turn On: From the off state, press the power button once.
- To Turn Off: Press and hold the power button for approximately 1-2 seconds.
4.2 Changing Modes
The BR800 features both steady and flashing modes.
- Steady Modes: Briefly press the power button to cycle through Low, Middle, and High brightness levels.
- Flashing Modes: Press and hold the power button (for approximately 1-2 seconds) to switch between steady and flashing modes. Once in flashing mode, briefly press the power button to cycle through Night Warning and Day Warning flash patterns.
4.3 Power Display
The indicator light on the top of the unit shows the battery status:
- Green Light: Battery level is between 100% and 10%.
- Red Flashing Light: Battery level is below 10% (low warning). Please charge the light as soon as possible.
4.4 Smart Mode (Vibration Wake-up)
The BR800 may feature a smart mode that activates the light upon detecting vibration (e.g., when you start riding). Refer to the power button sequence or specific indicator for smart mode activation if available.

Image 3: Lighting Modes and Technical Parameters. This diagram illustrates the BR800's beam pattern extending 500 feet and provides a detailed table of lighting modes (Low, Middle, High) with corresponding brightness (200LM, 400LM, 800LM) and runtimes for 2000mAh and 2600mAh batteries. It also lists flash modes (Night Warning, Day Warning) with their brightness, frequency, and runtimes.
5. Charging
The BR800 is equipped with a USB Type-C charging port.
- Locate the USB Type-C port on the light unit (usually covered by a rubber flap).
- Connect the provided USB Type-C cable to the light and the other end to a USB power source (e.g., computer, USB wall adapter).
- The indicator light will show charging status (e.g., red while charging, green when fully charged).
- Once fully charged, disconnect the cable and ensure the rubber flap covers the port to maintain water resistance.
6. Maintenance
- Cleaning: Wipe the light body with a soft, damp cloth. Do not use abrasive cleaners or solvents. Keep the lens clean for optimal light output.
- Storage: If storing for an extended period, charge the battery to about 50-80% and store in a cool, dry place. Recharge every 3-6 months to maintain battery health.
- Water Resistance: The BR800 is IPX6 waterproof. Ensure the USB port cover is securely closed to maintain water resistance. Do not submerge the light in water.

Image 4: IPX6 Waterproof Design. The BR800 light is shown with water droplets on its surface, illustrating its IPX6 water resistance, making it suitable for use in various weather conditions.
7. Troubleshooting
- Light Not Turning On:
- Check if the battery is correctly installed and fully charged.
- Ensure the battery cap is securely tightened.
- Light Output is Dim:
- The battery may be low; recharge it.
- Clean the lens if it's dirty.
- Light Not Charging:
- Check the USB cable and power source.
- Ensure the charging port is clean and free of debris.
8. Specifications
| Feature | Specification |
|---|---|
| Model | BR800 |
| Max Brightness | 800 Lumens |
| Material | Aluminum Alloy |
| Waterproof Level | IPX6 |
| Power Source | 18650 Rechargeable Battery |
| Charging Port | USB Type-C |
| Impact Resistance | 1.5 Meter Fall Resistant |
| Dimensions (Approx.) | 3.94in (Length) x 1.18in (Width) x 1.18in (Height) |
| Certifications | CE, FCC, RoHS |

Image 5: Product Dimensions and Key Features. This image provides the physical dimensions of the BR800 light and highlights its main features through icons: Max 800 Lumens, Handlebar/Gopro mount, Cut-off line anti-glare design, Type-C Charging, IPX6 Waterproof, and 1.5 Meter Fall Resistant. It also mentions CE, FCC, ROHS certifications and aluminum alloy material.
9. User Tips
- Battery Check: Some users reported batteries arriving discharged. It's good practice to fully charge the battery before first use.
- Mounting Versatility: The light is compatible with both standard handlebar mounts and GoPro mounts, offering flexibility for different setups.
- Brightness: Users praise the powerful illumination, noting it "really lights up the road."
- Wahoo/Garmin Mounts: The light/mount can typically be used with Wahoo/Garmin mounts, allowing it to be positioned above the bike computer and below the light for an integrated setup.
10. Warranty and Support
TOWILD products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included in your package or contact your retailer. Keep your proof of purchase for warranty claims.
Warning: This is a high-brightness product. Do not look directly into the light source to avoid vision damage.