1. Introduction
The ANENG A3009 is a compact, intelligent, pen-type digital multimeter designed for safe and efficient electrical measurements. Featuring a voice broadcast function, it automatically identifies DC and AC voltage, and resistance. It also allows manual switching to measure capacitance, diode, continuity, non-contact voltage (NCV), zero live wire, phase sequence, and temperature. This versatile tool is ideal for laboratories, factories, electronics enthusiasts, and household use.

Figure 1: ANENG A3009 Key Features Overview
Features include Voice broadcast, Diode, Resistance, Capacitance, AC/DC voltage, Flashlight, Data retention (Hold), Reverse screen, Sound and light alarm, Phase Sequence Detection, Voltage Sensing, Zero FireWire, Buzzer, Temperature, Comfortable feel, and Automatic shut-down.
2. Safety Information
- Always ensure the multimeter is in good working condition before use.
- Do not use the device if it appears damaged or if the insulation is compromised.
- Do not exceed the maximum input values specified for each measurement range.
- Exercise extreme caution when working with live circuits. High voltages can be dangerous.
- Before measuring capacitance, ensure the capacitor is fully discharged to prevent damage to the meter or injury.
- Replace batteries promptly when the low battery indicator appears to ensure accurate readings.
- Keep the device dry and clean. Do not expose it to extreme temperatures or humidity.
3. Package Contents
Please check the package for the following items:
- 1x Product Box
- 1x User's Manual
- 1x Pen Multimeter (ANENG A3009)
- 1x Black Test Pen
- Combination Accessories: Extended nickel-plated copper needle, Banana tip, Nickel-plated copper needle, Conical needle (various types), U-shaped insert, Alligator clip.

Figure 2: ANENG A3009 Package Contents
The image displays the multimeter, test lead, various tips, and the user manual within its product box.
4. Product Overview
Familiarize yourself with the components of your ANENG A3009 multimeter:

Figure 3: ANENG A3009 Multimeter Components
Dimensions: 22mm/0.86in (width at top), 25mm/0.98in (width at middle), 170mm/66.9in (height).
- Battery Cover: Access point for battery replacement.
- Portable Pen Clip: For convenient carrying.
- Power/Function Switch: Long press to power on/off; single press to switch functions.
- Data Hold Key (HOLD): Press to freeze the current reading on the display.
- Flashlight/NCV/LIVE/Phase Sequence Button (N/L/P): Long press for flashlight; single press for NCV induction, LIVE zero live wire identification, or phase sequence detection.
- LCD Color Reverse Display: High-definition VA display for clear readings, even in dark environments.
- Signal Indicator: Provides visual feedback (e.g., red light for live wire).
- Torch Light: Illuminates the measurement area.
- Input End Protective Glue: Protects the internal connections.
- Test Tip: The positive test point for measurements.
5. Setup
5.1 Battery Installation
The instrument uses a single 1.5V AAA battery. To install or replace the battery:
- Locate the battery cover (1) at the top of the multimeter.
- Unscrew or slide open the battery cover.
- Insert one 1.5V AAA battery, observing the correct polarity (+/-).
- Close the battery cover securely.
5.2 Connecting the Test Lead
To use the black test pen:
- Remove the top cover of the pen multimeter.
- Insert the black test lead into the designated jack at the top of the multimeter.
5.3 Detachable Test Tip
The multimeter features a detachable nickel-plated tip, allowing for replacement with different measuring nibs:
- Carefully unscrew the existing metal nib using pliers.
- Replace it with the desired measuring nib from the accessory kit.
- Ensure the new nib is securely fastened.

Figure 4: Detachable Tip and VA Display
The image shows how to unscrew the tip with pliers and highlights the clear VA color reverse display.
6. Operating Instructions
6.1 Power On/Off and Function Switching
- Power On/Off: Long press the Power/Function Switch (3) to turn the multimeter on or off.
- Function Switch: While powered on, single press the Power/Function Switch (3) to cycle through available measurement functions.
6.2 Data Hold
Press the Data Hold Key (HOLD) (4) to freeze the current reading on the LCD display. Press it again to release the hold function.
6.3 Flashlight
Long press the Flashlight/NCV/LIVE/Phase Sequence Button (N/L/P) (5) to turn the built-in flashlight on or off. This helps illuminate dark measurement areas.
6.4 Non-Contact Voltage (NCV) Detection
Single press the N/L/P button (5) until NCV mode is selected. Bring the tip of the multimeter close to an AC voltage source. The device will indicate the presence of voltage without direct contact.
6.5 Zero Fire Wire (LIVE) Identification
This function helps distinguish between live (fire) and neutral (zero) wires.
- Single press the N/L/P button (5) to select the LIVE mode.
- Insert the electric pen tip into the jack (e.g., a wall socket).
- Live Wire: If it's a live wire, the signal indicator (7) will show a red light, and a quick beep alert will sound.
- Zero Line (Neutral): If it's a neutral wire, there will be no red light and no beeping sound.

