AUTOXBERT Corsa Mk3 D / Mk4 E

Contents

AUTOXBERT Side Wing Mirror Glass Instruction Manual

For Opel Vauxhall Corsa Mk3 D (2006-2014) and Mk4 E (2014-2019)

1. Product Information

This manual provides instructions for the AUTOXBERT replacement side wing mirror glass, designed for specific Opel Vauxhall Corsa models.

  • Product Name: Car Mirror Glass
  • Brand: AUTOXBERT
  • Model Name: For Corsa D mirror glass (Compatible with Opel Vauxhall Corsa Mk3 D and Mk4 E)
  • Model Year Compatibility: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
  • Item Type: Mirror & Covers
  • Material: Glass
  • Features: Convex
  • Attachment Type: Self-Adhesive
  • Items Included: Replacement mirror glass supplied with adhesive
  • Type: Standard Mirror Assembly
  • Origin: Mainland China
Two replacement side mirror glasses with a small image of an Opel Corsa car.

Image: AUTOXBERT Side Wing Mirror Glass for Opel Vauxhall Corsa.

2. Safety & Warnings

SAFETY FIRST:

  • Disconnect the Vehicle Battery: Before any work, disconnect the negative (-) terminal. This prevents electrical shorts, potential damage to vehicle control modules, and airbag system risks.
  • Work in a Safe Area: Park on a level surface, engage the parking brake, and work in good lighting.

3. Installation Instructions

Step 1: Removing the Old Mirror Glass

  1. Adjust the mirror face to its maximum inward tilt (pointing towards the vehicle window). This provides the best access behind the glass.
  2. Gently insert your fingers or a plastic pry tool behind the lower outer edge of the mirror glass.
  3. Apply steady, firm pressure outwards and backwards (away from the housing). You should hear a series of clicks/pops as the plastic clips release.
  4. Work your way around the edge until the entire glass is free. DO NOT use excessive force or pry from the top center, as the glass can break.
  5. Once loose, carefully tilt the glass forward and locate the electrical connector on the back (for heated mirrors).
  6. Press the small locking tab on the connector and disconnect it.

Step 2: Preparing for New Glass

  1. Thoroughly clean the exposed mirror backing plate/motor assembly in the housing. Remove any old adhesive residue or debris.
  2. Inspect the new mirror glass. Remove any protective film.
Rear view of two mirror glasses showing the adhesive backing with 'GLUE' pattern.

Image: Adhesive backing on the replacement mirror glass.

Step 3: Installing the New Mirror Glass

  1. First, connect the electrical connector from the vehicle's wiring harness to the back of the new mirror glass. Ensure it clicks and locks into place.
  2. Carefully align the new glass with the motor/backing plate. It often helps to hook the top edge in first.
  3. Gently press the bottom and sides until all clips snap securely into place. Listen for soft clicks.
  4. Do not press on the center of the glass. Apply pressure evenly around the edges.

Step 4: Final Checks

  1. Gently press around the perimeter to ensure a secure fit.
  2. Reconnect the vehicle battery.
  3. Test the power mirror adjustment function to ensure it moves smoothly in all directions.

4. Operating Instructions (Heated Mirror Function)

Some mirror types may include a heated function, as indicated in the product listing. To test this function:

  1. Start the engine.
  2. Activate the rear window defroster button (mirror heaters are typically on the same circuit).
  3. After a few minutes, carefully touch the mirror surface – it should feel warm.
  4. Caution: Do not run the heater for more than 10-15 minutes on a dry surface during testing to prevent damage. If your item type does not have heated functions, disregard this section.

5. Maintenance

To ensure longevity and clear visibility of your mirror glass:

  • Regularly clean the mirror surface with a soft cloth and appropriate glass cleaner.
  • Avoid abrasive cleaners or tools that could scratch the glass.
  • Periodically check the mirror's fitment to ensure it remains securely in place.

6. Troubleshooting

  • Mirror not adjusting electrically: Ensure the electrical connector is securely attached to the mirror glass and the vehicle's wiring harness. Verify the vehicle battery is reconnected.
  • Heated mirror not warming up: Confirm the rear window defroster is active. Check if your specific mirror model is equipped with the heating function.
  • Mirror feels loose after installation: Gently press around the perimeter of the mirror glass to ensure all clips are fully engaged and secured to the motor/backing plate.

7. Specifications

AttributeValue
Brand NameAUTOXBERT
Model NameFor Corsa D mirror glass
Model Year Compatibility2006-2019
Item TypeMirror & Covers
MaterialGlass
FeaturesConvex
Attachment TypeSelf-Adhesive
Items IncludedReplacement mirror glass supplied with adhesive
TypeStandard Mirror Assembly
Item Weight0.24 kg
External Testing CertificationISO9001
OriginMainland China
Approximate Dimensions (L x H)17.5 cm x 10.5 cm
Diagram showing dimensions of the mirror glass: 17.5cm length, 10.5cm height.

Image: Mirror glass dimensions.

8. User Tips

  • Verify Fitment: While designed for specific Corsa models, it is always recommended to compare the dimensions of the new mirror glass (17.5cm x 10.5cm) with your original mirror holder cup to ensure a perfect fit. Some users have noted slight variations, though the product generally fits well.
  • Quality Adhesive: The mirror glass comes with generous and effective adhesive, ensuring a strong bond.
  • Careful Packaging: The product is typically well-packaged, often including cleaning wipes, to ensure it arrives in excellent condition.
  • Original Look: Many users find the replacement glass to be practically identical to the original in appearance and quality.

9. Support & Contact

If you have any questions regarding fitment or installation, please contact the manufacturer or EU representative before proceeding with installation. It is helpful to provide your Vehicle Identification Number (VIN) and clear photos of your original mirror glass (front and back) for assistance.

A PDF version of the user manual is also available for download: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.