CCXTMT Keihin FCR Carburetor Easy Air Fuel Mixture Screw

Contents

Keihin FCR Carburetor Easy Air Fuel Mixture Screw User Manual

1. Product Overview

This manual provides instructions for the CCXTMT Keihin FCR Carburetor Easy Air Fuel Mixture Screw, a precision CNC machined component designed for Keihin FCR and FCR-MX carburetors. This part is engineered to replace original factory components, offering enhanced tuning capabilities for optimizing engine performance, throttle response, and overall riding smoothness.

The mixture screw features an O-ring design to secure adjustment settings and is numerically calibrated for easy tuning memory. It is constructed from durable 6061-T6 Aluminum with an anodized finish and comes complete with a spring, washer, and O-ring for installation.

Keihin FCR Carburetor Easy Air Fuel Mixture Screw installed in a carburetor, with a display of available colors.
Figure 1: Keihin FCR Carburetor Easy Air Fuel Mixture Screw installed in a carburetor, showing various color options.

2. Setup and Installation

Proper installation is crucial for the performance and safety of your motorcycle. It is recommended that installation be performed by professional personnel with motorcycle maintenance experience or at a professional repair shop.

2.1 Pre-Installation Check

  • Carefully check that the CCXTMT modification part model is compatible with your motorcycle model. Refer to the compatibility list in Section 6.
  • Confirm that the part is free of any damage or deformation.
  • Ensure all accompanying accessories, such as the spring, washer, and O-ring, are complete.

2.2 Installation Procedure

  1. Follow your motorcycle's service manual for the original factory part disassembly specifications to remove the existing air fuel mixture screw. This prevents damage to the vehicle body or the new modification part.
  2. Use appropriately sized tools (e.g., screwdriver, wrench) for installation.
  3. Insert the new CCXTMT Keihin FCR Carburetor Easy Air Fuel Mixture Screw, ensuring the O-ring, washer, and spring are correctly positioned.
  4. Tighten the screw according to the original factory torque specifications to prevent loosening or over-tightening. The connection strength must meet or exceed the original factory standard.
  5. After installation, ensure all connection parts are tight and there is no interference with other vehicle components.
Dimensional diagram of the Keihin FCR Carburetor Easy Air Fuel Mixture Screw with measurements.
Figure 2: Dimensional diagram of the mixture screw for fitment verification.

3. Operating and Tuning

The Easy Air Fuel Mixture Screw allows for precise adjustments to your carburetor's air-fuel mixture, optimizing engine intake efficiency and air intake. Proper tuning can lead to improved engine power output, enhanced throttle response, and smoother acceleration.

3.1 Adjustment Guidelines

  • The screw is numerically calibrated, allowing you to track your adjustments precisely. Note down your starting position and any changes made.
  • Adjust the screw in small increments (e.g., 1/4 or 1/2 turn) and test the motorcycle's performance.
  • The O-ring design helps secure your adjustment setting, preventing it from vibrating loose during operation.
  • Consult your motorcycle's service manual or a qualified mechanic for specific tuning procedures and recommended air-fuel mixture settings for your model and riding conditions.

3.2 Break-in Period

After replacing original factory parts with new CCXTMT modification parts, it is recommended to conduct a 500km break-in ride. During this period, avoid aggressive driving behaviors such as sudden acceleration, sudden braking, and prolonged high-speed driving. This allows full adaptation between the modification parts and the vehicle, ensuring subsequent stability and comfort.

4. Maintenance

Regular maintenance ensures the longevity and optimal performance of your mixture screw.

  • Regular Inspection: Periodically inspect the mixture screw for tightness. Tighten any loose bolts promptly according to factory specifications.
  • Environmental Protection: Avoid driving through deep water or muddy roads to prevent contamination. Avoid colliding or scratching the part to maintain its integrity.
  • Corrosion Prevention: As a metal part, avoid contact with strong acids and alkalis to prevent rust. Apply anti-rust oil regularly if necessary (except for stainless steel materials).
  • Cleaning: When cleaning the vehicle, avoid directly flushing the connection parts and seals of modification parts with a high-pressure water gun to prevent corrosion or water ingress. Wipe surface stains gently with a damp cloth; do not use corrosive cleaning agents.

5. Troubleshooting

If you experience any issues with your CCXTMT Keihin FCR Carburetor Easy Air Fuel Mixture Screw, follow these general troubleshooting steps:

  • Abnormal Noise or Performance Degradation: If you notice abnormal noise, leakage, performance degradation, or the part fails to meet the expected effect, immediately stop riding.
  • Inspection: Carefully inspect the mixture screw and surrounding carburetor components for any visible damage, looseness, or incorrect installation.
  • Eliminate Fault Cause: Address any identified issues (e.g., re-tighten, clean, or re-install correctly).
  • Professional Assistance: If the problem persists or you are unsure about the cause, consult a professional motorcycle mechanic.

