1. Introduction
Thank you for choosing the TiESFONG 360 3CH GPS Dash Cam. This device is designed to provide comprehensive video surveillance for your vehicle, recording from the front, cabin, and rear simultaneously. Please read this manual thoroughly before use and keep it for future reference to ensure proper operation and maintenance.
For detailed instructions and diagrams, you may also refer to the official user manual PDF: TiESFONG Multi-Channel Dash Cam User Manual (PDF)
2. Package Contents
Please check the box for the following items:
- A7WB-Host (Main Dash Cam Unit)
- S20G Rear Camera
- CPL Filter
- OBD/P7 Power Cable (or Car Charger Cable)
- SD Card (e.g., 64GB or 128GB, depending on package)
- User Manual (this document)
- 3M Stick Bracket
- Electrostatic Stickers
- Pry Bar
- Screen Cleaning Paper

Image: Contents of the TiESFONG Dash Cam package, including the main unit, rear camera, CPL filter, power cable, SD card, and user manual.
3. Product Overview
3.1 Camera Details
| No. | Name | Description |
|---|---|---|
| 1 | POWER | Type-C USB port for power on |
| 2 | TF Card Slot | For inserting TF Card (Micro SD Card) |
| 3 | Rear Cam Port | 2.5mm Round hole interface for connecting with Rear Cam |
| 4 | Up Button | Navigation/Function button (see Basic Operation) |
| 5 | Menu Button | Navigation/Function button (see Basic Operation) |
| 6 | Down Button | Navigation/Function button (see Basic Operation) |
| 7 | OK Button | Confirm/Function button (see Basic Operation) |
| 8 | Status Indicator | Blue light always bright: Powered on (not recording). Blue light blinking: Recording in progress. |
| 9 | Screen Protector | Please tear off when using |
| 10 | Cam Protector | Please tear off when using |
3.2 Key Features
- 3-Channel Recording: Simultaneously captures video from the front (1440P/140°), cabin (1080P/170°), and rear (1080P/140°).
- Built-in Radar Detection: 360° radar for parking monitoring, detecting movement from front and backside.
- GPS Tracking: Accurately logs driving speed, location, and routes. Viewable via app or GPS Player.
- Wi-Fi Connectivity: Free app for live preview, playback, download, editing, and sharing.
- IR Night Vision: Enhanced low-light recording for the cabin camera.
- WDR (Wide Dynamic Range): Improves image quality in varying light conditions.
- CPL Filter Support: Reduces reflections and enhances contrast for the front camera.

Image: Front view of the TiESFONG Dash Cam highlighting 3-channel recording, built-in radar, IR+WDR, GPS, 2K resolution, and 170-degree cabin view.

Image: Diagram illustrating 3-channel recording with front (1440P/140°), cabin (1080P/170°), and rear (1080P/140°) cameras providing all-around protection.

Image: Comparison of 140° normal cabin view versus 170° wide-angle cabin view, showing increased coverage of the car interior.

Image: Visual representation of the built-in 360° radar detection system, showing its ability to detect movement from the backside and frontal areas for parking monitoring.

Image: Demonstration of the CPL filter's effect on the front camera, showing how it effectively reduces reflections, enhances contrast, and boosts saturation in video recordings.

