Dragon Gauge 6144

Contents

52mm Car Water Temperature Gauge Instruction Manual

Model: 6144

1. Introduction

Thank you for purchasing the 52mm Car Water Temperature Gauge. This instrument is designed to accurately measure and display your vehicle's engine coolant temperature, providing crucial information for maintaining optimal engine performance and preventing overheating. This manual will guide you through the installation, operation, and maintenance of your new gauge.

Overview of the 52mm Water Temperature Gauge kit
Figure 1: Overview of the 52mm Water Temperature Gauge kit, including the gauge, water temperature sensor, water temp joint pipe adapter, and hose clamps.

2. Specifications

Feature Detail
Gauge Size 2 inch (52 mm diameter)
Backlight White
Display Range 40~140℃
Power Supply Professional 12V (IGN MAX 0.3A)
Sensor Thread Size 1/8NPT
Material Plastic + Metal
Item Weight 0.4 kg
Item Dimensions (Gauge) 57mm (Length) x 50mm (Width) x 58mm (Height)
Origin Mainland China
Special Features Measure and display car water temperature
Dimensions of the 52mm water temperature gauge
Figure 2: Dimensions of the 52mm water temperature gauge, indicating a diameter of 57mm and a depth of 58mm.
Dimensions of an optional 52mm gauge holder
Figure 3: Dimensions of an optional 52mm gauge holder, measuring 112mm (4.40in) in height and 87mm (3.42in) in width.

3. Package Contents

The standard package includes the following items:

  • 1x Digital Water Temperature Gauge (40-140℃)
  • 1x Water Temperature Sensor (1/8NPT size)
  • 1x Wiring Harness
  • 1x Water Temperature Joint Pipe Sensor Adapter (available in various sizes: 26MM, 28MM, 30MM, 32MM, 34MM, 36MM, 38MM, 40MM)
  • 2x Hose Clamps
  • 1x Screw Knob
  • 1x English Manual
Contents of the product package
Figure 4: Contents of the product package, including the gauge, sensor, wiring, adapter, clamps, screw knob, and English manual.
Various sizes of the blue aluminum water temperature joint pipe adapters
Figure 5: Various sizes of the blue aluminum water temperature joint pipe adapters (26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm).
Detailed dimensions of the water temperature joint pipe adapter
Figure 6: Detailed dimensions of the water temperature joint pipe adapter, showing a 9mm (1/8NPT) sensor thread and overall length of 68mm.

4. Installation

Important: Professional installation is highly recommended. Disconnect the vehicle's battery before starting any electrical work.

4.1. Electrical Wiring

Follow the wiring diagram below for proper electrical connections:

  • RED Wire: Connect to Battery (+) 12V (Constant Power)
  • WHITE Wire: Connect to Ignition Switch 12V (+) (Switched Power)
  • YELLOW Wire: Connect to Light Switch 12V (+) (for Backlight)
  • BLACK Wire: Connect to Battery (-) (Ground)
  • GREEN Wire: Connect to Water Temperature Sensor

Note: The water temperature sensor itself does not require a separate ground wire if it has two wires. Ensure the sensor is properly grounded through its connection to the engine block or the joint pipe adapter for accurate readings. If the sensor is not grounded, it may only show 40℃.

4.2. Sensor and Adapter Installation

The water temperature sensor needs to be installed into the cooling system using the provided joint pipe adapter. This adapter is designed to be inserted into a suitable silicone hose in your vehicle's cooling system.

  1. Locate a suitable section of the radiator hose where the adapter can be installed. Ensure there is enough space and that the hose is easily accessible.
  2. Drain a sufficient amount of coolant from the radiator to prevent spillage when cutting the hose.
  3. Carefully cut a section of the radiator hose to accommodate the length of the joint pipe adapter.
  4. Insert the water temperature joint pipe adapter into the cut section of the hose.
  5. Secure the adapter in place using the two provided hose clamps, ensuring a tight, leak-free seal.
  6. Thread the 1/8NPT water temperature sensor into the designated port on the joint pipe adapter. Use thread sealant to prevent leaks.
  7. Reconnect the coolant hoses and refill the cooling system to the appropriate level. Bleed any air from the system as per your vehicle's service manual.
Wiring diagram and sensor installation
Figure 7: Wiring diagram for the electrical gauge (Red to Battery(+), White to Ignition Switch 12V(+), Yellow to Light Switch 12V(+), Black to Battery(-), Green to sensor) and a diagram for installing the water temperature sensor into the silicone hose using the joint pipe adapter.

4.3. Gauge Mounting

Mount the 52mm gauge in a suitable location on your dashboard or A-pillar using a gauge cup or stand (if purchased separately). Ensure the mounting location does not obstruct your view of the road or interfere with vehicle controls.

Front view of the water temperature gauge, showing its appearance with and without the white backlight activated
Figure 8: Front view of the water temperature gauge, showing its appearance with and without the white backlight activated.

5. Operation

Once properly installed and wired, the water temperature gauge operates automatically:

  1. Turn your vehicle's ignition to the 'ON' position. The gauge should power on and display the current water temperature.
  2. If the yellow wire is connected to the light switch, the white backlight will illuminate when your vehicle's headlights or parking lights are turned on.
  3. Monitor the gauge during vehicle operation. The normal operating temperature range for most engines is typically between 80℃ and 100℃. Consult your vehicle's manufacturer specifications for precise normal operating temperatures.
  4. If the temperature consistently reads above the normal range (e.g., approaching 120℃ or higher), it indicates potential engine overheating. Pull over safely and investigate the cause.

6. Maintenance

The 52mm Car Water Temperature Gauge requires minimal maintenance:

  • Cleaning: Wipe the gauge face with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the display.
  • Connections: Periodically check all electrical connections and hose clamps for tightness and corrosion. Ensure the sensor connection remains secure.
  • Coolant Levels: Regularly check your vehicle's coolant level and condition as part of routine vehicle maintenance.

7. Troubleshooting

Problem Possible Cause Solution
Gauge does not power on No power to red or white wire; faulty ground connection; blown fuse. Check power connections (Red, White), ensure Black wire is properly grounded. Inspect vehicle fuses.
Gauge always reads 40℃ Water temperature sensor not properly grounded. Ensure the water temperature sensor is correctly grounded through its connection to the engine block or the joint pipe adapter.
Inaccurate temperature readings Loose sensor connection; air in cooling system; faulty sensor. Check sensor wiring and tightness. Bleed cooling system. Replace sensor if necessary.
Coolant leak at adapter Hose clamps not tight enough; no thread sealant on sensor; damaged hose. Tighten hose clamps. Apply thread sealant to sensor. Inspect and replace damaged hoses.

8. User Tips

  • Always ensure the water temperature sensor is properly grounded for accurate readings.
  • Double-check all electrical connections and hose clamps before refilling the coolant and starting the engine.
  • Use a high-quality thread sealant on the sensor threads to ensure a leak-free installation.
  • Consider installing the gauge in a location that is easily visible but does not distract from driving.

9. Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims or technical support, please contact your retailer or the manufacturer directly.

A detailed user manual in PDF format is available for download at https://manuals.plus/m/306c7bd61e15c5f1d54401473583bed5654c49cae403ef40ae4d5a375857ff91.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.