1. Introduction
The QIACHIP 4CH Smart WiFi Switch Smart Relay Module is a versatile device designed to integrate your electrical appliances into a smart home system. It supports multiple power inputs (DC 5V via USB Type-C, or DC 7V-48V) and offers control via Wi-Fi, RF, and Bluetooth-compatible methods. This module allows you to remotely control up to four independent channels, making it ideal for automating lights, motors, garage doors, and other devices. It is compatible with popular smart home platforms like eWeLink, Google Home, Amazon Alexa, SmartThings, and Yandex Alice.

2. Safety Information
Please read and understand all safety instructions before installing and operating this device. Improper installation or use can be dangerous or cause damage to the device and connected appliances.
- Ensure power is disconnected before performing any wiring or maintenance.
- All wiring should be performed by a qualified electrician or in accordance with local electrical codes.
- Do not exceed the maximum current and voltage ratings of the relay module (AC 0-250V 10A, DC 7-48V 10A).
- Keep the device away from water, moisture, and high temperatures.
- This device is designed for indoor use only.
3. Product Overview
The QIACHIP Smart Relay Module features four independent relay channels, allowing for separate control of multiple devices. It can be powered via a modern USB Type-C port or a DC 7V-48V input. The module's compact design (approximately 48mm x 63mm) allows for flexible installation in various settings.

3.1 Application Scenarios
This smart relay module is suitable for a wide range of applications, including:
- Smart Home Automation: Control lights, fans, water heaters, and other household appliances.
- Garage Door Control: Open and close garage doors remotely.
- Motor Control: Integrate with various motors for automated functions.
- Car Trunk Control: Remote access to car trunks.
- Door Access Systems: Control electronic door locks.

4. Specifications
| Feature | Specification |
|---|---|
| Model Number | eWeLink Smart Wifi Switch (KR0548 Series) |
| Brand Name | QIACHIP |
| Communication Method | RF, Wi-Fi |
| Power Input | USB Type-C 5V, DC 7V-48V |
| Relay Output (Dry Contact) | AC 0-250V 10A, DC 7-48V 10A |
| State of Assembly | Ready-to-Go |
| Compatibility | All Compatible (eWeLink, Google Home, Amazon Alexa, SmartThings, Yandex Alice) |
| Camera Equipped | No |
| Dimensions | 63mm x 48mm |
| Origin | Mainland China |
5. Setup Instructions
5.1 Powering the Module
The module can be powered using either a USB Type-C 5V power supply or a DC 7V-48V input. Connect the appropriate power source to the module.

5.2 App Installation
Download the eWeLink app from your smartphone's app store (Google Play for Android or App Store for iOS). The app is essential for Wi-Fi control and advanced settings.
5.3 Device Pairing (eWeLink App)
Follow these steps to pair your smart relay module with the eWeLink app:
- Power On: Connect the module to a power source (USB Type-C or DC 7V-48V). The blue LED indicator on the module should light up.
- Enter Pairing Mode: Press and hold the pairing button on the module for five seconds until the blue LED indicator blinks twice and pauses, then blinks rapidly. This indicates it's in pairing mode.
- Open eWeLink App: Launch the eWeLink app on your smartphone.
- Add Device: Tap the '+' icon or 'Add Device' button in the app.
- Select Pairing Method: Choose 'Bluetooth Pairing' for initial setup. The app will guide you through the process.
- Connect to Wi-Fi: Select your 2.4GHz Wi-Fi network and enter the password. The module only supports 2.4GHz Wi-Fi.
- Complete Pairing: Wait for the app to connect to the device. Once successful, the device will be added to your eWeLink account.
5.4 Wiring the Module
The module provides dry contact relay outputs, meaning the relay contacts are isolated from the module's power supply. This allows you to control both AC and DC loads within the specified voltage and current limits.
General Wiring Principle:
- Connect your power source (USB Type-C 5V or DC 7V-48V) to the module's power input terminals.
- For each channel, connect the load (e.g., light, motor) to the corresponding relay output terminals (NO/NC/COM). The wiring diagram in Figure 4 illustrates connecting lights to the relay outputs.
- Ensure all connections are secure and insulated.
Note: For controlling 220V AC loads, it is recommended to use an additional external power relay for safety and to ensure easy replacement, as the module's internal relays are soldered.
5.5 Pairing with an RF Remote Control (Optional)
If your module comes with an RF remote control or you wish to add one, follow these steps:
- In the eWeLink app, navigate to the device settings for your smart relay module.
- Look for an option like 'eWeLink Remote' or 'Add Remote'.
- Follow the on-screen tutorial. Typically, you will tap a button in the app to initiate learning, then press the corresponding button on your physical RF remote control to complete the pairing.

