1. Introduction
Thank you for choosing the MARPOU 50CM Large LED Ceiling Lamp. This ultrathin light fixture is designed to provide versatile lighting for various rooms, including kitchens, dining rooms, bedrooms, foyers, studies, and bathrooms. It features smart control options via a dedicated mobile application and a remote control, offering adjustable color temperature and brightness for dimmable models.

Figure 1.1: MARPOU 50CM Large LED Ceiling Lamp with Smart APP and Remote Control
Video 1.1: Product overview, unboxing, and installation demonstration.
2. Setup and Installation
Before installation, ensure the power supply is turned off at the main circuit breaker to prevent electric shock. It is recommended to have a qualified electrician perform the installation.
2.1 Package Contents
Upon opening the package, verify that all components are present and undamaged:
- LED Ceiling Lamp unit (50cm diameter)
- Mounting Base
- Remote Control (for dimmable models)
- Instruction Manual
- Mounting Hardware (screws, anchors)

Figure 2.1: Product Upgrade - New Model 2.0 features an improved lamp frame and mounting base for easier installation.
2.2 Installation Steps
Follow these steps to install your ceiling lamp:
- Connect Cable: Securely connect the electrical cables from your ceiling to the lamp's wiring. Ensure correct polarity (Live, Neutral, Ground if applicable).
- Diagonal Installation: Align the lamp's mounting base with the pre-drilled holes in the ceiling. Secure the base using screws, ensuring it is firmly attached.
- Rotate Installation: Once the base is secured and wiring connected, attach the lamp body to the mounting base. Rotate the lamp body until it locks securely into place.

Figure 2.2: Installation Display and Control Modes Overview.
3. Operating Instructions
Your MARPOU LED Ceiling Lamp offers multiple control methods depending on the model (dimmable or non-dimmable).
3.1 Remote Control (Dimmable Models Only)
The remote control allows for comprehensive adjustment of your lamp's settings.
| Button | Function |
|---|---|
| ON | Turn the light ON |
| OFF | Turn the light OFF |
| Brightness+ / Brightness- | Adjust brightness level |
| CCT-- / CCT+ | Adjust 3 color temperature modes (Warm White, Neutral White, Cold White) |
| Night mode | Sets brightness to 20% and CCT to 4000K |
| Timing | 60s delay light off |
| Match code / Clean code | Pairing and unpairing the remote with the lamp |
| Brightness:50% | Sets brightness to 50% |
| No function | Indicates a button with no assigned function |

Figure 3.1: Remote Control for Dimmable Models, showing CCT and Brightness adjustment.
3.2 APP Control (Dimmable Models Only)
For smart functionality, download the 'LampSmart Pro' app and follow these steps:
- Download APP: Scan the QR code or search for "LampSmart Pro" in your device's app store (IOS App Store or Android Google Play Store).
- Switch Display Language: Open the app and select your preferred language.
- Click to Add Device: Follow the in-app prompts to add a new device.
- Set a Name for the Device: Assign a unique name to your lamp for easy identification.
- Turn on the Phone's Bluetooth: Ensure your phone's Bluetooth is enabled for the app to detect the lamp.
- The Device is Added: Once detected, confirm adding the device.
- Can Now Be Adjusted: You can now control the lamp's features via the app.
3.3 Switch Control (All Models)
All models can be controlled using a standard wall switch. Non-dimmable models will cycle through Natural light, Cold white, and Warm white with successive toggles of the switch.

Figure 3.2: Different light temperatures available (Cold white, Natural light, Warm white).
4. Maintenance
To ensure the longevity and optimal performance of your LED ceiling lamp, follow these maintenance guidelines:
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the lamp. Avoid abrasive cleaners, solvents, or harsh chemicals, as they may damage the finish or electrical components.
- Bulb Replacement: This lamp uses integrated LED bulbs which are not user-replaceable. If the LEDs fail, the entire fixture may need replacement.
- Regular Checks: Periodically check the mounting hardware to ensure the lamp remains securely attached to the ceiling.
- Environmental Conditions: Avoid installing the lamp in areas with extreme temperatures or high humidity, which can affect its lifespan.
5. Troubleshooting
If you encounter issues with your MARPOU LED Ceiling Lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on | No power supply; Loose wiring; Faulty switch/remote | Check circuit breaker. Ensure wiring is secure. Test with a different switch or remote. |
| Remote control not working | Batteries dead; Not paired; Obstruction | Replace remote batteries. Re-pair remote (refer to 'Match code' in section 3.1). Ensure clear line of sight. |
| APP control not working | Bluetooth off; Device not added; App issue | Ensure phone Bluetooth is on. Follow APP connection steps (section 3.2). Restart app/phone. |
| Light flickers or dims unexpectedly | Unstable power; Incompatible dimmer (if applicable); Loose connection | Check power supply stability. Ensure dimmer is compatible with LED. Inspect wiring connections. |
| Cannot change color temperature/brightness | Non-dimmable model; Remote/App issue | Verify if your model is dimmable. Use remote/app troubleshooting steps. |
6. Specifications
| Attribute | Value |
|---|---|
| Brand Name | MARPOU |
| Model Number | XD-1006 |
| Item Type | Ceiling Lights |
| Power Source | AC |
| Voltage | 90 - 260 V |
| Watts | 48W |
| Size | 20 inch (50cm) diameter, 0.9 inch (2.3cm) thickness |
| Lumen | 5280lm (as per product image, test report shows 3848.8 lm) |
| Light Area | 30-40m² |
| Shell Color Options | Black / White |
| Light Source | LED bulbs (included) |
| Number of Light Sources | > 20 |
| Material | PP/Plastic (Body Material: PC, PVC, Plastic) |
| Finish | Frosted |
| Technics | Painted |
| Installation Method | Surface mounted, Self-Contained |
| Is Smart Device | Yes (App/Remote Control) |
| Is Dimmable | Yes (App/Remote/Switch Control for dimmable models) |
| Certification | CE, ROHS |
| Package Weight | 2.26 kg |
| Package Dimensions | 55cm (L) x 55cm (W) x 6cm (H) |

Figure 6.1: Detailed Product Parameters.
7. User Tips
- Check Package Contents: Upon receiving your lamp, carefully inspect the package and its contents to ensure everything is intact and accounted for before beginning installation.
- Verify Mounting Compatibility: If replacing an existing fixture, compare the new lamp's mounting base design with your current setup to ensure compatibility. Product designs can evolve, so confirm the new mounting method suits your needs.
- Smart Home Integration: The lamp is a smart device with APP and Remote Control. For voice control, check the 'LampSmart Pro' app for integration options with smart home assistants like Alexa.
8. Warranty and Support
The MARPOU 50CM Large LED Ceiling Lamp comes with a 1-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
For further assistance, detailed instructions, or to download the full user manual in PDF format, please refer to the official product documentation available at: User Manual (PDF).
For technical support or service inquiries, please contact your retailer or the manufacturer directly.