Introduction
Thank you for choosing the Paipaitek PD258S Anti-Barking Dog Collar. This device is designed to help train your dog to reduce excessive barking through a combination of warning tones and static correction. It is suitable for small and medium-sized dogs and features an IP65 waterproof rating and adjustable sensitivity levels. Please read this manual thoroughly before use to ensure proper and safe operation.
Package Contents
Carefully unpack your Paipaitek PD258S Anti-Barking Dog Collar and ensure all items are present. The package should include:
- 1 x Bark Stop Device (Collar Unit)
- 1 x Nylon Collar Strap
- 1 x USB Charge Cable
- 1 x Test Light
- 2 x Short Electric Columns (Contact Points)
- 2 x Long Electric Columns (Contact Points)
- 2 x Anti-abrasion Buckles (Silicone Cases)
- 1 x User Manual (this document)


Product Overview
The PD258S anti-barking collar is designed with advanced features to ensure effective and humane training for your dog. It incorporates a battery charging circuit, energy-saving design, and automatic self-protective features. The device is not easily disturbed by other noises, ensuring accurate bark detection.
Main Features:
- Battery Charging Circuit: Energy-saving design with automatic self-protective features.
- Noise Immunity: Not easily disturbed by other noises, ensuring accurate bark detection.
- Size Suitability: Model 'S' is suitable for most middle-small sized dogs.
- Adjustable Sensitivity: 5 levels of adjustable sensitivity to match your dog's barking noise.
- Correction Levels: 7 correction levels, starting with warning tones and progressing to mild static shock if barking persists.
- IP65 Waterproof: Designed to withstand splashes and light rain.

Setup
1. Charging the Device
The anti-barking collar is rechargeable. Connect the USB charge cable to the charger interface on the collar and a suitable USB power source. During charging, a red light will twinkle. Once fully charged, the light will stop twinkling and remain solid red. A full charge typically takes 1 hour and provides up to 10-14 days of standby time.

2. Power On/Off
- To Turn On: Press the power button briefly.
- To Turn Off: Press and hold the power button for one second.
3. Installing Contact Points and Anti-abrasion Buckles
Choose the appropriate length of contact points (short or long) based on your dog's fur thickness. Screw them firmly into the collar unit. For added comfort and to prevent skin abrasion, place the blue silicone anti-abrasion buckles over the contact points.
4. Attaching the Nylon Collar Strap
Thread the nylon collar strap through the slots on the collar unit. Adjust the strap to fit your dog comfortably.

5. Fitting the Collar on Your Dog
Correct wearing position is crucial for healthy and effective pet training. The device should be placed on the bottom of your pet's neck, with the contact points directly touching the skin. Ensure there is a finger's distance between the collar and your dog's neck; it should not be too loose, as this can reduce the effectiveness of the static correction. If your pet has thick fur, use the longer contact points. If necessary, trim the hair under your dog's neck to ensure proper contact.
6. Adjusting Sensitivity
The PD258S has 5 adjustable sensitivity levels. The default level is three. To adjust: press the '+' or '-' button. The device will beep to indicate the current level. A higher sensitivity level means the collar will activate more easily in response to barking.
7. Testing the Collar
To test the static correction function, place the white test lamp on the two electrodes (contact points) of the anti-bark collar. Then, blow into the sensor located in the middle of the collar unit or simulate a loud dog bark. After the anti-bark collar activates for the third time, the test lamp should gleam, indicating the static correction is working.
Operating Instructions
The Paipaitek PD258S collar uses a progressive correction system to train your dog. The system is designed to be humane and effective, gradually increasing the intensity of correction if barking persists.
7 Correction Levels:

- First 2 Barks: The anti-bark collar will emit warning tones.
- 3rd Bark (within 30 seconds): A more intense tone is sounded along with a mild static shock.
- 4th Bark (within 30 seconds): Emits warning and 2-level static shock.
- 5th Bark (within 30 seconds): Emits warning and 3-level static shock.
- 6th Bark (within 30 seconds): Emits warning and 4-level static shock.
- 7th Bark (within 30 seconds): Emits warning and 5-level static shock.
- 1-Minute Automatic Protection Mode: If the dog continues to bark after 7 corrections, the collar will enter a 1-minute automatic protection mode and stop corrections to prevent over-stimulation.
The static shock intensifies with each subsequent bark to encourage the dog to associate the alarm sound with the correction. The shocks are designed not to harm the dog. This gradual enhancement helps the dog quickly understand that barking triggers the correction.
Automatic Self-Protective Mode:
- The collar will automatically reset after the dog stops barking for 30 seconds.
- If the collar continuously activates for 7 times, the guiding light will quickly twinkle, and the collar will stop working for 1 minute to protect the dog. After this minute, it will switch back to standby mode.
Maintenance
Battery Care:
- When the battery is low, the anti-barking collar will shut down automatically. Please charge it promptly.
- Use a USB charger with parameters: Input 100-240V~50/60HZ, Output 5V 1000mA (or 300mA/500mA).
Collar Care:
- Prevent dogs from biting the anti-barking collar. The product is made with non-digestible plastic and electronic components. If swallowed, seek veterinary attention immediately.
- Avoid tying the leash to the anti-barking collar strap.
- The anti-abrasion buckle helps prevent skin abrasion. We suggest using it 2-3 times a week.
- Periodically check your dog's neck skin. If you observe any side effects like allergy, erythema, or bedsores due to prolonged or overly tight wear, remove the collar immediately. Re-use only after the skin condition improves.
- Keep the anti-barking collar away from water when not in use, although it is IP65 waterproof, prolonged submersion is not recommended.
Troubleshooting
Checking Receiver Power:
When the receiver is turned on, press the power button twice quickly to check the power level:
- 5 beeps: 100% (80-100%)
- 4 beeps: 80% (60-80%)
- 3 beeps: 60% (40-60%)
- 2 beeps: 40% (20-40%)
- 1 beep: 20% (1-20%)
Common Issues:
- Collar not activating or only sound works:
- Ensure the contact points are making direct contact with your dog's skin. Trim fur if necessary.
- Check battery level and recharge if low.
- Adjust sensitivity to a higher level.
- Verify the static correction with the test light as described in the 'Testing the Collar' section.
- Dog reacts strangely or barks intensely when first wearing:
- This is normal for some dogs. Stay away initially to avoid any rare biting incidents. Once calm, you can approach.
- Allow time for your dog to get used to the collar and the corrections.
- Collar triggers without barking (rarely):
- While the PD258S uses advanced technology to distinguish barks, intense scratching or impact can rarely trigger it.
- Check your dog for fleas or ear mites if this occurs, and consult a vet if needed.
- Difficulty understanding instructions:
- This manual aims to provide clear, step-by-step guidance. Please re-read relevant sections carefully.
- Refer to the provided video demonstrations for visual assistance.
- If you have further questions, please contact customer support or your distributor.
Specifications
| Feature | Specification |
|---|---|
| Model Number | PD258S |
| Brand Name | PaiPaitek |
| Item Type | Training Collars |
| Target Pet | Dog (Small and medium sized dogs) |
| Material | Plastic |
| Function | Warning sound and electric shock |
| Sensitivity | 5 levels adjustable |
| Battery Included | Yes |
| Rechargeable | Yes |
| Standby Time | Up to 14 days |
| Waterproof Rating | IP65 |
| Certificates | CE/ Rohs/ Fcc verified |
| Package Dimensions (L x W x H) | 8 cm x 8 cm x 5 cm |
| Package Weight | 0.12 kg |
User Tips
- Strategic Use: Some users find it effective to only put the collar on when they are working, or when people are outside, and to remove it at night. This can help the dog associate the collar with specific situations where barking is undesirable.
- Consistency is Key: For best results, use the collar consistently according to the training instructions. Stopping training too early might negate initial progress.
- Monitor Your Pet: Regularly check your dog's neck for any signs of irritation or discomfort. Ensure the collar is not too tight.
- Patience: Training takes time and patience. The collar is a tool to aid in training, but consistent application and monitoring are essential.
Warranty and Support
Warranty:
This product comes with a 12-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
Further Assistance:
For additional information, detailed diagrams, or if you encounter any issues not covered in this manual, please refer to the official user manual PDF available from the seller. You can typically find this document on the product's purchase page or by contacting customer support.
If you have any further questions or require technical support, please contact the seller or your local distributor.
Important Safety Warnings
- This anti-barking collar is intended for use on dogs only. Do not use it on other animals or for any purpose other than dog training.
- Do not leave the collar on your dog for more than 12 consecutive hours. Prolonged wear can cause skin irritation.
- Ensure the collar is fitted correctly, not too tight or too loose, to prevent discomfort or ineffective operation.
- Monitor your dog's reaction to the collar, especially during initial use. If your dog shows signs of extreme stress or aggression, discontinue use and consult a professional trainer or veterinarian.
- Keep out of reach of children.
- Do not attempt to modify or repair the device yourself. This may void the warranty and pose safety risks.