6. Specifications

Feature Description
Product Name Keihin FCR Carburetor Easy Air Fuel Mixture Screw
Brand CCXTMT
Condition 100% Brand New
Quantity 1x Fuel Mixture Screw (with spring, washer, O-ring)
Material 6061-T6 Aluminum
Finish Anodized
Colors Available Red, Green, Blue, Black, Gold, Silver, Orange
Item Weight 0.01kg
Item Height 1cm (approximate, based on general product properties)
Item Width 4cm (approximate, based on general product properties)
External Testing Certification ISO9001
Item Type Carburetor Part
Dimensions (approx.) Overall Length: ~54mm (segments: 18mm, 5mm, 12mm, 3mm, 16mm); Screw Diameter: 6mm (body), 3mm (tip)

6.1 Compatibility (Fits all Keihin FCR & FCR-MX Carburetors)

Reference fit models include, but are not limited to:

  • For Honda: CRF150R (2007-2009, 2012-2016), CRF150R Expert (2007-2009, 2012, 2015-2016), CRF250R (2004-2009), CRF250X (2004-2009, 2012-2013, 2015), CRF450R (2002-2008), CRF450X (2005-2009, 2012-2015), TRX450R (2006-2009, 2012-2013), TRX450R (Electric Start) (2009, 2014)
  • For Kawasaki: KLX450R (2008-2009), KX250F (2004-2010), KX450F (2006-2009)
  • For KTM: 250 SX-F (2005-2011), 250 XC-F (2008-2009), 250 XCF-W (2007-2010, 2012-2014), 400 XC-W (2009-2010), 450 EXC (2003-2011), 450 MXC (2003-2005), 450 SX (2003-2006), 450 SX-F (2008-2012), 450 XC (2007, 2008-2009), 450 XC-F (2008-2009), 450 XC-W (2012), 505 SX-F (2007-2008), 505 XC-F (2008), 525 EXC (2003-2007), 525 MXC (2003-2005), 525 SX (2003-2006), 525 XC (2006-2007, 2008-2009), 530 EXC (2009-2011)
  • For Suzuki: RM-Z250 (2004-2009), RM-Z450 (2005-2008)
  • For Yamaha: WR250F (2001-2009, 2011-2013), WR426F (2001-2002), WR450F (2003-2009, 2011), YFZ450 (2004-2009, 2013), YZ250F (2001-2013), YZ426F (2000-2002)

*This part might fit other makes and models. Please verify fitment before purchase. Refer to your service manual or contact your OEM dealer if unsure.

7. User Tips

  • Track Your Settings: Utilize the numerically calibrated markings on the screw to keep track of your adjustments. This allows for easy return to previous settings or precise incremental changes.
  • Small Adjustments: When tuning, make small adjustments (e.g., 1/4 turn) and test the bike's response before making further changes.
  • Secure Fit: Always ensure the O-ring is in good condition and properly seated to maintain the desired adjustment and prevent air leaks.

8. Warranty and Support

If a CCXTMT modification part has quality issues, do not disassemble or repair it yourself. Contact the purchasing merchant or CCXTMT after-sales service in a timely manner. You can enjoy the brand's independent warranty service with the purchase certificate. Refer to the product warranty card for specific warranty periods and terms to ensure post-replacement usage guarantee.

9. Safety Warnings

  • Legal Compliance: This series of CCXTMT modification parts is only for legal and compliant replacement of corresponding original factory motorcycle parts. Modifications must comply with local traffic regulations and shall not exceed the scope permitted by law. Non-compliance may result in penalties and affect vehicle annual inspection.
  • Adaptation Period: After replacing original factory parts with modification parts, the vehicle's performance, handling feel, and comfort may be optimized. Riders need to gradually adapt to these changes to avoid safety accidents caused by unfamiliarity with new performance.
  • No Unauthorized Modification: Do not arbitrarily modify or disassemble CCXTMT modification parts a second time. Doing so may cause part damage and performance failure, leading to potential safety hazards and loss of brand warranty service.
  • Immediate Stop on Abnormality: If any abnormality is found in CCXTMT modification parts during use (e.g., abnormal noise, leakage, performance degradation, or failure to meet the expected effect), immediately stop riding, inspect, and eliminate the fault cause before continuing to use.

© 2023 CCXTMT. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.