Image: Illustration of the built-in WiFi and GPS tracking features, showing how the dash cam connects to a smartphone app for live preview, playback, download, and GPS route tracking on maps.
4. Setup Instructions
4.1 Memory Card Installation
- Ensure the dash cam is powered off.
- Insert a new TF (Micro SD) card (Class 10, U3 or above, 64GB-256GB recommended) into the card slot until it clicks.
- Power on the recorder.
- Access the Menu Interface by pressing the 'M' button.
- Navigate to 'Format Card' using the navigation buttons and press 'OK'.
- Select 'YES' to confirm formatting. A yellow frame indicating 'Formatting Card' will appear. Wait for the process to complete.
- Once formatted, the yellow frame will disappear. The dash cam will automatically start recording.
4.2 Mounting the Dash Cam
- Suggested Location: For the main unit, behind the rearview mirror on the front windshield. For the rear camera, in the middle of the rear windshield.
- Apply Electrostatic Sticker: Choose a clean, flat spot on your windshield. Wipe the area with screen cleaning paper. Peel off the protective film from the electrostatic sticker and apply it to the chosen spot. Use a scraper to remove any air bubbles.
- Install the Bracket: Push the 3M Stick Bracket into the bracket slot of the dash cam holder from right to left until it clicks.
- Attach Dash Cam: Peel off the red protective film from the 3M Stick Bracket. Attach the bracket (with dash cam) to the electrostatic sticker. Press firmly for 10-20 seconds to ensure a secure fit.
4.3 Power Connection
- Car Charging Cable: Plug the car charger into your car's cigarette lighter port. Use the pry bar to carefully route the power cord along the edge of the windshield and hide it. Connect the Type-C USB end to the power port of the dash cam.
- Hardwire Kit (for 24H Parking Monitor): If using the OBD/P7 Power Cable for 24-hour parking monitoring, refer to the 'TIESFONG Hardwire Kit With Radar User Guide' for detailed wiring instructions. This typically involves connecting to your car's fuse box.
- Start your car; the dash cam will auto power on and start recording.
4.4 Rear Camera Installation
- Ensure the 4/5-pin connector between the Rear Lens Cable and Power Cable is fully connected.
- Insert the 2.5mm round hole interface of the rear lens cable into the Rear Lens interface on the main dash cam unit.
- Use the pry bar to route the rear camera cable along the gap in the roof lining and hide it towards the rear windshield.
- Confirm the desired position for the rear lens. Peel off the protective film from the rear lens's 3M Stick Bracket and firmly attach it to the rear windshield.
5. Operating Instructions
5.1 Power ON/OFF
- Automatic: When your car starts, the dash cam will automatically power on and begin recording.
- Manual: Long press the Power button to manually power the device ON or OFF.
- Automatic Power Off: The recorder will power off if the charger cable is disconnected or the car's ignition is turned off.
5.2 Recording Interface & Key Functions
The display modes vary depending on whether the rear camera is connected.
- Short Press Up/Down Buttons: To switch between different lens views (e.g., Front, Left, Right, Rear, or combinations).
- Short Press Menu Button: Enters the menu function settings. Long press enters playback mode.
- Short Press OK Button: Starts/stops recording. Long press turns Wi-Fi ON/OFF.
- Short Press Power Button: Turns the screen ON/OFF. Long press powers the device ON/OFF.
5.3 Menu Settings
To access and navigate the menu settings:
- From the recording interface, press the 'M' button to enter the Menu Interface.
- Use the Up/Down buttons to navigate through menu options (e.g., Wi-Fi, IR LED, Loop Recording, G-sensor, Language, Screen Saver, Clock Settings, Format Card, Reset Setup).
- Press 'OK' to select an option or enter a sub-menu.
- Use Up/Down buttons to adjust settings within a sub-menu, then 'OK' to confirm.
Key Menu Options:
- Wi-Fi: ON/OFF. Enables/disables the dash cam's Wi-Fi hotspot for app connection.
- IR LED: ON/OFF/Auto. Controls infrared night vision for the cabin camera. 'Auto' is recommended.
- Loop Record: 1min/2min/3min. Sets the duration of video segments. When the memory card is full, the oldest files are overwritten.
- G-Sensor: OFF/High/Middle/Low. Detects sudden impacts or movements. If triggered, it locks the current video file to prevent overwriting.
- Language: Select your preferred display language.
- Screen Saver: OFF/1min/3min/Off-screen recording. Sets when the screen turns off to save power.
- Format Card: Erases all data on the SD card. Back up important files before formatting.
- Reset: Restores all settings to factory defaults.
5.4 Playback
To view recorded videos and photos on the dash cam:
- From the recording interface, long press the 'M' button to enter the playback interface.
- Use the Up/Down buttons to navigate through video/photo files.
- Press 'OK' to play a selected video or view a photo.
- During playback, use the 'M' button to access playback options (Volume, Video Type, Camera ID, Delete, Protect).
5.5 Wi-Fi Function & App
The dash cam can connect to your smartphone via Wi-Fi for live view, playback, download, and settings management.
- Download App: Scan the QR code in the manual or search for