Figure 5: Zero Fire Wire Identification
The image illustrates inserting the pen into a socket to identify live (red light, beep) vs. neutral (no light, no beep) wires.
6.6 Phase Sequence Detection
This function helps determine the phase sequence (clockwise or counterclockwise) in three-phase systems.
- Single press the N/L/P button (5) to select the phase sequence detection mode.
- Measuring Point A: When the 'A' symbol flashes on the screen, press the pen tip against the first phase line and wait for a beep.
- Measuring Point B: When the 'B' symbol flashes, press the pen tip against the second phase line and wait for a beep.
- Measuring Point C: When the 'C' symbol flashes, press the pen tip against the third phase line and wait for a beep.
- The display will then indicate 'PABC' for positive phase sequence (clockwise) or 'RABC' for reverse phase sequence (counterclockwise).

Figure 6: Phase Sequence Detection
The image shows the multimeter detecting phase sequence by touching points A, B, and C, indicating positive (clockwise) or reverse (counterclockwise) phase.
6.7 Measurement Functions
The ANENG A3009 can automatically identify AC/DC voltage and resistance. For other functions, cycle through modes using the Power/Function Switch (3).

Figure 7: Capacitance, Temperature, and Diode Measurement
Illustrates the process for measuring capacitance, temperature, and diode values.
- AC/DC Voltage Measurement: The meter automatically identifies AC or DC voltage. Touch the test tip to the circuit point to measure. (e.g., Household AC voltage is about 220V; a 1.5V battery measures about 1.5V).
- Resistance Measurement: The AUTO function automatically recognizes resistance. Touch the test tip to the component to measure its resistance.
- Capacitance Measurement: Switch to the capacitance gear. For safety, ensure the capacitor is short-circuited to discharge before measurement. Then, touch the test tip to the capacitor terminals to measure its value.
- Diode Measurement: Switch to the diode gear. Touch the test tip to the diode terminals to distinguish positive and negative and measure the forward voltage drop.
- Continuity Test (Buzzer): Switch to the continuity mode. If there is a buzzer sound, the circuit is continuous, and the fuse is normal. No buzzer sound indicates an open circuit or a damaged fuse.
- Temperature Measurement: The multimeter can detect the current ambient temperature. The display can be switched between °C and °F.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the multimeter. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace the AAA battery when the low battery indicator appears on the display to ensure measurement accuracy.
- Storage: When not in use for extended periods, remove the battery to prevent leakage. Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Test Tip: Inspect the test tip regularly for wear or damage. Replace if necessary using the provided accessories.
8. Troubleshooting
- Multimeter does not power on: Check if the battery is installed correctly and has sufficient charge. Replace the battery if necessary.
- Inaccurate readings: Ensure the battery is not low. Check that the test tip is making good contact with the circuit. Ensure the correct measurement function is selected.
- No continuity beep: Check if the circuit is truly closed. If the circuit is closed and there's no beep, the internal fuse might be damaged (though this model is generally self-protected).
- Display is dim or flickering: Replace the battery.
9. Specifications
| Function | Range | Resolution | Precision |
|---|---|---|---|
| AC Voltage | 0.8-1000V | 0.001-1V | ±(1.2%+5d) |
| DC Voltage | 0.8-700V | 0.001-1V | ±(1.5%+8d) |
| Resistance | 0.1-600MΩ | 0.01Ω-10KΩ | ±(3.5%+8d) |
| Capacitance | 10nF-60mF | 10pF-100uF | ±(1.5%+5d) |
| Real-time Temperature | 20°C-50°C / 0°F-122°F | 1°C / 1°F | ±(1.0%+5°C)<50°C / ±(0.75%+5°F)<122°F |
| Max Count | 6000 counts | ||
| Material | ABS | ||
| Battery Model | One AAA battery | ||
| Weight | 40g (without battery) | ||
| Automatic Shut-down | 5 minutes without any operation | ||
| Display | VA color reverse display | ||
| Special Features | Voice broadcast, Data retention, Flashlight, Phase sequence detection, Zero Fire Wire, NCV induction | ||
Note: The above parameters are for reference only; actual measurements may vary slightly based on specific equipment and environmental conditions.
10. User Tips
- The ANENG A3009 is highly practical and versatile for basic electrical measurements, making it an excellent tool for amateur DIY enthusiasts.
- Its compact pen-type design takes up minimal space in your toolkit, making it convenient for on-the-go use.
- While the voice broadcast function is useful, some users note the voice quality may be slightly nasal; however, it remains effective for conveying information.
11. Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.