6. Operating Instructions
6.1 App Control
Once paired, you can control the module via the eWeLink app:
- Individual Channel Control: On the device screen in the app, you will see buttons for each channel (Channel 1, Channel 2, Channel 3, Channel 4). Tap these buttons to toggle the connected device on or off.
- All On/All Off: The app also provides 'ALL ON' and 'ALL OFF' buttons to control all four channels simultaneously.
- Smart Timer: Set schedules, countdowns, and loop timers for automated operation.
- Share Control: Share control of the device with other eWeLink users.


6.2 Power-on State Settings
You can configure the module's behavior after a power outage:
- Off after power-on: The device will remain off when power is restored.
- On after power-on: The device will turn on when power is restored.
- Maintain status before power-off: The device will return to its last known state before the power outage.
6.3 Inching Settings
The inching feature allows you to set the relay to momentarily turn on or off for a specified duration. This is useful for applications like garage door openers or momentary button presses.
- Set to normally open or normally closed states.
- Configure the timing duration for the inching action.
6.4 Voice Control
The module is compatible with popular voice assistants:
- Amazon Alexa: Link your eWeLink account to Alexa to control devices with voice commands (e.g., "Alexa, turn on Channel 1").
- Google Home: Link your eWeLink account to Google Home for voice control (e.g., "Hey Google, turn off the garage light").
- Yandex Alice: Similar integration for Yandex Alice users.
7. Maintenance
- Keep the device clean and free from dust.
- Avoid exposing the device to extreme temperatures or humidity.
- Regularly check wiring connections for tightness and signs of wear.
- Ensure the eWeLink app and device firmware are updated to the latest versions for optimal performance and security.
8. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Device not pairing with eWeLink app. | Ensure the module is in pairing mode (LED blinking rapidly). Check that your phone is connected to a 2.4GHz Wi-Fi network. Keep the phone close to the device during pairing. Try restarting the module and your phone. |
| Wi-Fi connection issues. | Verify your Wi-Fi password. Ensure your router is broadcasting a 2.4GHz network. The module does not support 5GHz Wi-Fi. Check for MAC address filtering on your router. |
| App control delays. | Check your Wi-Fi signal strength. Ensure your internet connection is stable. Using the physical RF remote control may offer more immediate response. |
| RF Remote control not pairing. | Follow the specific pairing instructions in the eWeLink app under 'eWeLink Remote'. Ensure you are pressing the correct button on the remote during the learning process. |
| Device not responding. | Check power supply to the module. Verify all wiring connections. Restart the module. |
| Cannot connect to Tuya or HomeKit. | This module is primarily designed for eWeLink and its integrated platforms (Alexa, Google Home, SmartThings, Yandex Alice). Direct Tuya or HomeKit support is not available for this specific model. |
9. User Tips
- Power Supply Versatility: The module supports both USB-C 5V and DC 7-48V power inputs, offering flexibility for various projects.
- Dry Contact Relays: The 'clean' contacts of the relays allow for versatile control of different voltage loads, including AC and DC, without mixing power sources.
- Home Assistant Integration: Users have successfully integrated this module with Home Assistant using the Sonoff integration, allowing for advanced automation.
- Remote Control Responsiveness: While the app may experience slight delays depending on network conditions, the RF remote control provides very responsive and direct control.
- Space-Saving Design: Its small size makes it easy to adapt and install in tight spaces.
- External Relay for High Voltage: For controlling 220V AC loads, consider adding an external power relay. The module's internal relays are soldered and not easily replaceable.
- No Mounting Holes: Be aware that the module may not come with pre-drilled holes for mounting in a box, requiring custom solutions for enclosure.
10. Warranty & Support
For detailed warranty information and further support, please refer to the official user manual PDF provided by the manufacturer. You can access the PDF manual via this link: View User Manual (PDF).
For technical assistance or product inquiries, please contact QIACHIP customer support.